Self-Propagating High-Temperature Synthesis of a Thin-Layer CuO–B–Glass System

Allerton Press - Tập 60 - Trang 426-433 - 2019
A. M. Shulpekov1, O. V. Lapshin1
1Tomsk Scientific Center, Siberian Branch, Russian Academy of Sciences, Tomsk, Russia

Tóm tắt

Experimental studies are performed and mathematical models of the wave synthesis and thermal explosion in a thin-layer CuO–B–glass system are constructed. It is established that the propagation of the combustion front occurs in a multisource mode and its rate depends on the reaction layer thickness (d) according to the parabolic law with a maximum at d = 4 × 10–4 m. An increase in the reaction layer thickness promotes the improvement of thermal explosion characteristics in this system, while its dilution with an inert component makes it possible to form copper coatings with high electrical conductivity. An X-ray phase analysis and optical microscopy showed that the coating consists of metallic copper drops fused together and surrounded by a boron–lead silicate glass melt. Coatings have high electrical conductivity comparable with that of metals. It is found that an increase in the layer thickness above 4 × 10–4 m leads to a considerable decrease in the propagation rate of the combustion wave front due to loosening the initial mixture under the effect of evaporation of water vapor and gases adsorbed on powders and, consequently, to a decrease in heat transfer in the combustion front. Such coatings are nonconductive. Mathematical models of the wave synthesis and thermal explosion in a thin-layer Cu–B–glass system are developed in a macroscopic approximation. Numerical calculations of the process dynamics are performed. Theoretical evaluations satisfactorily correspond to the experimental data. Thermal and thermokinetic process constants are determined by the inverse problem method. Experimental samples of film electric heaters with high electrical conductivity and operational temperature are fabricated based on the experimental data and mathematical models.

Tài liệu tham khảo

Poate, J.M., Tu, K.N., and Mayer, J.W., Eds., Thin Films—Interdiffusion and Reactions, New York: Wiley-Interscience, 1978.

Dorfman, V.F., Sintez tverdotel’nykh struktur (Synthesis of Solid Structures), Moscow: Metallurgiya, 1986.

Rogachev, A.S., Exothermic reaction waves in multilayer nanofilms, Russ. Chem. Rev., 2008, vol. 77, no. 12, pp. 21–37.

Ma, E., Thompson, C.V., and Clevenger, L.A., Self-propagating explosive reactions in Al/Ni thin films, Appl. Phys. Lett., 1990, vol. 57, pp. 1262–1264.

Besnoin, E., Cerutti, S., and Knio, O.M., Effect of reactant and product melting on self-propagating reactions in multilayer foils, J. Appl. Phys., 2002, vol. 92, no. 9, pp. 5474–5481.

Swiston, A.J., Hufnagel, T., and Weihs, T.P., Joining bulk metallic glass using reactive multilayer foils, Scripta Mater., 2003, vol. 48, pp. 1575–1580.

Duckham, A., Spey, S.J., Wang, J., Reiss, M.E., Weihs, T.P., Besnoin, E., and Knio, O.M., Joining of stainless-steel specimens with nanostructured Al/Ni foils, J. Appl. Phys., 2004, vol. 96, pp. 2336–2342.

Wang, J., Besnoin, E., Knio, O.M., and Weihs, T.P., Investigating the effect of applied pressure on reactive multilayer foil joining, Acta Mater., 2004, vol. 52, pp. 5265–5274.

Cao, J., Feng, J.C., and Li, Z.R., Microstructure and fracture properties of reaction-assisted diffusion bonding of TiAl intermetallic with Al/Ni multilayer foils, J. Alloys Compd., 2008, vol. 466, pp. P. 363–367.

Swiston, Jr.A.J., Besnoin, E., Duckham, A., Knio, O.M., Weihs, T.P., and Hufnagel, T., Thermal and microstructural effects of welding metallic glasses by self-propagating reactions in multilayer foils, Acta Mater., 2005, vol. 53, pp. 3713–3719.

Lehnert, T., Tixier, S., Boni, P., and Gotthardt, R., A new fabrication process for Ni–Ti shape memory thin films, Mater. Sci. Eng., 1999, vols. A273–275, pp. 713–716.

Fu, Y., Du, H., Huang, W., and Hu, M., TiNi-based thin films in MEMS applications: a review, Sens. Actuat. A-Phys., 2004, vol. 112, pp. 395–408.

Merzhanov, A.G., Borovinskaya, I.P., Prokudina, V.K., and Nikulina, N.A., Efficiency of the SHS powders and production method, Int. J. SHS, 1994, vol. 3, no. 4, pp. 353–370.

Arzin, A.P., Voroin, V.P., Guzeev, V.V., Kirdyashkin, A.A., Maksimov, Yu.M., Rudenskii, G.E., Khorobraya, E.G., and Shul’pekov, A.M., RF Patent 55241, 2006.

Merzhanov, A.G., SHS technology, Adv. Mater., 1992, vol. 4, no. 4, pp. 294–295.

Merzhanov, A.G. and Mukas’yan, A.S., Tverdoe plamya (Solid Flame), Moscow: Torus, 2007.

Puszynski, J.A. and Degraw, A., Past and current accomplishments in production of ceramic powders and structures by self-propagating high-temperature synthesis method, Adv. Sci. Technol., 2010, vol. 63, pp. 228–235.

Borovinskaya, I.P., Gromov, A.A., Levashov, E.A., Maksimov, Yu.M., Mukasyan, A.S., and Rogachev, A.S., Concise Encyclopedia of Self-Propagating High-Temperature Synthesis: History, Theory, Technology and Products, Amsterdam, Elsevier, 2017.

Merzhanov A.G. Self-propagating high-temperature synthesis: Twenty years of research and findings, in: Combustion and Plasma Synthesis of High-Temperature Materials, New York: VCH, 1990, pp. 1–53.

Merzhanov, A.G. and Rogachev, A.S., Structural macrokinetics of SHS processes, Pure Applied Chem., 1992, vol. 64, no. 7, pp. 941–953.

Frank-Kamenetskii, D.A., Diffuziya i teploperedacha v khimicheskoi kinetike (Diffusion and Heat Transfer in Chemical Kinetics), Moscow: Nauka, 1967.

Babichev, A.P., Babushkina, N.A., Bratkovskii, A.M., et al., Fizicheskie velichiny: Spravochnik (Physical Quantities: Reference Book), Grigor’ev, S.G. and Meilikhov, E.Z., Eds., Moscow: Energoatomizdat, 1991.

Smitlz, K.J., Metally: Spravochnik (Metals: Reference), Moscow: Metallurgiya, 1980.

Chirkin, V.S., Teplofizicheskie svoistva materialov: Spravochnik (Thermal Properties of Materials), Moscow: Fizmatlit, 1959.

Shkadinskii, K.G., Khaikin, B.I., and Merzhanov, A.G., Propagation of a pulsating exothermic reaction front in the condensed phase, Fiz. Goren. Vzryv., 1971, vol. 7, no. 1, pp. 19–28.

Thông tin
Thông tin xuất bản

Allerton Press

Tập 60

426-433

Thông tin tác giả