The Deposition Mechanism and Protective Properties of Manganese-Based Conversion Coatings on the Surface of AD31 Aluminum Alloy

Pleiades Publishing Ltd - Tập 56 - Trang 113-124 - 2020
D. S. Kharitonov1,2,3, I. V. Makarova1,4, M. A. Osipenko1, V. I. Yanushevskii1, A. Wrzesińska2, I. Bobowska2, I. I. Kurilo1
1Belarusian State Technological University, Minsk, Belarus
2Lodz University of Technology, Lodz, Poland
3Jerzy Haber Institute of Catalysis and Surface Chemistry of Polish Academy of Sciences, Krakow, Poland
4Lappeenranta University of Technology, Lappeenranta, Finland

Tóm tắt

The stage mechanism of manganese-containing conversion coatings (MCCs) formation on the surface of AD31 alloy (AA6063) in acidic (pH 3) KMnO4 solutions, as well as their structure, composition, and anticorrosion properties have been examined using scanning electron microscopy, energy dispersive X‑ray microanalysis, Raman spectroscopy, UV–Vis spectroscopy, electrochemical impedance spectroscopy, potentiodynamic polarization, and salt spray chamber tests. The conditions for obtaining MCCs have been optimized, and the feasibility of their use in multicomponent corrosion protection systems for the AD31 aluminum alloy has been shown.

