The influence of polycrystal grain size on several mechanical properties of materials

E. O. Hall:Proc. Phys. Soc. London, 1951, vol. B64, p. 747.

N. J. Petch:J. Iron Steel Inst., 1953, vol. 174, p. 25.

R. W. Armstrong, I. Codd, R. M. Douthwaite, and N. J. Petch:Phil. Mag., 1962, vol. 7, p. 45.

N. J. Petch:Phil. Mag., 1956, vol. 1, p. 866.

R. W. Armstrong:Adv. in Materials Research, IV, Wiley-Interscience, N. Y., 1969.

G. I. Taylor:J. Inst. Metals, 1938, vol. 62, p. 307.

M. J. Marcinkowski and H. A. Lipsitt:Acta Met., 1962, vol. 10, p. 95.

G. Y. Chin, W. F. Hosford, Jr., and W. A. Backofen:Trans. TMS-AIME, 1964, vol. 230, p. 437.

J. D. Meakin and N. J. Petch: The University, Newcastle upon Tyne, England; presentation at Symposium on The Role of Substructure in the Mechanical Behavior of Metals, Dec. 5–7,1962, Orlando, Fla.; P. C. Jindal and R. W. Armstrong:Trans. TMS-AIME, 1967, vol. 239, p. 1856.

R. W. Armstrong:Acta Met., 1968, vol. 16, p. 347.

R. W. Armstrong:Dislocation Dynamics, p. 293, McGraw-Hill Book Co., N. Y., 1968.

R. W. Armstrong:Acta Met., 1967, vol. 15, p. 667.

D. V. Wilson:Met. Sci. J., 1967, vol. 1, p. 40.

. H. Westbrook, H. W. Schadler, and R. L. Fleischer (General Electric Research Laboratories, Schenectady, N. Y.) and A. A. Johnson (Brooklyn Polytechnic Institute, Brooklyn, N. Y.): presentation at spring meeting of AIME in New York, 1964; J. H. Westbrook:Met. Rev., 1964, vol. 9, p. 415.

