Enhancing heat transfer in vortex generator-type multifunctional heat exchangers

Jacobi, 1995, Heat transfer surface enhancement through the use of longitudinal vortices: a review of recent progress, Experimental Thermal and Fluid Science, 11, 295, 10.1016/0894-1777(95)00066-U

Ajakh, 1999, Influence of forced perturbations in the stagnation region on Görtler instability, AIAA Journal, 37, 1572, 10.2514/2.657

Habchi, 2009, Influence of viscosity ratio on droplets formation in a chaotic advection flow, International Journal of Chemical Reactor Engineering, 7, A50, 10.2202/1542-6580.2075

Hwang, 2001, Heat transfer and flow structures in axisymmetric impinging jet controlled by vortex pairing, International Journal of Heat and Fluid Flow, 22, 293, 10.1016/S0142-727X(01)00091-1

Fiebig, 1998, Vortices, generators and heat transfer, Chemical Engineering Research and Design, 76, 108, 10.1205/026387698524686

Ferrouillat, 2006, Open loop thermal control of exothermal chemical reactions in multifunctional heat exchangers, International Journal of Heat and Mass Transfer, 49, 2479, 10.1016/j.ijheatmasstransfer.2006.01.023

Chang, 2009, Numerical study of the relationship between heat transfer enhancement and absolute vorticity flux along main flow direction in a channel formed by a flat tube bank fin with vortex generators, International Journal of Heat and Mass Transfer, 52, 1794, 10.1016/j.ijheatmasstransfer.2008.09.029

C. Habchi, T. Lemenand, D. Della Valle, H. Peerhossaini, On the Correlation Between Vorticity Strength and Convective Heat Transfer, vol. 2, IHTC 14, ASME, 2010, pp. 377–382.

Chemineer-Kenics, 1998

Phillips, 1997, Intensification of batch chemical processes by using integrated chemical reactor-heat exchangers, Applied Thermal Engineering, 17, 809, 10.1016/S1359-4311(96)00061-0

Lemenand, 2010, Turbulent direct-contact heat transfer between two immiscible fluids, International Journal of Thermal Sciences, 49, 1886, 10.1016/j.ijthermalsci.2010.05.014

Habchi, 2010, Alternating mixing tabs in multifunctional heat exchanger-reactor, Chemical Engineering and Processing: Process Intensification, 49, 653, 10.1016/j.cep.2009.07.003

Dong, 2004, Flow past a trapezoidal tab, Journal of Fluid Mechanics, 510, 219, 10.1017/S0022112004009486

Thakur, 2003, Static mixers in the process industries: a review, Chemical Engineering Research and Design, 81, 787, 10.1205/026387603322302968

Anxionnaz, 2008, Heat exchanger/reactors (hex reactors): concepts, technologies: state-of-the-art, Chemical Engineering and Processing: Process Intensification, 47, 2029, 10.1016/j.cep.2008.06.012

Habchi, 2011, Entropy production and field synergy principle in turbulent vortical flows, International Journal of Thermal Sciences, 50, 2365, 10.1016/j.ijthermalsci.2011.07.012

Yakhot, 1986, Renormalization group analysis of turbulence:(i) basic theory, Journal of Scientific Computing, 1, 3, 10.1007/BF01061452

Versteeg, 1995

Launder, 1974, The numerical computation of turbulent flows, Computer Methods in Applied Mechanics and Engineering, 3, 269, 10.1016/0045-7825(74)90029-2

Choudhury, 1993

Warming, 1976, Upwind second-order difference schemes and applications in aerodynamic flows, AIAA Journal, 14, 1241, 10.2514/3.61457

Patankar, 1980

Wolfshtein, 1969, The velocity and temperature distribution in one-dimensional flow with turbulence augmentation and pressure gradient, International Journal of Heat and Mass Transfer, 12, 301, 10.1016/0017-9310(69)90012-X

Chen, 1988, Near-wall turbulence models for complex flows including separation, AIAA Journal, 26, 641, 10.2514/3.9948

Mohand Kaci, 2010, Flow structure and heat transfer induced by embedded vorticity, International Journal of Heat and Mass Transfer, 53, 3575, 10.1016/j.ijheatmasstransfer.2010.04.029

Hinze, 1959

Habchi, 2010, Turbulence behavior of artificially generated vorticity, Journal of Turbulence, 11, 1

Habchi, 2010, Turbulent mixing and residence time distribution in novel multifunctional heat exchangers-reactors, Chemical Engineering and Processing: Process Intensification, 49, 1066, 10.1016/j.cep.2010.08.007

Mokrani, 2009, Experimental study of the influence of the rows of vortex generators on turbulence structure in a tube, Chemical Engineering and Processing: Process Intensification, 48, 659, 10.1016/j.cep.2008.07.009

Promvonge, 2008, Thermal performance assessment of turbulent channel flows over different shaped ribs, International Communications in Heat and Mass Transfer, 35, 1327, 10.1016/j.icheatmasstransfer.2008.07.016

Rahimi, 2009, Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts, Chemical Engineering and Processing: Process Intensification, 48, 762, 10.1016/j.cep.2008.09.007

Kakac, 1987

Gnielinski, 1976, New equations for heat and mass transfer in turbulent pipe and channel flow, International Chemical Engineering, 16, 359

Thianpong, 2009, Thermal characterization of turbulent flow in a channel with isosceles triangular ribs, International Communications in Heat and Mass Transfer, 36, 712, 10.1016/j.icheatmasstransfer.2009.03.027

Eiamsa-Ard, 2010, Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem, International Communications in Heat and Mass Transfer, 37, 39, 10.1016/j.icheatmasstransfer.2009.08.010

Chiu, 2009, 3d numerical and experimental analysis for thermal-hydraulic characteristics of air flow inside a circular tube with different tube inserts, Applied Thermal Engineering, 29, 250, 10.1016/j.applthermaleng.2008.02.030

Eiamsa-Ard, 2006, Experimental investigation of heat transfer and friction characteristics in a circular tube fitted with v-nozzle turbulators, International Communications in Heat and Mass Transfer, 33, 591, 10.1016/j.icheatmasstransfer.2006.02.022

Li, 1996, Hydrodynamics and heat transfer of rheologically complex fluids in a sulzer smx static mixer, Chemical Engineering Science, 51, 1947, 10.1016/0009-2509(96)00052-8

Joshi, 1995, The Kenics static mixer: new data and proposed correlations, The Chemical Engineering Journal and the Biochemical Engineering Journal, 59, 265, 10.1016/0923-0467(94)02948-2

Baldyga, 1999

Habchi, 2011, A new adaptive procedure for using chemical probes to characterize mixing, Chemical Engineering Science, 66, 3540, 10.1016/j.ces.2011.04.019