Journal of The Institution of Engineers (India): Series D

Công bố khoa học tiêu biểu

* Dữ liệu chỉ mang tính chất tham khảo

Sắp xếp:  
Proposition of an Accelerated Ageing Method for Natural Fibre/Polylactic Acid Composite
Journal of The Institution of Engineers (India): Series D - Tập 96 - Trang 151-158 - 2015
Clio Zandvliet, N. R. Bandyopadhyay, Dipa Ray
Natural fibre composite based on polylactic acid (PLA) composite is of special interest because it is entirely from renewable resources and biodegradable. Some samples of jute/PLA composite and PLA alone made 6 years ago and kept in tropical climate on a shelf shows too fast ageing degradation. In this work, an accelerated ageing method for natural fibres/PLA composite is proposed and tested. Expe...... hiện toàn bộ
A Mathematical and Experimental Approach to Improve Strength and Corrosion Resistance of Gas Tungsten Arc, Electron Beam and Friction Stir Welded AA2219-T87 Al-Alloy
Journal of The Institution of Engineers (India): Series D - Tập 104 Số 1 - Trang 1-13 - 2023
B. Rajnaveen, G. Rambabu, K. Sanjeevi Prakash, K. Srinivasa Rao
Synthesis of Alfa (Stipa tenacissima L.)/Hemp Fiber-Reinforced UHMWPE: Impact of Fibers on Mechanical, Microstructural and Aspect Properties
Journal of The Institution of Engineers (India): Series D - Tập 103 - Trang 611-620 - 2022
B. Vinod, S. Suresh, S. Sunil Kumar Reddy, D. Sudhakara, U. Uthirapathi Elaiyarasan
The use of natural wastes and biomasses has become a strategic sector widely used for industrial applications to meet sustainable development and cost-savings for Indians. The future growth is likely depending on the availability of biodegradable materials. In this study, two types of fibers, such as alkali-treated alfa fiber (ATAF) and alkali-treated hemp fiber (ATHF) with polyvinyl alcohol (PVA)...... hiện toàn bộ
Enhancing the Mechanical Behaviour of Fused Filament Fabricated Carbon Fibre-Reinforced Poly-lactic Acid
Journal of The Institution of Engineers (India): Series D - - Trang 1-8 - 2023
Akash Jain, Ankit Sahai, Rahul Swarup Sharma
Mechanical behaviour is affected by many fused filament fabrication parameters. If such components are meant for industrial use, this can become an important consideration. Poly-lactic acid (PLA) is the most promising material since it is biodegradable and lightweight. Because of its poor mechanical behaviour, PLA is still not widely used. Reinforcing PLA is one way to enhance its mechanical behav...... hiện toàn bộ
Wear Behavioral and Mechanical Studies on Liquid Forged VAL12 Alloy Strengthened by Lanthanum Oxide Dispersoids
Journal of The Institution of Engineers (India): Series D - - Trang 1-14 - 2020
S. A. Srinivasan, S. P. Kumaresh Babu, B. Thirumaran, A. Vallimanalan
Aluminium composite with VAL12 as matrix and La2O3 as dispersoids fabricated through liquid metallurgy route involving liquid forging operation through squeeze casting process in the present investigation. The frictional characteristics of as-cast aluminium composites are studied under dry sliding wear tests by varying the service factors. The samples prepared were examined for its uniform distrib...... hiện toàn bộ
Multi-objective Optimization of FDM Using Hybrid Genetic Algorithm-Based Multi-criteria Decision-Making (MCDM) Techniques
Journal of The Institution of Engineers (India): Series D - - 2024
Satish Chinchanikar, Sourabh Shinde, Avez Shaikh, Vaibhav Gaikwad, Nitin Ambhore
Thickness Evaluation of Aluminium Plate Using Pulsed Eddy Current Technique
Journal of The Institution of Engineers (India): Series D - Tập 94 - Trang 89-93 - 2013
Gurpartap Singh, Harsh Madhukar Bapat, Bhanu Pratap Singh, Manojit Bandyopadhyay, Rakesh Kumar Puri, Deepak Narayanrao Badodkar
This paper describes a pulsed eddy current (PEC) based non-destructive testing system used for detection of thickness variation in aluminium plate. A giant magneto-resistive sensor has been used instead of pick up coil for detecting resultant magnetic field. The PEC response signals obtained from 1 to 5 mm thickness change in aluminium plate were investigated. Two time domain features, namely peak...... hiện toàn bộ
Investigation on Dry Sliding Wear Behavior of Nylon66/GnP Nano-composite
Journal of The Institution of Engineers (India): Series D - Tập 98 - Trang 71-78 - 2016
Kota Sankara Narayana, Koka Naga Sai Suman, Kothapalli Arun Vikram
The tribological behavior of graphene nano platelets (GnP) reinforced Nylon66 polymer Nano composites were studied using a pin-on-disc apparatus under dry sliding conditions. The influence of wear control factors like applied load, velocity, sliding distance and weight percentage of GnP reinforcement on the responses like specific wear rate and frictional coefficient were investigated. Nano compos...... hiện toàn bộ
Microstructure and Nanoindentation response of Si3N4-Reinforced Magnesium-based Composite Synthesized by Powder Metallurgy Route
Journal of The Institution of Engineers (India): Series D - Tập 103 Số 1 - Trang 235-247 - 2022
Ankita Balikai, H. Adarsha, R. Keshavamurthy
Mechanical Properties and Microstructure of Ti–6Al–4V Alloy upon Exposure to High Heat and Chemical Quenching
Journal of The Institution of Engineers (India): Series D - - 2024
Saurabh Dewangan, Avaneesh Rajesh Kulkarni, Rohit Varshney, P. Pavan Kumar Reddy
Ti–6Al–4V alloy is a lightweight metal that possesses an excellent combination of strength, formability, and corrosion resistance. It can retain its properties at high temperature applications. This is known as α + β Ti-alloy. It is a heat treatable grade in which properties can be varied moderately. In the present study, an experimental work has been carried out to check its ability to retain the...... hiện toàn bộ
Tổng số: 478   
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 10