Tài liệu tham khảo

Birbilis, N. and Buchheit, R.G., J. Electrochem. Soc., 2005, vol. 152, pp. B140–B151. Kharitonov, D.S., Dobryden, I.B., Sefer, B., et al., Prot. Met. Phys. Chem. Surf., 2018, vol. 54, pp. 291–300. Kharitonov, D.S., Ornek, C., Claesson, P.M., et al., J. Electrochem. Soc., 2018, vol. 165, pp. C116–C126. Zhang, F., Nilsson, J.-O., and Pan, J., J. Electrochem. Soc., 2016, vol. 163, pp. C609–C618. Kazemi, M., Danaee, I., and Zaarei, D., Materialwiss. Werkstofftech., 2014, pp. 574–581. Scamans, G.M., Birbilis, N., and Buchheit, R.G., Shreir’s Corrosion. Corrosion of Aluminum and its Alloys, Amsterdam: Elsevier, 2010. Yasakau, K.A., Tedim, J., Zheludkevich, M.L., and Ferreira, M.G.S., Handbook of Smart Coatings for Materials Protection, Smart Coatings for Corrosion Protection, An Overview, Cambridge: Woodhead Publ., 2014, pp. 224–274. Pokorny, P., Tej, P., and Szelag, P., Metalurgija, 2016, vol. 55, pp. 253–256. Ates, M., J. Adhes. Sci. Technol., 2016, vol. 30, pp. 1510–1536. Twite, R.L. and Bierwagen, G.P., Prog. Org. Coat., 1998, vol. 33, pp. 91–100. Kharitonov, D.S., Kurilo, I.I., Wrzesinska, A., and Zharskii, I.M., Materialwiss. Werkstofftech., 2017, vol. 48, pp. 646–660. Zhao, J., Xia, L., Sehgal, A., et al., Surf. Coat. Technol., 2001, vol. 140, pp. 51–57. Xia, L., Akiyama, E., Frankel, G., and McCreery, R., J. Electrochem. Soc., 2000, vol. 147, p. 2556. Buchheit, R.G., Mamidipally, S.B., Schmutz, P., and Guan, H., Corrosion, 2002, vol. 58, pp. 3–14. Toxicological Profile for Chromium, Atlanta, GA: U.S. Department of Health and Human Services, 2012. Qi, J., Hashimoto, T., Thompson, G.E., and Carr, J., J. Electrochem. Soc., 2016, vol. 163, pp. C131–C138. Shruthi, T.K. and Swain, G.M., J. Electrochem. Soc., 2018, vol. 165, pp. C103–C105. Li, L., Kim, D.Y., and Swain, G.M., J. Electrochem. Soc., 2012, vol. 159, pp. C326–C333. Liang, C.S., Lv, Z.F., Zhu, Y.L., et al., Appl. Surf. Sci., 2014, vol. 288, pp. 497–502. Yao, Y., Zhou, Y., Zhao, C., et al., J. Electrochem. Soc., 2013, vol. 160, pp. C185–C188. Kulinich, S.A., Akhtar, A.S., Wong, P.C., et al., Thin Solid Films, 2007, vol. 515, pp. 8386–8392. Zou, Z., Li, N., Li, D., et al., J. Alloys Compd., 2011, vol. 509, pp. 503–507. Guan, H. and Buchheit, R.G., Corrosion, 2004, vol. 60, pp. 284–296. Milošev, I. and Frankel, G.S., J. Electrochem. Soc., 2018, vol. 165, pp. C127–C144. Li, L., Whitman, B.W., Munson, C.A., et al., J. Electrochem. Soc., 2016, vol. 163, pp. C718–C728. Li, L., Whitman, B.W., and Swain, G.M., J. Electrochem. Soc., 2015, vol. 162, pp. C279–C284. Hughes, A.E., Harvey, T.G., Birbilis, N., et al., Handbook of Smart Coatings for Materials Protection: Coatings for Corrosion Prevention Based on Rare Earths, Cambridge: Woodhead Publ., 2014, pp. 186–232. Harvey, T.G., Corros. Eng. Sci. Technol., 2013, vol. 48, pp. 248–269. Yoganandan, G., Balaraju, J.N., and William Grips, V.K., Appl. Surf. Sci., 2012, vol. 258, pp. 8880–8888. Madden, S.B. and Scully, J.R., J. Electrochem. Soc., 2014, vol. 161, pp. C162–C175. Osipenko, M.A., Yanushevskii, V.I., Kharitonov, D.S., et al., Vestn. Tekhnol. Univ., 2017, vol. 20, pp. 5–9. Lopez-Garrity, O. and Frankel, G.S., J. Electrochem. Soc., 2013, vol. 161, pp. C95–C106. Prabhu, D. and Rao, P., Arabian J. Chem., 2017, vol. 10, pp. S2234–S2244. Bernard, M., Goff, A.H., Thi, B.V., et al., J. Electrochem. Soc., 1993, vol. 140, pp. 3065–3070. Julien, C.M., Massot, M., and Poinsignon, C., Spectrochim. Acta, Part A, 2004, vol. 60, pp. 689–700. Mironova-Ulmane, N., Kuzmin, A., and Grube, M., J. Alloys Compd., 2009, vol. 480, pp. 97–99. Julien, C., Massot, M., Baddour-Hadjean, R., et al., Solid State Ionics, 2003, vol. 159, pp. 345–356. Buciuman, F., Patcas, F., Craciun, R., and Zahn, D.R.T., Phys. Chem. Chem. Phys., 1999, vol. 1, pp. 185–190. Gu, X., Yue, J., Chen, L., et al., J. Mater. Chem. A, 2015, vol. 3, pp. 1037–1041. White, W.B. and Keramidas, V.G., Spectrochim. Acta, Part A, 1971, vol. 28, pp. 501–509. Strohmeier, B.R. and Hercules, D.M., J. Phys. Chem., 1984, vol. 88, pp. 4922–4929. Hughes, A.E., Gorman, J.D., Harvey, T.G., et al., Corrosion, 2006, vol. 62, pp. 773–780. Li, J., Hurley, B., and Buchheit, R., J. Electrochem. Soc., 2015, vol. 162, pp. C219–C227. Kharitonov, D.S., Kurilo, I.I., and Zharskii, I.M., Russ. J. Appl. Chem., 2017, vol. 90, pp. 1089–1097. Jaganyi, D., Altaf, M., and Wekesa, I., Appl. Nanosci., 2013, vol. 3, pp. 329–333. Butterfield, C.N., Soldatova, A.V., Lee, S.-W., et al., Proc. Natl. Acad. Sci. U. S. A., 2013, vol. 110, pp. 11731–11735. Li, T., Wu, J., Xiao, X., et al., RSC Adv., 2016, vol. 6, pp. 13914–13919. Jin, Q., Arimoto, H., Fujishima, M., and Tada, H., Catalysts, 2013, vol. 3, pp. 444–454. Guo, L.Q., Qin, S.X., Yang, B.J., et al., Sci. Rep., 2017, vol. 7, pp. 8–13. Craig, B.D., Fundamental Aspects of Corrosion Films in Corrosion Science, New York: Springer, 1990.