Numerical analysis of plume characteristics and liquid circulation in gas injection through a porous plug

Choeng Ryul Choi1, Chang Nyung Kim2
1Mechanical Engineering Department, Graduate School of Kyunghee University, Kihung, Yongin, Korea
2College of Mechanical & Industrial System Engineering, Kyunghee University, Korea

Tóm tắt

Từ khóa


Tài liệu tham khảo

Clift, R. and Grace, J. R. and Weber, M. E., 1978,Bubbles, Drops, and Particles, Academic Press Inc., pp. 111–112.

Cross, M., Marcatos, N. C. and Aldham, C., 1984,Control '84 Mineral Metallurgical Processing, John A. Herbst, ed., Society of Mining Eng. of the AM. Inst. of Mining, Metallurgical and Petroleum Eng. Inc., New York, NY, pp. 291–297.

Davidson, J. F. and Schüler, 1960,Trans. Inst. Chem. Eng., Vol. 38, pp. 385–342.

Debroy, T., Majumdar, A. K. and Spalding, D. B., Sept. 1978,App. Math. Modeling, Vol. 2, pp. 146–150.

Grevet, J. H., Szekely, J. and El-Kaddah, N., 1982, “An Experimental and Theoretical Study of Gas Bubble Driven Circulation Systems,”Int. J. Heat Transfer, Vol. 25, No. 4. pp. 487–497.

Johansen, S. T. and Boysan, F., 1988, “Fluid Dynamics in Bubbled Stirred Ladles, Part II: Mathematical Modeling,”Metall Trans. B, Vol. 19B, pp. 755–764.

Johansen, S. T., Robertson, D. G. C., Woje, K. and Engh, T. A., 1988, “Fluid Dynamics in Bubble Stirred Ladles, Part I: Experiments,”Metall. Trans. B, Vol. 19B, pp. 745–754.

Koh, P. L. T., Markatos, N. C. and Cross, M., 1987,PCH, PhisicoChem. Hydrodyn., Vol. 9 (1/2), pp. 197–207.

Mazumdar, D. and Guthrie, R. I. L., 1994, “An Assessment of a Two-Phase Calculation Procedure for Hydrodynamic Modeling of Submerged Gas Injection in Ladles,”ISIJ Int., Vol. 34, No. 5, pp. 384–392.

Mazumdar, D. and Guthrie, R. I. L., 1985, “Hydrodynamic Modeling of Some Gas Injection Procedures in Ladle Metallurgy Operations,”Metall. Trans. B, Vol. 16B, pp. 83–90.

Mazumdar, D., Kajani, S. K. and Ghosh, A., 1990, Steel res., Vol. 61, p. 339.

Mazumdar, D., Verma, V. and Kumar, N., 1992,Ironmaking Steelmaking. Vol. 19, p. 152

Mckelliget, J. W., Cross, M. and Gibson, R. D., 1982,Appl. Math. Mod., Vol. 6, pp. 469–480.

Neifer, M., Rodi, S. and Sucker, D., 1993, “Investigations on the Fluid Dynamic and Thermal Process Control in Ladles, Steel Res., Vol. 64, pp. 54–62

Oinglin, He, Yichuan, Pen and Tsc-Chiang, Hsiao, Sept. 1984,Proceedings of Shenyang Symposium of Injection Metallurgy, IMS, Shenyang, People's Republic of China, pp. 93–113.

Patankar, S. V. and Spalding, D. B., 1972,Int. J. Heat Mass Transfer, 15, p. 1787.

Patankar, S. V., 1980,Numerical Heat Transfer and Fluid Flow, Hemisphere, Washington D. C.

Sahai, Y. and Guthrie, R. I. L., 1982, Hydrodynamics of Gas Stirred Melts: part I. Gas/Liquid Coupling,Metall. Trans. B, Vol. 13B, pp. 193–211.

Szekely, J. and Asai, S., 1975,Trans. ISIJ, Vol. 15, p. 271.