Implementation of ‘chaotic’ advection for viscous fluids in heat exchanger/reactors

Anxionnaz, 2008, Heat exchanger/reactors (HEX reactors): concepts technologies: state-of-the-art, Chem. Eng. Proc., 47, 2029, 10.1016/j.cep.2008.06.012

Anxionnaz, 2010, Transposition of an exothermic reaction from a batch reactor to an intensified one, Heat Transfer Eng., 31, 788, 10.1080/01457630903501153

Anxionnaz-Minvielle, 2013, Influence of the meandering channel geometry on the thermo-hydraulic performances of an intensified heat exchanger/reactor, Chem. Eng. Process. Process Intensif., 73, 67, 10.1016/j.cep.2013.06.012

Theron, 2014, Characterization of the performances of an innovative heat-exchanger/reactor, Chem. Eng. Process. Process Intensif., 82, 30, 10.1016/j.cep.2014.04.005

Moreau, 2015, Pressure drop and axial dispersion in industrial millistructured heat exchange reactors, Chem. Eng. Process. Process Intensif., 95, 54, 10.1016/j.cep.2015.05.009

Ghanem, 2014, Mixing performances of swirl flow and corrugated channel reactors, Chem. Eng. Res. Des., 92, 2213, 10.1016/j.cherd.2014.01.014

Habchi, 2012, Enhancing heat transfer in vortex generator-type multifunctional heat exchangers, App. Thermal Eng., 38, 14, 10.1016/j.applthermaleng.2012.01.020

Carrière, 2007, On a three-dimensional implementation of the Baker’s transformation, Phys. Fluids, 19, 118110, 10.1063/1.2804959

Raynal, 2015, The distribution of time of flight in three dimensional stationary chaotic advection, Phys. Fluids, 27, 10.1063/1.4918750

Gray, 1999, Novel interconnection technologies for integrated microfluidic systems, Sens. Actuators A Phys., 77, 57, 10.1016/S0924-4247(99)00185-5

Chen, 2004, Topologic mixing on a microfluidic chip, Appl. Phys. Lett., 84, 2193, 10.1063/1.1686895

Branebjerg, 1996, Fast mixing by lamination, Proc. IEEE Micro Electro Mech. Syst. (MEMS), 441

Creyssels, 2015, Laminar heat transfer in the MLLM static mixer, Int. J. Heat Mass Transfer, 81, 774, 10.1016/j.ijheatmasstransfer.2014.10.064

A. Ghanem, T. Lemenand, D. Della Valle, H. Peerhossaini, Optimized chaotic heat exchanger configurations for process industry: a numerical study, Proc. ASME Fluids Eng. Div. Summer Meet. (2013), Incline Village, USA.

Mokrani, 1997, The effects of chaotic advection on heat transfer, Int. J. Heat Mass Transfer, 40, 3089, 10.1016/S0017-9310(96)00361-4

Chagny, 2000, Chaotic heat transfer for heat exchanger design and comparison with a regular regime for a large range of Reynolds numbers, Appl. Therm. Eng., 20, 1615, 10.1016/S1359-4311(99)00084-8

Kumar, 2006, Pressure drop and heat transfer study in tube-in-tube helical heat exchanger, Chem. Eng. Sci., 61, 4403, 10.1016/j.ces.2006.01.039

A. Ghanem, T. Lemenand, D. Della Valle, H. Peerhossaini, Transport phenomena in passively manipulated chaotic flows: Split-and-recombine reactors, Proc. ASME Fluids Eng. Div. Summer Meet. (2013), Incline Village, USA.

Prat, 2005, Performance evaluation of a novel concept “open plate reactor” applied to highly exothermic reactions, Chem. Eng. Technol., 28, 1028, 10.1002/ceat.200500120

Grau, 2000, Batch and semibatch reactor performance for an exothermic reaction, Chem. Eng. Proc., 39, 141, 10.1016/S0255-2701(99)00015-X

Benkouider, 2009, Fault detection in semi-batch reactor using the EKF and statistical method, J. Loss Prev. Process Ind., 22, 153, 10.1016/j.jlp.2008.11.006

Vernieres-Hassimi, 2008, Experimental and theoretical steady state maximum temperature localization along an exothermic tubular reactor, Open Chem. Eng. J., 2, 57, 10.2174/1874123100802010057

Benaissa, 2008, Dynamic behaviour of a continuous heat exchanger/reactor after flow failure, Int. J., Chem. React. Eng., 6

Grau, 2000, Batch and semibatch reactor performance for an exothermic reaction, Chem. Eng. Proc., 39, 141, 10.1016/S0255-2701(99)00015-X