Investigation on Dry Sliding Wear Behavior of Nylon66/GnP Nano-composite
Tóm tắt
The tribological behavior of graphene nano platelets (GnP) reinforced Nylon66 polymer Nano composites were studied using a pin-on-disc apparatus under dry sliding conditions. The influence of wear control factors like applied load, velocity, sliding distance and weight percentage of GnP reinforcement on the responses like specific wear rate and frictional coefficient were investigated. Nano composites were developed by melt mixing of various weight fractions of GnP (0/0.5/1/2) with nylon 66 using twin screw extruder. A design of experiments based on the Taguchi technique was performed to acquire data in a controlled way and was successfully used to identify the optimal combinations of control factors influencing the outputs. Analysis of variance was employed to investigate the influence and contribution of control factors on the responses. The results showed that the inclusion of GnP as reinforcing material in Nylon66 Nano composites, decreases the friction coefficient and increases the wear resistance of the Nano composites significantly.
Tài liệu tham khảo
Y.V. Suvorov, S.I. Alekseeva, M.A. Fronya, I.V. Viktorova, Investigations of physical and mechanical properties of polymeric nano composites (review). Inorg. Mater. 49(15), 1357 (2013)
Z. Eliezer, C.H. Ramage, H.G. Rylander, R.H. Flowers, M.F. Amateau, High-speed tribological properties of graphite fiber-Cu-Sn matrix composites. Wear 49(1), 119 (1978)
D.C. Phillips, R.A.J. Sambell, D.H. Bowen, The mechanical properties of carbon fibre reinforced pyrex glass. J. Mater. Sci. 7, 1454 (1972)
R.A.J. Sambell, D.H. Bowen, D.C. Phillips, Carbon fibre composites with ceramic and glass matrices-Part1. Discontinuous fibres. J. Mater. Sci. 7, 663 (1972)
S.B.C.A. Berg, J. Tirosh, Wear and friction of two different types of graphite fibre reinforced composite materials. Fibre Sci. Technol. 6(3), 159 (1973)
H. Porwal, S. Grasso, M. Reece, Review of graphene-ceramic matrix composites. Adv. Appl. Ceram. 112(8), 443 (2013)
H. Porwal, P. Tatarko, S. Grasso, C. Hu, A.R. Boccaccini, I. Dlouhý, M. Reece, Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nanoplatelets. Sci. Technol. Adv. Mater. 14, 1–10 (2013)
H. Porwal, S. Grasso, L. Cordero-Arias, C. Li, A. Boccaccini, M. Reece, Processing and bioactivity of 45S5 bioglasss-graphene nanoplatelets composites. J. Mater. Sci. Mater. Med. 25(6), 1403–1413 (2014)
U. Khan, P. May, H. Porwal, K. Nawaz, J.N. Coleman, Improved adhesive strength and toughness of poly vinyl acetate glue on addition of small quantities of grapheme. ACS Appl. Mater. Interface 5(4), 1423 (2013)
M.C. Liu, C.L. Chen, J. Hu, X.L. Wu, X.K. Wang, Synthesis of magnetite/graphene oxide composite and application for cobalt(II) removal. J. Phys. Chem. C 115(51), 25234 (2011)
C. Lee, X.D. Wei, J.W. Kysar, J. Hone, Measurement of the elastic properties and intrinsic strength of monolayer grapheme. Science 321(5887), 385 (2008)
A.K. Geim, K.S. Novoselov, The rise of grapheme. Nat. Mater. 6(3), 183 (2007)
A.A. Balandin, Thermal properties of graphene and nano structured carbon materials. Nat. Mater. 10(8), 569 (2011)
Y.C. Fan, W. Jiang, A. Kawasaki, Highly conductive few-layergraphene/Al2O3 nano composites with tunable charge carrier type. Adv. Funct. Mater. 22(18), 3882 (2012)
P. Miranzo, E. Garcia, C. Garcia, J. Gonzalez-Julian, M. Belmonte, M.I. Osendi, Anisotropic thermal conductivity of silicon nitride ceramics. J. Eur. Ceram. Soc. 32, 1847–1854 (2012)
C. Ozay, V. Savas, The optimization of Cutting parameters on surface roughness in tangential Turn-milling using Taguchi method. Adv. Nat. Appl. Sci. 6(6), 866 (2012)
K. Arun Vikram, C. Ratnam, K. Sankara Narayana, B.S. Ben, Assessment of surface roughness and MRR while machining Brass with HSS tool and carbide inserts. Indian J. Eng. Mater. Sci. 22(3), 321 (2015)
S.M. Phadke, Quality Engineering using Robust Design, vol. 59 (PTR Prentice-Hall Inc., Englewood, 1989)