Stress wave attenuation in composites during ballistic impact
Tóm tắt
Từ khóa
Tài liệu tham khảo
Meyers, 1994
Gellert, 2000, A study of the effect of target thickness on the ballistic perforation of glass-fibre-reinforced plastic composites, International Journal of Impact Engineering, 24, 445, 10.1016/S0734-743X(99)00175-X
Caprino, 2007, Ballistic impact behaviour of stitched graphite/epoxy laminates, Composites Science and Technology, 67, 325, 10.1016/j.compscitech.2006.04.015
Larsson, 1997, Damage tolerance of a stitched carbon/epoxy laminate, Composites: Part A, 28, 923, 10.1016/S1359-835X(97)00063-8
Mines, 1999, High velocity perforation behaviour of polymer composite laminates, International Journal of Impact Engineering, 22, 561, 10.1016/S0734-743X(99)00019-6
Mouritz, 2001, Ballistic impact and explosive blast resistance of stitched composites, Composites: Part B, 32, 431, 10.1016/S1359-8368(01)00015-4
Tarim, 2002, Ballistic impact performance of composite structures, Composite Structures, 56, 13, 10.1016/S0263-8223(01)00177-5
Hosur, 2004, Performance of stitched/unstitched woven carbon/epoxy composites under high velocity impact loading, Composite Structures, 64, 455, 10.1016/j.compstruct.2003.09.046
Cork, 2007, The ballistic performance of narrow fabrics, International Journal of Impact Engineering, 34, 495, 10.1016/j.ijimpeng.2005.10.006
Cantwell, 1989, The influence of varying projectile mass on the impact response of CFRP, Composite Structures, 13, 101, 10.1016/0263-8223(89)90048-2
Cantwell, 1989, Comparison of low and high velocity impact response of CFRP, Composites, 20, 545, 10.1016/0010-4361(89)90913-0
Lee, 1993, Dynamic penetration of graphite/epoxy laminates impacted by a blunt-ended projectile, Composites Science and Technology, 49, 369, 10.1016/0266-3538(93)90069-S
Cheng, 2003, High velocity impact of thick composites, International Journal of Impact Engineering, 29, 167, 10.1016/j.ijimpeng.2003.09.015
Nunes, 2004, Evaluation of the damaged area of glass-fiber-reinforced epoxy-matrix composite materials submitted to ballistic impacts, Composites Science and Technology, 64, 945, 10.1016/S0266-3538(03)00105-2
Boccaccini, 2005, Fracture behaviour of mullite fibre reinforced–mullite matrix composites under quasi-static and ballistic impact loading, Composites Science and Technology, 65, 325, 10.1016/j.compscitech.2004.08.002
DeLuca, 1998, Ballistic impact damage of S2-glass-reinforced plastic structural armor, Composites Science and Technology, 58, 1453, 10.1016/S0266-3538(98)00029-3
da Silva, 2004, Determination of the post-ballistic impact mechanical behavior of a ±45° glass–fabric composite, Polymer Testing, 23, 599, 10.1016/j.polymertesting.2003.10.008
Colakoglu, 2007, Experimental and numerical investigations on the ballistic performance of polymer matrix composites used in armor design, Applied Composite Materials, 14, 47, 10.1007/s10443-006-9030-y
Gower, 2008, Ballistic impact response of laminated composite panels, International Journal of Impact Engineering, 35, 1000, 10.1016/j.ijimpeng.2007.07.007
Lopez-Puente, 2008, Experimental and numerical analysis of normal and oblique ballistic impacts on thin carbon/epoxy woven laminates, Composites: Part A, 39, 374, 10.1016/j.compositesa.2007.10.004
Sabet, 2009, Experimental study of sharp-tipped projectile perforation of GFRP plates containing sand filler under high velocity impact and quasi-static loadings, Polymer Composites, 30, 1497, 10.1002/pc.20720
Sevkat, 2009, A combined experimental and numerical approach to study ballistic impact response of S2-glass fiber/toughened epoxy composite beams, Composites Science and Technology, 69, 965, 10.1016/j.compscitech.2009.01.001
Sheikh, 2009, Behaviour of multiple composite plates subjected to ballistic impact, Composites Science and Technology, 69, 704, 10.1016/j.compscitech.2008.03.022
Zhao, 2010, Experimental study on impact resistance properties of T300/epoxy composite laminates, Journal of Composite Materials, 44, 857, 10.1177/0021998309346391
Hirai, 1998, Impact response of woven glass-fabric composites. I. Effect of fibre surface treatment, Composites Science and Technology, 58, 91, 10.1016/S0266-3538(97)00111-5