Influence of attenuation on acoustic emission signals in carbon fiber reinforced polymer panels

Gorman, 1991, Plate wave acoustic emission, J. Acoust. Soc. Am., 90, 358, 10.1121/1.401258

Eaton, 2011, Characterisation of damage in composite structures using acoustic emission, J. Phys.: Conf. Ser., 012086

Oskouei, 2009, Wavelet-based acoustic emission characterization of damage mechanism in composite materials under mode I delamination at different interfaces, Exp. Polym Lett., 3, 804, 10.3144/expresspolymlett.2009.99

Loutas, 2009, Health monitoring of carbon/carbon, woven reinforced composites. Damage assessment by using advanced signal processing techniques. Part I: acoustic emission monitoring and damage mechanisms evolution, Compos. Sci. Technol., 69, 265, 10.1016/j.compscitech.2008.07.020

Arumugam, 2011, Acoustic emission characterization of failure modes in GFRP laminates under mode I delamination, J. Nondestr. Eval., 30, 213, 10.1007/s10921-011-0109-5

Wang, 2007, Group velocity and characteristic wave curves of Lamb waves in composites: modeling and experiments, Compos. Sci. Technol., 67, 1370, 10.1016/j.compscitech.2006.09.023

Scholey, 2010, Quantitative experimental measurements of matrix cracking and delamination using acoustic emission, Compos. A Appl. Sci. Manuf., 41, 612, 10.1016/j.compositesa.2010.01.008

Gresil, 2013, Guided wave propagation in carbon composite laminate using piezoelectric wafer active sensors

Ni, 2002, Wavelet transform of acoustic emission signals in failure of model composites, Eng. Fract. Mech., 69, 717, 10.1016/S0013-7944(01)00105-9

Ramirez-Jimenez, 2004, Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event, Compos. Sci. Technol., 64, 1819, 10.1016/j.compscitech.2004.01.008

Haselbach, 2003, Acoustic emission of debonding between fibre and matrix to evaluate local adhesion, Compos. Sci. Technol., 63, 2155, 10.1016/S0266-3538(03)00193-3

Ramadas, 2011, Modelling of attenuation of Lamb waves using Rayleigh damping: numerical and experimental studies, Compos. Struct., 93, 2020, 10.1016/j.compstruct.2011.02.021

Pandya, 2012, Stress wave attenuation in composites during ballistic impact, Polym. Test., 31, 261, 10.1016/j.polymertesting.2011.11.006

Wandowski, 2011, Guided wave-based detection of delamination and matrix cracking in composite laminates, Proc. Inst. Mech. Eng. Part C-J. Mech. Eng. Sci., 225, 123, 10.1243/09544062JMES1907

Kerber, 2010, Attenuation analysis of lamb waves using the Chirplet transform, Eurasip J. Adv. Signal Proc., 10.1155/2010/375171

Sun, 2009, Numerical simulation of laser-generated Lamb waves in viscoelastic materials by finite element method, J. Appl. Phys., 106, 10.1063/1.3238247

Drinkwater, 2003, The measurement of A(0) and S-0 Lamb wave attenuation to determine the normal and shear stiffnesses of a compressively loaded interface, J. Acoust. Soc. Am., 113, 3161, 10.1121/1.1568754

Aggelis, 2012, Effect of plate wave dispersion on the acoustic emission parameters in metals, Comput. Struct., 98–99, 17, 10.1016/j.compstruc.2012.01.014

Maillet, 2014, Real-time evaluation of energy attenuation: a novel approach to acoustic emission analysis for damage monitoring of ceramic matrix composites, J. Eur. Ceram. Soc., 34, 1673, 10.1016/j.jeurceramsoc.2013.12.041

P. Hora, O. Červená, Acoustic emission source modeling, 2010.

Giordano, 1999, Acoustic emission wave propagation in a viscoelastic plate, Compos. Sci. Technol., 59, 1735, 10.1016/S0266-3538(99)00035-4