Tests and direct strength design on cold-formed steel channel beams with web holes

Yu, 1973, Cold-formed steel members with perforated elements, J. Struct Division, 99, 2061, 10.1061/JSDEAG.0003620 Oritz-Colberg, 1981 Shanmugam, 1999, Design formula for axially compressed perforated plates, Thin-walled Struct, 34, 1, 10.1016/S0263-8231(98)00052-4 Shanmugam, 2001, Design for openings in cold-formed steel channel stub columns, Thin-walled Struct, 39, 961, 10.1016/S0263-8231(01)00045-3 Loov, 2011, Local Buckling capacity of C-shaped cold-formed steel sections with punched webs, Can J Civ Eng, 11, 1 Moen, 2008, Experiments on cold-formed steel columns with holes, Thin-Walled Struct, 46, 1164, 10.1016/j.tws.2008.01.021 Moen, 2011, Direct strength method for design of cold-formed steel columns with holes, J Struct Eng, 137, 559, 10.1061/(ASCE)ST.1943-541X.0000310 Yu, 2012, Cold-formed steel flexural member with edge stiffened holes: behavior, optimization, and design, Steel Construct, 71, 210, 10.1016/j.jcsr.2011.09.008 Moen, 2013, Experiments on cold-formed steel C-section joists with unstiffened web holes, J Struct Eng, 139, 695, 10.1061/(ASCE)ST.1943-541X.0000652 Steel Stud Manufacturers Association (SSMA). Product technical information. Steel Stud Manufacturers Association, Chicago; 2010. Wang, 2015, Beam tests of cold-formed steel built-up sections with web perforations, J Constr Steel Res, 115, 18, 10.1016/j.jcsr.2015.08.001 Wang, 2017, Design of cold-formed steel built-up sections with web perforations subjected to bending, Thin-Walled Struct, 120, 458, 10.1016/j.tws.2017.06.016 Chinese standard for metallic materials-tensile testing at ambient temperature. GB/T228: 2002; 2002 [in Chinese]. Zeinoddini, 2012, Simulation of geometric imperfections in cold-formed steel members using spectral representation approach, Thin-Walled Struct, 60, 105, 10.1016/j.tws.2012.07.001 Wang, 2009, Experimental and numerical investigation on cold-formed steel C-section flexural members, J Constr Steel Res, 65, 1225, 10.1016/j.jcsr.2008.08.007 Wang, 20161, Compression tests and numerical analysis of web-stiffened channels with complex edge stiffeners, J Constr Steel Res, 116, 29, 10.1016/j.jcsr.2015.08.013 Schafer, 1998, Direct strength prediction of cold-formed steel members using numerical elastic buckling solutions, 137 North American specification (NAS). North American specification for design of cold-formed steel structural members. American Iron and Steel Institute, Washington, DC; 2016. Moen, 2008 Moen, 2009, Elastic buckling of cold-formed steel columns and beams with holes, Eng Struct, 31, 2812, 10.1016/j.engstruct.2009.07.007