Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production

Manz, 1990, Miniaturized total chemical-analysis systems—A novel concept for chemical sensing, Sens. Actuators B Chem., 1, 244, 10.1016/0925-4005(90)80209-I

Becker, 2002, Polymer microfluidic devices, Talanta, 56, 267, 10.1016/S0039-9140(01)00594-X

Tan, 2014, The microfluidic jukebox, Sci. Rep., 4, 4787, 10.1038/srep04787

Chong, 2016, Active droplet generation in microfluidics, Lab Chip, 16, 35, 10.1039/C5LC01012H

Araci, 2012, Microfluidic very large scale integration (mvlsi) with integrated micromechanical valves, Lab Chip, 12, 2803, 10.1039/c2lc40258k

McDonald, 2002, Poly(dimethylsiloxane) as a material for fabricating microfluidic devices, Acc. Chem. Res., 35, 491, 10.1021/ar010110q

Sia, 2003, Microfluidic devices fabricated in poly(dimethylsiloxane) for biological studies, Electrophoresis, 24, 3563, 10.1002/elps.200305584

Alrifaiy, 2012, Polymer-based microfluidic devices for pharmacy, biology and tissue engineering, Polymers, 4, 1349, 10.3390/polym4031349

Janse, 2012, Comparison of biocompatibility and adsorption properties of different plastics for advanced microfluidic cell and tissue culture models, Anal. Chem., 84, 3938, 10.1021/ac300771z

Mehling, 2014, Microfluidic cell culture, Curr. Opin. Biotech., 25, 95, 10.1016/j.copbio.2013.10.005

Wu, 2010, Microfluidic cell culture systems for drug research, Lab Chip, 10, 939, 10.1039/b921695b

Berthier, 2012, Engineers are from pdms-land, biologists are from polystyrenia, Lab Chip, 12, 1224, 10.1039/c2lc20982a

Halldorsson, 2015, Advantages and challenges of microfluidic cell culture in polydimethylsiloxane devices, Biosens. Bioelectron., 63, 218, 10.1016/j.bios.2014.07.029

Liu, 2011, Thermoplastic microfluidic devices and their applications in protein and DNA analysis, Analyst, 136, 1288, 10.1039/c0an00969e

Becker, 2013, Selecting and designing with the right thermoplastic polymer for your microfluidic chip: A close look into cyclo-olefin polymer, Proc. SPIE, 8615, 86150F, 10.1117/12.2004041

Bhattacharyya, 2006, Thermoplastic microfluidic device for on-chip purification of nucleic acids for disposable diagnostics, Anal. Chem., 78, 788, 10.1021/ac051449j

Liu, 2009, Polymer microchips integrating solid-phase extraction and high-performance liquid chromatography using reversed-phase polymethacrylate monoliths, Anal. Chem., 81, 2545, 10.1021/ac802359e

Friend, 2010, Fabrication of microfluidic devices using polydimethylsiloxane, Biomicrofluidics, 4, 026502, 10.1063/1.3259624

Xi, 2016, AC electric field induced droplet deformation in a microfluidic T-junction, Lab Chip, 16, 2982, 10.1039/C6LC00448B

Xia, 1998, Soft lithography, Angew. Chem. Int. Ed. Engl., 37, 550, 10.1002/(SICI)1521-3773(19980316)37:5<550::AID-ANIE550>3.0.CO;2-G

Eddings, 2008, Determining the optimal PDMS-PDMS bonding technique for microfluidic devices, J. Micromech. Microeng., 18, 067001, 10.1088/0960-1317/18/6/067001

Unger, 2000, Monolithic microfabricated valves and pumps by multilayer soft lithography, Science, 288, 113, 10.1126/science.288.5463.113

Chong, 2015, Acoustofluidic control of bubble size in microfluidic flow-focusing configuration, Lab Chip, 15, 996, 10.1039/C4LC01139B

Tan, 2010, Oxygen plasma treatment for reducing hydrophobicity of a sealed polydimethylsiloxane microchannel, Biomicrofluidics, 4, 032204, 10.1063/1.3466882

Guckenberger, 2015, Micromilling: A method for ultra-rapid prototyping of plastic microfluidic devices, Lab Chip, 15, 2364, 10.1039/C5LC00234F

Rahmanian, 2013, Pen microfluidics: Rapid desktop manufacturing of sealed thermoplastic microchannels, Lab Chip, 13, 1102, 10.1039/c2lc41057e

Okagbare, 2010, Fabrication of a cyclic olefin copolymer planar waveguide embedded in a multi-channel poly(methyl methacrylate) fluidic chip for evanescence excitation, Lab Chip, 10, 66, 10.1039/B908759A

Suriano, 2011, Femtosecond laser ablation of polymeric substrates for the fabrication of microfluidic channels, Appl. Surf. Sci., 257, 6243, 10.1016/j.apsusc.2011.02.053

Liu, K., Xiang, J., Ai, Z., Zhang, S., Fang, Y., Chen, T., Zhou, Q., Li, S., Wang, S., and Zhang, N. (2016). PMMA microfluidic chip fabrication using laser ablation and low temperature bonding with OCA film and LOCA. Microsyst. Technol., 1–6.

