Pleiades Publishing Ltd

Công bố khoa học tiêu biểu

* Dữ liệu chỉ mang tính chất tham khảo

Sắp xếp:  
Thermal processes in methacrylamide after high-pressure plastic deformation
Pleiades Publishing Ltd - Tập 85 - Trang 437-441 - 2012
V. A. Zhorin, M. R. Kiselev
The effect of high pressure (0.5–2.0 GPa) on the methacrylamide polymerization under the conditions of plastic deformation performed on high-pressure anvil-type devices was studied. Thermal processes in samples subjected to deformation at different pressures and the effect of UV irradiation on the enthalpies of the monomer polymerization in a melt and of the high-temperature endothermic process in...... hiện toàn bộ
Degradation of 2-nitrophenol from petrochemical wastewater by ozone
Pleiades Publishing Ltd - Tập 88 - Trang 2038-2043 - 2016
Aref Shokri
In this project, O3 process was used for degradation and mineralization of 50 mg L–1 of 2-nitrophenol (2NP) in a semi batch reactor under variable dosage of ozone and pH. Ozonation was performed at the pH of 3, 5, 7, and 9. After 20 min of treatment, the amount of degradation was 99.8% at pH 9 compared to 90, 82.7, and 70.5% at pH 7, 5, and 3, respectively. Results revealed that the degradation ef...... hiện toàn bộ
A study of electrodes based on fluorinated fullerene black
Pleiades Publishing Ltd - Tập 85 - Trang 1695-1698 - 2012
A. M. Egorov, I. A. Putsylov, S. E. Smirnov, S. A. Fateev
Original method for fabrication of cathodes based on fluorinated fullerene black for primary lithium power cells was developed. The method includes preliminary ultrasonic treatment of the active mass.
Method for Measuring the Combustion Heat of Natural Gas with Isothermal Calorimeter
Pleiades Publishing Ltd - Tập 74 - Trang 1539-1545 - 2001
Yu. I. Aleksandrov, V. I. Belyakov, V. P. Varganov, S. Sarge
Factors that are to be taken into account in developing a calorimetric technique are considered. The possible deviations of temperatures at the inlet and outlet of gases in the calorimeter from the nominal values are evaluated and an example of such estimate is given for the case of methane burning in batch and continuous operation modes. The necessity for taking into account the humidity of gases...... hiện toàn bộ
Interaction of organic acids with silicates in the course of joint mechanical activation
Pleiades Publishing Ltd - Tập 90 - Trang 334-341 - 2017
I. A. Vorsina, T. F. Grigor’eva, E. T. Devyatkina, S. V. Vosmerikov, T. A. Udalova, N. Z. Lyakhov
IR spectroscopy, X-ray phase analysis, and high-resolution electron microscopy were used to examine the nature of the interaction of organic acids with silicates in their joint mechanical activation for the example of succinic acid. It was found that mechanocomposites with chemically bound components are formed in the course of activation of acid–layered silicate mixtures. It was shown that in the...... hiện toàn bộ
Thermochemical Reactions of Polyacrylonitrile with Fullerene C6 0
Pleiades Publishing Ltd - Tập 76 - Trang 452-456 - 2003
Yu. N. Sazanov, M. V. Mokeev, A. V. Novoselova, V. L. Ugolkov, G. N. Fedorova, A. V. Gribanov, V. N. Zgonnik
Reactions occuring in mixtures of polyacrylonitrile with fullerene C6 0 at 20-1000°C were studied by thermal analysis. The greatest thermal effects were observed in diffusion-controlled reactions of anionic polyacrylonitrile with fullerene. Carbonizate is formed with the yield of about 60%, which is of practical interest.
Cycloalkyldecalins as components of jet fuels
Pleiades Publishing Ltd - Tập 83 - Trang 918-920 - 2010
N. F. Akhmedov, S. E. Mamedov, R. A. Akhmedova
The possibility of obtaining cycloalkyldecalins by the alkylation of 1–and 2–methylnaphthalenes by cycloolefins with subsequent hydrogenation of methylcycloalkylnaphthalenes was studied. Physicochemical parameters of reaction products were determined, and their structure was defined on the basis of IR and NMR spectra.
Investigation of the process of ammonium nitrate phosphatization with ammophos
Pleiades Publishing Ltd - Tập 85 - Trang 479-484 - 2012
V. V. Pak, A. V. Ten, N. N. Pirmanov, Sh. S. Namazov, B. M. Beglov
Results of production of modified nitrogen phosphorus fertilizer by introducing into the melt of ammonium nitrate of ammophos, produced at “Ammofos-Maxam” OJSC, Almalyk, are presented.
Frost-Resistant Polyurethane-Urea Materials Based on Oligoethers
Pleiades Publishing Ltd - Tập 91 - Trang 1451-1459 - 2018
V. Yu. Senichev, M. A. Makarova, A. V. Savchuk
Physicomechanical behavior of cross-linked segmented polyester urethane ureas with poly(tetramethylene oxide) segments of varied molecular mass, plasticized with di-(2-ethylhexyl) cebacate, was considered. Data on how the structure of flexible and rigid segments affects the physicomechanical properties of the plasticized material, including those at low temperatures, are presented. Ways were deter...... hiện toàn bộ
Tổng số: 5,371   
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 10