The impacts of thermal treatments on the physical properties of textile vascular prostheses

B. Voorhees, J. A. Jaretzki, and A. H. Blakemore, Ann. Surg., 135, 332 (1952).

E. Michael, Artif. Organs, 32, 661 (2008).

C. D. Etz, T. Homann, D. Silovitz, C. A. Bodian, M. Luehr, G. D. Luozzo, K. A. Plestis, and R. B. Griepp, Ann. Thorac. Surg., 84, 1206 (2007).

S. Ben Abdessalem, B. Durand, S. Akesbi, N. Chakfe, and J.-G. Kretz, J. Text. Inst., 96, 117 (2005).

N. Blanchemain, T. Laurent, F. Chai, C. Neut, S. Haulon, V. Krump-Konvalinkova, M. Morcellet, B. Martel, C. J. Kirkpatrick, and H. F. Hildebrand, Acta Biomater., 4, 1725 (2008).

A. Cardon, N. Chakfe, F. Thaveau, E. Gagnon, O. Hartung, S. Aillet, Y. Kerdiles, Y.-M. Dion, J.-G. Kretz, and C.-J. Doillon, Ann. Vasc. Surg., 14, 543 (2000).

N. Yasuharu, Y. Yoshihisa, O. Takafumi, T. Yasuko, and T. Eiji, Jap. J. Artif. Organs, 28, 547 (1999).

M. W. King, Z. Zhang, and R. Guidoin, J. Text. Appar. Technol. Manag., 1, 1 (2001).

“Medical”, Technical Usage Textiles A., 40, 36 (2001).

K. Berger and L. R. Sauvage, Ann. Surg., 193, 477 (1981).

N. Lheureux, L. Germain, R. Labbe, and F. Auger, J. Vasc. Surg., 17, 499 (1993).

L. E. Niklason, Science, 286, 1493 (1999).

R. Smeets, A. Bozkurt, M. S. Harwoko, U. Wiesemann, C. Apel, F. Budillon, T. Gries, D. Riediger, and M. Wöltie, Technical Textiles, 3, 27 (2005).

H. Van Damme, M. Deprez, E. Creemers, and R. Limet, Acta Chir. Belg., 105, 249 (2005).

S. Ben Abdessalem, I. Zbali, N. Litim, and S. Mokhtar, Iranian Polym. J., 18, 15 (2009).

R. Guidoin, M. King, X. Deng, E. Paris, and Y. Douville, Rev. Eur. Biomed. Tech., 4, 13 (1982).

M. Feldstein and B. Pourdeyhimi, J. Mater. Sci. Lett., 9, 1061 (1990).

B. Pourdeyhimi and C. Text, J. Biomater. Appl., 2, 163 (1987).

B. Pourdeyhimi, Text. Prog., 15, 1 (1986).

M. S. Ellison, P. E. Lopes, and W. T. Pennington, J. Engineered Fibers Fabrics, 3, 10 (2008).

S. K. Mukhopadhyay, E. M. O. Bebbington, and P. W. Foster, Text. Res. J., 62, 403 (1992).

M. Azaiez, I. Zbali, and S. Ben Abdessalem, Iranica J. Energy & Environ., 2, 79 (2011).

H. Khlif, S. Ben Abdessalem, S. Dhouib, and F. Sakli, Trends Applied Sci. Res., ISSN 1819-3579 / DOI 10.3923/tasr.2011, 2011.

H. Khlif and S. Ben Abdessalem, Res. J. Text. Appar., 15, 2011.

BASF, “Dyeing and Finishing of Polyester Fibers”, pp.138–141, BASF Editions, Germany, 1990.

H. M. Heuvel and R. Huisman, J. Appl. Polym. Sci., 22, 2229 (1978).

M. Sotton, A. M. Arniaud, and C. Rabourdin, ITF Scientific Bulletin, 7, 265 (1978).

V. B. Gupta and S. Kumar, J. Appl. Polym. Sci., 26, 1865 (1981).

J. Radhakrishnan, U. P. Kanitkar, and V. B. Gupta, J. Society Dyers & Colourists, 113, 59 (1997).

P. L. Davies, U. Gather, M. Meise, D. Mergel, and T. Mildenberger, Ann. Appl. Stat., 2, 861 (2008).

V. B. Gupta, J. Text. Inst., 86, 299 (1995).

R. Huisman and H. M. Heuvel, J. Appl. Polym. Sci., 37, 595 (1989).

I. Zbali, Ph. D. Dissertation, University of Haute Alsace, France, 2004.

C. Le Clerc, Ph. D. Dissertation, University of Paris Mines, France, 2006.

F. Dieval, D. Mathieu, and B. Durand, Text. Res. J., 73, 200 (2003).

F. Dieval, D. Mathieu, and B. Durand, J. Text. Inst., 95, 131 (2004).

G. Vassilatos, “Dynamics, Structure Development and Fiber Properties in High-Speed Spinning of Polyethylene Terephthalate” in “High Speed Fiber Spinning” (A. Ziabicki and H. Kawai Eds.), pp.421–423, Wiley-Interscience, New York, 1985.

J. Gacen, J. M. Canal, A. Naik, and F. Bernal, ITF Scientific Bulletin, 14, 35 (1985).

K. V. Datye and A. A. Vaidya, “Chemical Processing of Synthetic Fibers and Blends”, Wiley-Interscience, New York, 1984.

R. Huisman and H. M. Heuvel, J. Appl. Polym. Sci., 22, 943 (1978).

M. P. W Wilson, Polymer, 15, 277 (1974).

P. Bouriot, J. Jacquemart, and M. Sotton, ITF Scientific Bulletin, 6, 9 (1977).