Yuen, 2010, Low-cost rapid prototyping of flexible microfluidic devices using a desktop digital craft cutter, Lab Chip, 10, 384, 10.1039/B918089C

Cassano, 2015, Use of vacuum bagging for fabricating thermoplastic microfluidic devices, Lab Chip, 15, 62, 10.1039/C4LC00927D

Islam, 2015, A study on the limits and advantages of using a desktop cutter plotter to fabricate microfluidic networks, Microfluid. Nanofluid., 19, 973, 10.1007/s10404-015-1626-9

Abgrall, 2007, Fabrication of planar nanofluidic channels in a thermoplastic by hot-embossing and thermal bonding, Lab Chip, 7, 520, 10.1039/b616134k

Peng, 2014, Micro hot embossing of thermoplastic polymers: A review, J. Micromech. Microeng., 24, 013001, 10.1088/0960-1317/24/1/013001

Jenkins, G., and Mansfield, C.D. (2013). Microfluidic Diagnostics: Methods and Protocols, Humana Press.

Focke, 2010, Lab-on-a-foil: Microfluidics on thin and flexible films, Lab Chip, 10, 1365, 10.1039/c001195a

Velten, 2008, Microfluidics on foil: State of the art and new developments, Proc. Inst. Mech. Eng. B J. Eng. Manuf., 222, 107, 10.1243/09544054JEM866

Mair, 2006, Injection molded microfluidic chips featuring integrated interconnects, Lab Chip, 6, 1346, 10.1039/B605911B

Attia, 2009, Micro-injection moulding of polymer microfluidic devices, Microfluid. Nanofluid., 7, 1, 10.1007/s10404-009-0421-x

Tsao, 2009, Bonding of thermoplastic polymer microfluidics, Microfluid. Nanofluid., 6, 1, 10.1007/s10404-008-0361-x

Roy, 2012, Thermal bonding of microfluidic devices: Factors that affect interfacial strength of similar and dissimilar cyclic olefin copolymers, Sens. Actuators B Chem., 161, 1067, 10.1016/j.snb.2011.12.011

Sun, 2006, Low-pressure, high-temperature thermal bonding of polymeric microfluidic devices and their applications for electrophoretic separation, J. Micromech. Microeng., 16, 1681, 10.1088/0960-1317/16/8/033

Yu, 2014, Rapid bonding enhancement by auxiliary ultrasonic actuation for the fabrication of cyclic olefin copolymer (COC) microfluidic devices, J. Micromech. Microeng., 24, 115020, 10.1088/0960-1317/24/11/115020

Yu, 2015, Low temperature and deformation-free bonding of pmma microfluidic devices with stable hydrophilicity via oxygen plasma treatment and PVA coating, RSC Adv., 5, 8377, 10.1039/C4RA12771D

Tsao, 2007, Low temperature bonding of PMMA and COC microfluidic substrates using UV/ozone surface treatment, Lab Chip, 7, 499, 10.1039/b618901f

Shinohara, 2011, Studies on low-temperature direct bonding of VUV, VUV/O3 and O2 plasma pretreated cyclo-olefin polymer, Sens. Actuators A Phys., 165, 124, 10.1016/j.sna.2010.04.006

Keller, 2016, Tacky cyclic olefin copolymer: A biocompatible bonding technique for the fabrication of microfluidic channels in COC, Lab Chip, 16, 1561, 10.1039/C5LC01498K

Wan, 2015, Liquid phase solvent bonding of plastic microfluidic devices assisted by retention grooves, Lab Chip, 15, 3785, 10.1039/C5LC00729A

Salvo, 2012, Adhesive bonding by SU-8 transfer for assembling microfluidic devices, Microfluid. Nanofluid., 13, 987, 10.1007/s10404-012-1011-x

Lu, 2008, Packaging of microfluidic chips via interstitial bonding, Electrophoresis, 29, 1407, 10.1002/elps.200700680

Lai, 2004, A packaging technique for polymer microfluidic platforms, Anal. Chem., 76, 1175, 10.1021/ac034990t

Toossi, 2015, Bonding pmma microfluidics using commercial microwave ovens, J. Micromech. Microeng., 25, 085008, 10.1088/0960-1317/25/8/085008

Soper, 2002, Surface modification of polymer-based microfluidic devices, Anal. Chim. Acta, 470, 87, 10.1016/S0003-2670(02)00356-2

Subramanian, 2011, Surface modification of droplet polymeric microfluidic devices for the stable and continuous generation of aqueous droplets, Langmuir, 27, 7949, 10.1021/la200298n

Vourdas, 2008, Plasma processing for polymeric microfluidics fabrication and surface modification: Effect of super-hydrophobic walls on electroosmotic flow, Microelectron. Eng., 85, 1124, 10.1016/j.mee.2007.12.032

Hu, 2002, Surface modification of poly(dimethylsiloxane) microfluidic devices by ultraviolet polymer grafting, Anal. Chem., 74, 4117, 10.1021/ac025700w

