Self-adhesive resin cements - chemistry, properties and clinical considerations
Tóm tắt
Từ khóa
Tài liệu tham khảo
Radovic, 2008, Self-adhesive resin cements: a literature review, J Adhes Dent, 10, 251
Bowen RL Dental filling material comprising vinyl silane treated fused silica and a binder consisting of the reaction product of bisphenol and glycidyl acrylate 1962
Bowen, 1963, Properties of a silica-reinforced polymer for dental restorations, J Am Dent Assoc, 66, 57, 10.14219/jada.archive.1963.0010
Bowen RL Method of preparing a monomer having phenoxy and methacrylate groups linked by hydroxy glyceryl groups 1965
Buonocore, 1955, Simple method of increasing the adhesion of acrylic filling materials to enamel surfaces, J Dent Res, 34, 849, 10.1177/00220345550340060801
Smith, 1968, A new dental cement, Br Dent J, 124, 381
Wilson, 1971, The glass ionomer cement: a new translucent dental filling material, J Appl Chem Biotechnol, 21, 313, 10.1002/jctb.5020211101
Antonucci, 1987, Formulation and evaluation of resin modified glass ionomer cements, Trans Soc Biomater, 13, 225
Mathis, 1989, Properties of a glass-ionomer/resin-composite hybrid material, Dent Mater, 5, 355, 10.1016/0109-5641(89)90130-9
Wilson, 1990, Resin-modified glass-ionomer cements, Int J Prosthodont, 3, 425
Mitra, 1991, Adhesion to dentin and physical properties of a light-cured glass-ionomer liner/base, J Dent Res, 70, 72, 10.1177/00220345910700011201
Fu, 2005, Evidence of chemical bonding to hydroxyapatite by phosphoric acid esters, Biomaterials, 26, 5104, 10.1016/j.biomaterials.2005.01.035
Nagakane, 2006, Analysis of chemical interaction of 4-MET with hydroxyapatite using XPS, Dent Mater J, 25, 645, 10.4012/dmj.25.645
Van Landuyt, 2008, Influence of the chemical structure of functional monomers on their adhesive performance, J Dent Res, 87, 757, 10.1177/154405910808700804
Nicholson, 2007, Polyacid-modified composite resins (“compomers”) and their use in clinical dentistry, Dent Mater, 23, 615, 10.1016/j.dental.2006.05.002
Martin, 1997, Dentin bond strength of Dyract Cem, Am J Dent, 10, 27
Moodley, 2000, In vitro evaluation of two adhesive systems used with compomer filling materials, Int Dent J, 50, 400, 10.1111/j.1875-595X.2000.tb00576.x
Shaw, 1998, Fluoride release from glass-ionomer and compomer restorative materials: 6-month data, J Dent, 26, 355, 10.1016/S0300-5712(97)00016-X
Grobler, 1998, A comparison of fluoride release from various dental materials, J Dent, 26, 259, 10.1016/S0300-5712(97)00011-0
Yoshida, 2004, Comparative study on adhesive performance of functional monomers, J Dent Res, 83, 454, 10.1177/154405910408300604
Inoue, 2005, Hydrolytic stability of self-etch adhesives bonded to dentin, J Dent Res, 84, 1160, 10.1177/154405910508401213
Belli, 2009, In vitro wear gap formation of self-adhesive resin cements: a CLSM evaluation, J Dent, 37, 984, 10.1016/j.jdent.2009.08.006
Moszner, 2007, Recent developments of new components for dental adhesives and composites, Macromol Mater Eng, 292, 245, 10.1002/mame.200600414
Pavlinec, 2009, Monomers for adhesive polymers, 8(a) crosslinking polymerization of selected N-substituted bis(acrylamide)s for dental filling materials, J Appl Polym Sci, 113, 3137, 10.1002/app.30188
Catel, 2008, Synthesis, photopolymerization and adhesive properties of new hydrolytically stable phosphonic acids for dental applications, J Polym Sci A Polym Chem, 46, 7074, 10.1002/pola.23013
Catel, 2009, Synthesis, photopolymerization, and adhesive properties of new bisphosphonic acid monomers for dental application, J Polym Sci A Polym Chem, 47, 5258, 10.1002/pola.23575
Salz, 2005, Hydrolytic stability of self-etching adhesive systems, J Adhes Dent, 7, 107
Antonucci, 2008, Effect of ethyl-alpha-hydroxymethylacrylate on selected properties of copolymers and ACP resin composites, J Mater Sci: Mater Med, 19, 3263, 10.1007/s10856-008-3463-9
Klee JE Lehmann U Dental adhesive composition comprising polymer 2008
Kumbuloglu, 2004, A study of the physical and chemical properties of four resin composite luting cements, Int J Prosthodont, 17, 357
Vrochari, 2009, Curing efficiency of four self-etching, self-adhesive resin cements, Dent Mater, 25, 1104, 10.1016/j.dental.2009.02.015
Suh, 2003, Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers, J Adhes Dent, 5, 267
Han, 2007, Evaluation of physical properties and surface degradation of self-adhesive resin cements, Dent Mater J, 26, 906, 10.4012/dmj.26.906
