Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloys

W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: "Friction Stir Welding Butt Welding," G.B. Patent Application No. 9125978.8, Dec. 1991

U.S. Patent No. 5460317, Oct. 1995.

K. Colligan: “Material Flow Behavior during Friction Stir Welding of Aluminum,” Weld. J., 75(7), 1999, pp. 229s-37s.

H. Larsson, L. Karlsson, S. Stoltz, and E.L. Bergqvist: “Joining of Dissimilar Al-alloys by Friction Stir Welding,” 2nd International Symposium on Friction Stir Welding, 26–28 June 2000.

T. Hashimoto, N. Nishikawa, S. Tazaki, and M. Enomoto: “Mechanical Properties of Joints for Aluminum Alloys with Friction Stir Welding Process,” in Proc. Conf. INALCO’98, 7th International Conference Joints in Aluminum, April 1998, TWI.

F. Palm: “Charakterisierung des Materialflusses beim Reibruehrschweissen (Friction Stir Welding) von Al-Werkstoffen,” in Proc. GKSS/TWI Workshop on “Friction Stir Welding”, May 1999, pp. 23–29.

P. Threadgill: “Friction Stir Welds in Aluminum Alloys—Preliminary Microstructural Assessment,” TWI Bulletin, 1997, 38(2), pp. 30–33.

C.G. Rhodes, M.W. Mahoney, and W.H. Bingel: “Effects of Friction Stir Welding on Microstructure of 7075 Aluminum,” Scr. Mater., 1997, 36(1), pp. 69–75.

E.D. Nicholas and S.W. Kallee: “Friction Stir Welding—A Decade On,” IIW Asian Pacific International Congress, Sydney, 29 October to 2 November 2000, pp. 1–12.

W.M. Thomas: “Friction Stir Welding of Ferrous Materials—a Feasibility Study,” 1st International Symposium on Friction Stir Welding, 14–16 June 1999.

L.E. Murr, G. Liu, and J.C. McClure: “A TEM Study of Precipitation and Related Microstructures in Friction-Stir-Welded 6061 Aluminum,” J. Mater. Sci., 1998, 33, pp. 1243–51.

A.P. Reynolds, W.D. Lockwood, and T.U. Seidel: “Processing-Property Correlation in Friction Stir Welds,” Mater. Sci. Forum, 2000, 331–337, pp. 1719–24.

P. Colegrove: 3-Dimensional Flow and Thermal Modeling of the Friction Stir Welding Process, 2nd International Symposium on Friction Stir Welding, 26–28 June 2000.

C.B. Smith, G.J. Bendzsak, T.H. North, J.H. Hinrichs, J.S. Noruk, and R.J. Heideman: “Heat and Material Flow Modeling of the Friction Stir Welding Process,” 2nd International Symposium on Friction Stir Welding, 26–28 June 2000.

Y. Li, L.E. Murr, and J.C. McClure: “Solid-State Flow Visualization in the Friction-Stir Welding of 2024 Al to 6061 Al,” Scr. Mater., 1999, 40(9), pp. 1041–46.

L.E. Murr, Y. Li, E.A. Trillo, R.D. Flores, and J.C. McClure: “Microstructures in Friction-Stir Welded Metals,” J. Mater. Process. Manuf. Sci., 1998, 7(10), pp. 145–61.

L.E. Murr, Y. Li, R.D. Flores, E.A. Trillo, and J.C. McClure: “Intercalation Vortices and Related Microstructural Features in the Friction-Stir-Welding of Dissimilar Metals,” Mater. Res. Innovat. 1998, 2, pp. 150–63.

Y. Li, E.A. Trillo, and L.E. Murr: Friction-Stir Welding of Aluminum Alloy 2024 to Silver, J. Mater. Sci. Lett., 2000, 19, pp. 1047–51.

L.E. Murr, R.D. Flores, O.V. Flores, J.C. McClure, G. Liu, and D. Brown: “Friction-Stir Welding: Microstructural Characterization,” Mater. Res. Innovat., 1998, 1, pp. 211–23.

L.E. Murr, Ying Li, E.A. Trillo, and J.C. McClure: “Fundamental Issues and Industrial Applications of Friction-Stir Welding,” Mater. Technol., 2000, 15(1), pp. 37–48.