Micromachines
SCOPUS (2010-2025)SCIE-ISI
2072-666X
Thụy Sĩ
Cơ quản chủ quản: MDPI , Multidisciplinary Digital Publishing Institute (MDPI)
Lĩnh vực:
Control and Systems EngineeringElectrical and Electronic EngineeringMechanical Engineering
Phân tích ảnh hưởng
Các bài báo tiêu biểu
Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production
Tập 7 Số 12 - Trang 225
Using polymer materials to fabricate microfluidic devices provides simple, cost
effective, and disposal advantages for both lab-on-a-chip (LOC) devices and
micro total analysis systems (μTAS). Polydimethylsiloxane (PDMS) elastomer and
thermoplastics are the two major polymer materials used in microfluidics. The
fabrication of PDMS and thermoplastic microfluidic device can be categorized as
front-e...
Flexible Microfluidics: Fundamentals, Recent Developments, and Applications
Tập 10 Số 12 - Trang 830
Miniaturization has been the driving force of scientific and technological
advances over recent decades. Recently, flexibility has gained significant
interest, particularly in miniaturization approaches for biomedical devices,
wearable sensing technologies, and drug delivery. Flexible microfluidics is an
emerging area that impacts upon a range of research areas including chemistry,
electronics, bi...
Recent Advances in Applications of Droplet Microfluidics
Tập 6 Số 9 - Trang 1249-1271
Droplet-based microfluidics is a colloidal and interfacial system that has
rapidly progressed in the past decade because of the advantages of low
fabrication costs, small sample volumes, reduced analysis durations,
high-throughput analysis with exceptional sensitivity, enhanced operational
flexibility, and facile automation. This technology has emerged as a new tool
for many recently used applicat...
Numerical Computation for Gyrotactic Microorganisms in MHD Radiative Eyring–Powell Nanomaterial Flow by a Static/Moving Wedge with Darcy–Forchheimer Relation
Tập 13 Số 10 - Trang 1768
The intention of this study is to carry out a numerical investigation of
time-dependent magneto-hydro-dynamics (MHD) Eyring–Powell liquid by taking a
moving/static wedge with Darcy-Forchheimer relation. Thermal radiation was taken
into account for upcoming solar radiation, and the idea of bioconvection is also
considered for regulating the unsystematic exertion of floating nanoparticles.
The novel...
Construction of Z-Scheme g-C3N4/CNT/Bi2Fe4O9 Composites with Improved Simulated-Sunlight Photocatalytic Activity for the Dye Degradation
Tập 9 Số 12 - Trang 613
In this work, ternary all-solid-state Z-scheme g-C3N4/carbon nanotubes/Bi2Fe4O9
(g-C3N4/CNT/BFO) composites with enhanced photocatalytic activity were prepared
by a hydrothermal method. The morphology observation shows that ternary
heterojunctions are formed in the g-C3N4/CNT/BFO composites. The photocatalytic
activity of the samples for the degradation of acid orange 7 was investigated
under simu...
Approaches and Challenges of Engineering Implantable Microelectromechanical Systems (MEMS) Drug Delivery Systems for in Vitro and in Vivo Applications
Tập 3 Số 4 - Trang 615-631
Despite the advancements made in drug delivery systems over the years, many
challenges remain in drug delivery systems for treating chronic diseases at the
personalized medicine level. The current urgent need is to develop novel
strategies for targeted therapy of chronic diseases. Due to their unique
properties, microelectromechanical systems (MEMS) technology has been recently
engineered as impla...
Facile Preparation of CNT/Ag2S Nanocomposites with Improved Visible and NIR Light Photocatalytic Degradation Activity and Their Catalytic Mechanism
Tập 10 Số 8 - Trang 503
In this work, a series of carbon nanotubes (CNT)/Ag2S hybrid nanocomposites were
successfully prepared by a facile precipitation method. Transmission electron
microscope (TEM) observation indicates that Ag2S nanoparticles with an average
particle size of ~25 nm are uniformly anchored on the surface of CNT. The
photocatalytic activities of the CNT/Ag2S nanocomposites were investigated
toward the de...
Fabrication of ZnO@Ag@Ag3PO4 Ternary Heterojunction: Superhydrophilic Properties, Antireflection and Photocatalytic Properties
Tập 11 Số 3 - Trang 309
A ZnO seed layer was formed on the fluorine-doped tin oxide substrate by
magnetron sputtering, and then a ZnO nanorod was grown on the ZnO seed layer by
a hydrothermal method. Next, we prepared a single-crystal Ag seed layer by
magnetron sputtering to form a ZnO@Ag composite heterostructure. Finally, Ag3PO4
crystals were grown on the Ag seed layer by a stepwise deposition method to
obtain a ZnO@Ag...
Fabriction of ZnO Nanorods with Strong UV Absorption and Different Hydrophobicity on Foamed Nickel under Different Hydrothermal Conditions
Tập 10 Số 3 - Trang 164
ZnO nanorods have been grown on the surface of foamed nickel by a two-step
method. Firstly, a layer of ZnO seed is sputtered on the surface of the foamed
nickel by magnetron sputtering, and then the hydrothermal method is used to grow
ZnO nanorods at different conditions (solution concentration, reaction time and
reaction temperature). The results show that the morphology of ZnO nanorods is
closel...
Magnetic Particles: Their Applications from Sample Preparations to Biosensing Platforms
Tập 11 Số 3 - Trang 302
The growing interest in magnetic materials as a universal tool has been shown by
an increasing number of scientific publications regarding magnetic materials and
its various applications. Substantial progress has been recently made on the
synthesis of magnetic iron oxide particles in terms of size, chemical
composition, and surface chemistry. In addition, surface layers of polymers,
silica, biomol...