Cantoro, 2008, Effect of pre-cure temperature on the bonding potential of self-etch and self-adhesive resin cements, Dent Mater, 24, 577, 10.1016/j.dental.2007.06.012
Spinell, 2009, Polymerization shrinkage kinetics of dimethacrylate resin-cements, Dent Mater, 25, 1058, 10.1016/j.dental.2009.04.008
Gerth, 2006, Chemical analysis and bonding reaction of RelyX Unicem and Bifix composites - a comparative study, Dent Mater, 22, 934, 10.1016/j.dental.2005.10.004
De Munck, 2004, Bonding of an auto-adhesive luting material to enamel and dentin, Dent Mater, 20, 963, 10.1016/j.dental.2004.03.002
Al-Assaf, 2007, Interfacial characteristics of adhesive luting resins and composites with dentine, Dent Mater, 23, 829, 10.1016/j.dental.2006.06.023
Monticelli, 2008, Limited decalcification/diffusion of self-adhesive cements into dentin, J Dent Res, 87, 974, 10.1177/154405910808701012
Piwowarczyk, 2003, Mechanical properties of luting cements after water storage, Oper Dent, 28, 535
Behr, 2008, Changes of cement properties caused by mixing errors: the therapeutic range of different cement types, Dent Mater, 24, 1187, 10.1016/j.dental.2008.01.013
Black, 2007, Effect of power toothbrushing on simulated wear of dental cement margins, J Dent Hyg, 81, 1
Yip, 2004, Effects of artificial saliva and APF gel on the surface roughness of newer glass ionomer cements, Oper Dent, 29, 661
Wan Bakar, 2008, Susceptibility of selected tooth-coloured dental materials to damage by common erosive acids, Aust Dent J, 53, 226, 10.1111/j.1834-7819.2008.00053.x
Walter, 2005, Microtensile bond strength of luting materials to coronal and root dentin, J Esthet Restor Dent, 17, 165, 10.1111/j.1708-8240.2005.tb00107.x
Escribano, 2006, Microtensile bond strength of self-adhesive luting cements to ceramic, J Adhes Dent, 8, 337
Goracci, 2006, Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces, J Adhes Dent, 8, 327
Yang, 2006, Micro-tensile bond strength of three luting resins to human regional dentin, Dent Mater, 22, 45, 10.1016/j.dental.2005.02.009
Hikita, 2007, Bonding effectiveness of adhesive luting agents to enamel and dentin, Dent Mater, 23, 71, 10.1016/j.dental.2005.12.002
Sarr, 2010, Immediate bonding effectiveness of contemporary composite cements to dentin, Clin Oral Investig, 14, 569, 10.1007/s00784-009-0327-8
Abo-Hamar, 2005, Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel, Clin Oral Invest, 9, 161, 10.1007/s00784-005-0308-5
Piwowarczyk, 2007, Long-term bond between dual-polymerizing cementing agents and human hard dental tissue, Dent Mater, 23, 211, 10.1016/j.dental.2006.01.012
Toman, 2008, Bond strength of all-ceramics to tooth structure using new luting systems, J Adhes Dent, 10, 373
Holderegger, 2008, Shear bond strength of resin cements to human dentin, Dent Mater, 24, 944, 10.1016/j.dental.2007.11.021
Lührs, 2010, Shear bond strength of self-adhesive resins compared to resin cements with etch and rinse adhesives to enamel and dentin in vitro, Clin Oral Invest, 14, 193, 10.1007/s00784-009-0279-z
Bitter, 2009, Morphological and bond strength evaluation of different resin cements to root dentin, Eur J Oral Sci, 117, 326, 10.1111/j.1600-0722.2009.00623.x
Ernst, 2005, In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents, J Prosthet Dent, 93, 551, 10.1016/j.prosdent.2005.04.011
Piwowarczyk, 2005, The shear bond strength between luting cements and zirconia ceramics after two pre-treatments, Oper Dent, 30, 382
Kumbuloglu, 2006, Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods, Oper Dent, 31, 248, 10.2341/05-22
Lüthy, 2006, Effect of thermocycling on bond strength of luting cements to zirconia ceramic, Dent Mater, 22, 195, 10.1016/j.dental.2005.04.016
Blatz, 2007, Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia, Quintessence Int, 38, 745
Blatz, 2010, In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion, Clin Oral Invest, 14, 187, 10.1007/s00784-009-0278-0
Wolfart, 2006, Retention forces and seating discrepancies of implant-retained castings after cementation, Int J Oral Maxillofac Implants, 21, 519
Vicente, 2005, A comparison of the shear bond strength of a resin cement and two orthodontic resin adhesive systems, Angle Orthod, 75, 109
Bishara, 2006, Early shear bond strength of a one-step self-adhesive on orthodontic brackets, Angle Orthod, 76, 689
Bott, 2003, Effect of different luting materials on the marginal adaptation of class I ceramic inlay restorations in vitro, Dent Mater, 19, 264, 10.1016/S0109-5641(02)00038-6
