Piezo rotary and axial vibrator (PRAV) characterization of a fresh coating during its drying

Rheologica Acta - Tập 50 - Trang 221-229 - 2011
W. Pechhold1, U. Mayer1, G. B. Raju2, O. Guillon2
1Institut für Dynamische Materialprüfung an der, Universität Ulm, Ulm, Germany
2Materials Science, Technische Universität Darmstadt, Darmstadt, Germany

Tóm tắt

Using a piezo rotary and axial vibrator (PRAV) the viscoelastic properties of a fresh Al2O3 coating that is deposited on a well-chosen plate can be measured simultaneously during drying. There are three types of vibrations available to be excited and detected in their resonance modes, by measuring resonance frequencies f k and half-widths h k, before and after coating as a function of time: axial vibration, bending vibration to get the evolving Young’s modulus and rotary vibration to follow the viscosity increase during drying of the thin coating. This information is contained in the complex frequency shifts Ωk = 2Δf k /f k + iΔh k /f k of the three vibration modes caused by the coating on the plate. A derivation of the relationships, their validation on Newtonian liquids and experimental applications carried out using the PRAV are given in the paper.

Tài liệu tham khảo

Baklouti S, Chartier T, Gault C, Baumard JF (1997) The effect of binders on the strength and Young’s modulus of dry pressed alumina. J Eur Ceram Soc 18:323–328 Berglund KD, Truong MT, Przybycien TM, Tilton RD, Walker LM (2004) Rheology of transient networks containing hydrophobically modified cellulose, anionic surfactant and colloidal silica: role of selective adsorption. Rheol Acta 43:50–61 Chiang C, Ma CM, Wu D, Kuan H (2003) Preparation, characterization, and properties of novolac-type phenolic/SiO2 hybrid organic–inorganic nanocomposite materials by sol–gel method. J Polym Sci Part A: Polym Chem 41:905–913 Crassous JJ, Regisser R, Ballauff M, Willenbacher N (2005) Characterization of the viscoelastic behaviour of complex fluids using the piezoelastic axial vibrator. J Rheol 49:851–863 Gross Th, Kirschenmann L, Pechhold W (2002) Piezoelectric Axial Vibrator (PAV)—a new oscillating squeeze flow rheometer. Proceedings Eurheo, Erlangen Irretier H (2001) Systeme mit mehreren Freiheitsgraden, kontinuierliche Systeme. Verlag Vieweg, Braunschweig Kiennemann J, Chartier T, Pagnoux C, Baumard JF, Huger M, Lamerant JM (2005) Drying mechanisms and stress development in aqueous alumina tape casting. J Eur Ceram Soc 25:1551–1564 Kirschenmann L (2003) Aufbau zweier piezoelektrischer Sonden (PRV,PAV) zur Messung der viskoelastischen Eigenschaften weicher Substanzen im Frequenzbereich 0.5 Hz–2 kHz bzw. 0.5 Hz–7 kHz. PhD Thesis, Universität Ulm Kirschenmann L, Pechhold W (2002) Piezoelectric rotary vibrator (PRV)—a new oscillating rheometer for linear viscoelasticity. Rheol Acta 41:362–368 Kornum LO (1979) Rheological characterization of coatings with regard to application and film formation. Rheol Acta 18:178–192 Kounga Njiwa AB, Aulbach E, Rödel J (2006) Mechanical properties of dry-pressed powder compacts: case study on alumina nano particles. J Am Ceram Soc 89:2641–2644 Lewis JA (2000) Colloidal processing of ceramics. J Am Ceram Soc 83:2341–2359 Lewis JA, Blackman KA, Ogden AL, Payne JA, Francis LF (1996) Rheological property and stress development during drying of tape-cast ceramic layers. J Am Ceram Soc 79:3225–3234 Luther EP, Yanez JA, Franks GV, Lange FF, Pearson DS (1995) Effect of ammonium citrate on the rheology and particle packing of alumina slurries. J Am Ceram Soc 78:1495–1500 Martinez CJ, Lewis JA (2002) Rheological, structural, and stress evolution of aqueous Al2O3:latex tape-cast layers. J Am Ceram Soc 85:2409–2416 Novak S, Olhero SMHO, Ferreira JMF, Zupancic A (2004) Rheological properties of paraffin suspensions of surface-modified alumina powder for low-pressure injection moulding. Rheol Acta 43:559–566 Pechhold W (1959) Eine Methode Zur Messung des komplexen Schubmodulus im Frequenzbereich von 1 bis 100 kHz. Acustica 9:39–48 Pechhold W (2003) Mechanische Spektroskopie an Weichen Materialien—Mechanical Spectroscopy of Soft Matters. http://www.uni-ulm.de/institute/idm/ Scherer GW (1990) Theory of drying. J Am Ceram Soc 73:3–14 Stern K (1996) Metallurgical and ceramic protective coatings. Chapmann & Hall, New York, USA Wang L, Liang C, Prorok BC (2007) A comparison of testing methods in assessing the elastic properties of sputter-deposited gold films. Thin solid films 515:7911–7918 Willenbacher N, Oelschlaeger C (2007) Dynamics and structure of complex fluids from high frequency mechanical and optical rheometry. Curr Opin Colloid Interface Sci 12:43–49