Zhou, 2012, Surface modification for pdms-based microfluidic devices, Electrophoresis, 33, 89, 10.1002/elps.201100482

Kitsara, 2013, Integration of functional materials and surface modification for polymeric microfluidic systems, J. Micromech. Microeng., 23, 033001, 10.1088/0960-1317/23/3/033001

Zilio, 2014, Universal hydrophilic coating of thermoplastic polymers currently used in microfluidics, Biomed. Microdevices, 16, 107, 10.1007/s10544-013-9810-8

Temiz, 2015, Lab-on-a-chip devices: How to close and plug the lab?, Microelectron. Eng., 132, 156, 10.1016/j.mee.2014.10.013

2012, Standards for connecting microfluidic devices?, Lab Chip, 12, 1022, 10.1039/c2lc20937c

Chen, 2009, High-pressure needle interface for thermoplastic microfluidics, Lab Chip, 9, 50, 10.1039/B812812J

Wilhelm, 2013, Connecting microfluidic chips using a chemically inert, reversible, multichannel chip-to-world-interface, Lab Chip, 13, 4343, 10.1039/c3lc50861g

Zou, 2007, Functionalized nano interdigitated electrodes arrays on polymer with integrated microfluidics for direct bio-affinity sensing using impedimetric measurement, Sens. Actuators A Phys., 136, 518, 10.1016/j.sna.2006.12.006

Kirsch, 2007, In Hybrid microfluidic systems: Combining a polymer microfluidic toolbox with biosensors, Proc. SPIE, 6465, 64650F

Godino, 2012, Fabricating electrodes for amperometric detection in hybrid paper/polymer lab-on-a-chip devices, Lab Chip, 12, 3281, 10.1039/c2lc40223h

Choi, 2010, 3-dimensional electrode patterning within a microfluidic channel using metal ion implantation, Lab Chip, 10, 783, 10.1039/b917719a

Oedit, 2015, Lab-on-a-chip hyphenation with mass spectrometry: Strategies for bioanalytical applications, Curr. Opin. Biotech., 31, 79, 10.1016/j.copbio.2014.08.009

Nge, 2013, Advances in microfluidic materials, functions, integration, and applications, Chem. Rev., 113, 2550, 10.1021/cr300337x

Fiorini, 2007, Fabrication improvements for thermoset polyester (TPE) microfluidic devices, Lab Chip, 7, 923, 10.1039/b702548c

Kim, 2011, Thermoset polyester droplet-based microfluidic devices for high frequency generation, Lab Chip, 11, 4108, 10.1039/c1lc20603f

Sollier, 2011, Rapid prototyping polymers for microfluidic devices and high pressure injections, Lab Chip, 11, 3752, 10.1039/c1lc20514e

Konstantinou, 2016, Combined hot embossing and milling for medium volume production of thermoplastic microfluidic devices, Sens. Actuators B Chem., 234, 209, 10.1016/j.snb.2016.04.147

Stoller, 2015, Thermoplastic building blocks for the fabrication of microfluidic masters, RSC Adv., 5, 97934, 10.1039/C5RA22742A

Vella, 2015, A new process chain for producing bulk metallic glass replication masters with micro- and nano-scale features, Int. J. Adv. Manuf. Technol., 76, 523, 10.1007/s00170-014-6148-1

Li, 2015, An oxidized liquid metal-based microfluidic platform for tunable electronic device applications, Lab Chip, 15, 766, 10.1039/C4LC01013B

Ho, 2015, 3D printed microfluidics for biological applications, Lab Chip, 15, 3627, 10.1039/C5LC00685F

Au, 2014, Mail-order microfluidics: Evaluation of stereolithography for the production of microfluidic devices, Lab Chip, 14, 1294, 10.1039/C3LC51360B

Gong, 2010, Wax-bonding 3D microfluidic chips, Lab Chip, 10, 2622, 10.1039/c004744a

Tsao, 2016, Magnetic microparticle-polydimethylsiloxane composite for reversible microchannel bonding, Sci. Technol. Adv. Mater., 17, 2, 10.1080/14686996.2016.1140301

Tan, 2010, A reliable method for bonding polydimethylsiloxane (PDMS) to polymethylmethacrylate (PMMA) and its application in micropumps, Sens. Actuators B Chem., 151, 133, 10.1016/j.snb.2010.09.035

Li, 2013, Selective stamp bonding of pdms microfluidic devices to polymer substrates for biological applications, Sens. Actuators A Phys., 193, 186, 10.1016/j.sna.2012.12.037

You, 2013, A doubly cross-linked nano-adhesive for the reliable sealing of flexible microfluidic devices, Lab Chip, 13, 1266, 10.1039/c2lc41266g

Yetisen, 2013, Paper-based microfluidic point-of-care diagnostic devices, Lab Chip, 13, 2210, 10.1039/c3lc50169h

Xia, 1998, Soft lithography, Annu. Rev. Mater. Sci., 28, 153, 10.1146/annurev.matsci.28.1.153