Rosentritt, 2004, Influence of cement type on the marginal adaptation of all-ceramic MOD inlays, Dent Mater, 20, 463, 10.1016/j.dental.2003.05.004
Frankenberger, 2008, Luting of ceramic inlays in vitro: marginal quality of self-etch and etch-and-rinse adhesives versus self-etch cements, Dent Mater, 24, 185, 10.1016/j.dental.2007.04.003
Behr, 2004, Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems, Dent Mater, 20, 191, 10.1016/S0109-5641(03)00091-5
Piwowarczyk, 2005, Microleakage of various cementing agents for full cast crowns, Dent Mater, 21, 445, 10.1016/j.dental.2004.07.009
Ibarra, 2007, Microleakage of porcelain veneer restorations bonded to enamel and dentin with a new self-adhesive resin-based dental cement, Dent Mater, 23, 218, 10.1016/j.dental.2006.01.013
Ngo Uy, 2006, Load-fatigue performance of gold crowns luted with resin cements, J Prosthet Dent, 95, 315, 10.1016/j.prosdent.2006.01.016
Burke, 2006, Effectiveness of a self-adhesive resin luting system on fracture resistance of teeth restored with dentin-bonded crowns, Eur J Prosthodont Restor Dent, 14, 185
Miyaura, 1999, Comparison of biting forces in different age and sex groups: a study of biting efficiency with mobile and non-mobile teeth, J Oral Rehabil, 26, 223, 10.1046/j.1365-2842.1999.00364.x
Blatz, 2008, Influence of cementation technique on fracture strength and leakage of alumina all-ceramic crowns after cyclic loading, Quint Int, 39, 23
Preuss, 2008, Influence of type of luting cement used with all-ceramic crowns on load capability of post-restored endodontically treated maxillary central incisors, Clin Oral Invest, 12, 151, 10.1007/s00784-007-0164-6
De Souza Costa, 2006, Human pulp response to resin cements used to bond inlay restorations, Dent Mater, 22, 954, 10.1016/j.dental.2005.10.007
Ulker, 2009, Cytotoxicity evaluation of self adhesive composite resin cements by dentin barrier test on 3D pulp cells, Eur J Dent, 3, 120, 10.1055/s-0039-1697418
De Mendonça, 2007, Cytotoxic effects of hard-setting cements applied on the odontoblast cell line MDPC-23, Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 104, e102, 10.1016/j.tripleo.2007.05.017
Christensen, 1993, The rise of resin for cementing restorations, J Am Dent Assoc, 124, 104, 10.14219/jada.archive.1993.0201
Rosenstiel, 1998, Dental luting agents: a review of the literature, J Prosthet Dent, 30, 280, 10.1016/S0022-3913(98)70128-3
Zidan, 2003, The retention of complete crowns prepared with three different tapers and luted with four different cements, J Prosthet Dent, 89, 565, 10.1016/S0022-3913(03)00182-3
Burke, 2001, Ease of use versus clinical effectiveness of restorative materials, Quintessence Int, 32, 239
Brunton, 2005, Contemporary dental practice in the UK: indirect restorations and fixed prosthodontics, Br Dent J, 198, 99, 10.1038/sj.bdj.4811980
Mandel, 1993, Clinical research - the silent partner in dental practice, Quintessence Int, 24, 453
Burke, 1993, Research in dental practice - problems and solutions, Br Dent J, 175, 396, 10.1038/sj.bdj.4808335
Hilton, 2004, A clinical comparison of two cements for levels of post-operative sensitivity in a practice-based setting, Oper Dent, 29, 241
Burke, 2005, Two-year evaluation of restorations of a packable composite placed in UK general dental practices, Br Dent J, 199, 293, 10.1038/sj.bdj.4812654
Crisp, 2008, A clinical evaluation of all-ceramic bridges placed in UK general dental practices: first year results, Br Dent J, 205, 477, 10.1038/sj.bdj.2008.937
Burke, 2006, A practice-based evaluation of the handling of a new self-adhesive universal resin luting material, Int Dent J, 56, 142, 10.1111/j.1875-595X.2006.tb00086.x
Christensen, 2003, Clinical Research Associates, CRA Newsl, 27, 4
Christensen, 2003, Clinical Research Associates, CRA Newsl, 27, 1
Crisp RJ Burke FJT Two-year performance of restorations placed with a self-adhesive luting material
Taschner, 2009, IPS Empress inlays luted with a self-adhesive resin cement after 1 year, Am J Dent, 2, 55
Behr, 2009, Self-adhesive resin cement versus zinc phosphate luting material: a prospective clinical trial begun 2003, Dent Mater, 25, 601, 10.1016/j.dental.2008.11.003
Trajtenberg, 2008, Microleakage of all-ceramic crowns using self-etching resin luting agents, Oper Dent, 33, 392, 10.2341/07-101
Burke FJT Fleming GJ Windmueller B Fracture strength of dentin-bonded crowns luted with a self-adhesive resin luting material