Stress corrosion cracking and corrosion fatigue of nuclear reactor pressure vessel steels in hot water

M.O. Speidel, “Stress corrosion cracking and corrosion fatigue-fracture mechanics,” in [7], pp. 85–132.

H.L. Logan,The Stress Corrosion of Metals, John Wiley, New York, 1966.

M.O. Speidel, “Stress Corrosion Cracking of Nuclear Pressure Vessel Steel,” Proc. IAEA Specialists’ meeting on Subcritical Crack Growth, Sendai, Japan, May 15–17, 1985, NUREG/CP-0067 MEA-2090, 1986, Vol. 1, pp. 465–476.

M.O. Speidel and R.M. Magdowski, “Stress Corrosion Cracking of Steam Turbine Steels—an Overview,” Proc. Second International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, Monterey, CA, Sept. 9–12, 1985, ANS, 1986, pp. 267–275.

M.O. Speidel and R.M. Magdowski, “Environmental Cracking in Steam Turbines,” Proc. CORROSION/86, March 17–21, 1986, Houston, TX.

M.O. Speidel, unpublished work, ETH Zurich, Switzerland, 1985.

M.O. Speidel and A. Atrens, editors,Corrosion in Power Generating Equipment, Plenum Press, New York and London, 1984.

Proceedings of the International Atomic Energy Agency Specialists’ Meeting on Subcritical Crack Growth, Freiburg, 1981, NUREG/CP-0044 MEA-2014, Vol I and II, 1983.

IAEA Specialists’ Meeting on Subcritical Crack Growth, May 1985, Reports of the Research Institute for Strength and Fracture of Materials, Tohoku University, Senday, Japan, Vol. 19, 1985.

Proceedings of IAEA Specialists’ Meeting on Subcritical Crack Growth, Sendai, 1985. To be published as NUREG report, USA, 1986.

H.C. Cowen, P. Hurst, and G.J. Lloyd, “The JCCGR inter-laboratory round robin on slow strain rate stress corrosion testing of PWR forging,” in [9], pp. 120–136.

Markus O. Speidel, “Fatigue crack growth at high temperatures” inHigh-temperature materials in gas turbines, P.R. Sahm and M.O. Speidel, editors, Elsevier, Amsterdam, London, New York, 1984, pp. 250–255.

R.L. Jones, “Results of ICCGR Cyclic Crack Growth Round Robin Test Programs,” in [10].

B. Tomkins and P.M. Scott, “Some thoughts on establishing design and inspection codes for corrosion fatigue,”in [8], pp. 329–342.

J.D. Atkinson, P.M. Scott and D.R. Tice, “A review of the UK research programme on corrosion fatigue crack propagation in pressure vessel steels exposed to PWR environments,” in [9], pp. 166–173, and in [10].