Modeling the panel zone in steel MR frames composed of built-up columns

Krawinkler, 1987, Effect of panel zone deformations on seismic response, J Constr Steel Res, 8, 233, 10.1016/0143-974X(87)90060-5 Tsai, 1988 Kim, 1995 International Conference of Building Officials, 1997 American Institute of Steel Construction, 1997 Federal Emergency Management Agency, 2000 Krawinkler, 1971 Fielding, 1971, Shear in steel beam-to-column connections, Weld J, 50, 313s S.J. Wang. Seismic response of steel building frames with inelastic joint deformation. PhD Dissertation, Department of Civil Engineering, Lehigh University, Bethlehem, PA; 1988. Kim, 2002, Monotonic and cyclic loading models for panel zones in steel moment frames, J Constr Steel Res, 58, 605, 10.1016/S0143-974X(01)00079-7 Castro, 2005, Modelling of the panel zone in steel and composite moment frames, Eng Struct, 27, 129, 10.1016/j.engstruct.2004.09.008 Krawinkler, 1975, Shear behavior of steel frame joints, J Struct Div ASCE, 101, 2317, 10.1061/JSDEAG.0004206 E.M. Lui. Effects of connection flexibility and panel zone deformation on the behavior of panel steel frames. PhD Dissertation, Department of Civil Engineering, Purdue University, West Lafayette, IN; 1985. Lui, 1986, Frame analysis with panel zone deformation, Int J Solid Struct, 22, 1599, 10.1016/0020-7683(86)90065-X Bertero, 2002, Performance based seismic engineering: the need for a reliable conceptual comprehensive approach, Earthq Eng Struct Dyn, 31, 627, 10.1002/eqe.146 Mulas, 2004, A structural model for panel zones in non linear seismic analysis of steel moment-resisting frames, Eng Struct, 26, 363, 10.1016/j.engstruct.2003.10.009 Slutter, 1981 AISC341-05, 2005