F. E. Hauser, P. R. Landon, and J. E. Dorn:Trans. ASM, 1956, vol. 48, p.986.

A. N. Stroh:Adv. in Phys., 1957, vol. 6, p. 418.

E. Smith:Acta Met., 1966, vol. 14, pp. 985,991;Met. Sci. J., 1967, vol. 1, p. 119.

E. Smith and J. T. Barnby:Met. Sci. J., 1967, vol. 1, p. 56.

R. W. Armstrong:J. Ocean Engineering, 1969, vol. 1, p. 239.

A. H. Cottrell:Trans. TMS-AIME, 1958, vol. 212, p. 192.

N. J. Petch:Phil. Mag., 1958, vol. 3, p. 1089;Fracture, p. 54, Wiley and Technology Press, N. Y., 1959.

R. W. Armstrong:Phil. Mag., 1964, vol. 9, p. 1063.

J. R. Low:Relation of Properties to Microstructure, p. 163, ASM, Cleveland, 1953.

J. Heslop and N. J. Petch:Phil. Mag, 1956, vol. 1, p. 866.

D. Hull and I. L. Mogford:Phil. Mag., 1958, vol. 3, p. 1213.

A. Cracknell and N. J. Petch:Acta Met., 1955, vol. 3, p. 186.

R. W. Armstrong: Brown University Report E38, 1967.

G. A. Alers, R. W. Armstrong, and J. H. Bechtold:Trans. TMS-AIME, 1958, vol. 212, p. 523.

R. Hill:Plasticity, p. 245, Clarendon Press, Oxford, 1950.

T. R. Wilshaw and P. L. Pratt:J. Mech. Phys. Sol, 1966, vol. 14, p. 7.

T. J. Agnor and M. E. Shank:J. Appl. Phys., 1950, vol. 21, p. 939.

G. W. Greenwood and A. G. Quarrell:J. Inst. Metals, 1953–54, vol. 82, p. 551.

J. A. Chapman and D. V. Wilson:J. Inst. Metals, 1962–63, vol. 91, p. 39.

J. E. J. Bunce and R. E. Evans:The Metallurgy of Beryllium, p. 246, Chapman and Hall, London, 1963.

H. Conrad and I. Perlmutter:Conf. Intern. sur la Met. du Beryllium, p. 319, French University Press, Paris, 1965.

W. H. Bassett and C. H. Davis:AIME Trans., 1919, vol. 60, p. 428.

H. L. Walker and W. J. Craig: AIME Tech. Pub. 2478, Metals Technology, 1948.

G. M. Sinclair and W. J. Craig:Trans. ASM, 1952, vol. 44, p. 929.

S. L. Chanon and H. L. Walker:Trans. ASM, 1953, vol. 45, p. 200.

W. J. Babyak and F. N. Rhines:Trans. TMS-AIME, 1960, vol. 218, p. 542; discussion,ibid., p. 1122.

C. Jindal and R.W. Armstrong:Trans. TMS-AIME, 1967, vol. 239, p. 1856;Ibid., 1969, vol. 245, p. 623.

H. T. Angus and P. F. Summers:J. Inst. Metals, 1925, vol. 33, p. 115.

G. W. Wensch and H. L. Walker:Trans. ASM, 1952, vol. 44, p. 1186.

T Ishigaki:Sci. Rep. Tohoku Imp. Univ., 1927, vol. 16(2), p. 285.

R. F. Bunshah and R. W. Armstrong: Univ. Cal. Lawrence Rad. Lab. Preprint 70718, 1968;Mater. Res. Bull., 1969, vol. 4, p. 239.

H. Hu and R. S. Cline:Trans. TMS-AIME, 1968, vol. 242, p. 1013; R. W. Armstrong and P. C. Jindal:ibid., p. 2513.

D. Tabor:J. Inst. Metals, 1951, vol. 79, p. 1;The Hardness of Metals, Clarendon Press, Oxford, 1951.

E. O. Hall:Nature, 1954, vol. 173, p. 948.

F. C. Holden, H. R. Ogden, and R. I. Jaffee:AIME Trans., 1953, vol. 197, p. 238.

A. T. Churchman:Acta Met., 1955, vol. 3, p. 22.

D. S. Dugdale:J. Mech. Phys. Solids, 1958, vol. 6, p. 85.

H. Buckle:Met. Rev., 1959, vol. 4, p. 49.

R. W. Armstrong:J. Mech. Phys. Solids, 1961, vol. 9, p. 196.

G. M. Sinclair and W. J. Craig:Trans. ASM, 1952, vol. 44, p. 929.

H. Okubo, S. Murakami, and K. Hosono:J. Inst. Metals, 1962–63, vol. 91, p.95.

R. P. Carreker:Trans. ASM, 1952, vol. 44, p. 946.

T. E. Mitchell and P. R. Thornton:Phil Mag., 1963, vol. 8, p. 1127.

P. G. Forrest and A. E. L. Tate:J. Inst. Metals, 1964–65, vol. 93, p. 438.

G. A. Miller, D. H. Avery, and W. A. Backofen:Trans. TMS-AIME, 1966, vol.236, p. 1667.

G. Oates and D. V. Wilson:Acta Met., 1964, vol. 12, p. 21.

A. Yoshikawa and F. Sugeno;Trans. TMS-AIME, 1965, vol. 233, p. 1314.

M. Klesnil, M. Holzmann, P. Lukas, and P. Rys:J. Iron Steel Inst., 1965, vol.203, p. 47.

A. M. Adair and H. A. Lipsitt:Trans. TMS-AIME, 1966, vol. 236, p. 1235.

W. L. Phillips and R. W. Armstrong:J. Mech. Phys. Solids, 1969, vol. 17, p.265.

P. O. Kettunen:Acta Poly. Scand, 1964, Chap. 29;Phil Mag., 1966, vol. 14, p. 421.

F. Garofalo:Fundamentals of Creep and Creep-Rupture in Metals, The Macmillan Co., N. Y., 1965.

J. J. Gilman:Trans. ASM, 1966, vol. 59, p. 597.

P. Feltham:Proc. Phys. Soc. London, 1956, vol. B69, p. 1173.

P. Feltham and J. D. Meakin:Acta Met., 1959, vol. 7, p. 614.

P. Feltham and G. J. Copley:Phil Mag., 1960, vol. 5, p. 649.

O. D. Sherby:Acta Met., 1962, vol. 10, p. 135.

A. Seeger:Dislocations and Mechanical Properties of Crystals, p. 243, John Wiley & Sons, N. Y., 1957.

H. Conrad:J. Iron Steel Inst., 1961, vol. 198, p. 364;Ironand Its Dilute Solid Solutions, p. 315, Interscience, N. Y., 1963.

J. Heslop and N. J. Petch:Phil. Mag., 1958, vol. 3, p. 1128.

J. D. Campbell and J. Harding:Response of Metals to High Velocity Deformation, p. 51, Interscience, N. Y., 1961.

H. Conrad and W. D. Robertson:AIME Trans., 1957, vol. 209, p. 503;ibid., 1958, vol. 212, p. 536.

P. Shahinian and J. R. Lane:Trans. ASM, 1953, vol. 45, p. 177.