Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries

Oxford University Press (OUP) - Tập 30 Số 7 - Trang 642-643 - 2001
Tsutomu Ohzuku1, Yoshinari Makimura1
1Department of Applied Chemistry, Graduate School of Engineering, Osaka City University(OCU)

Tóm tắt

Abstract Layered LiCo1/3Ni1/3Mn1/3O2 was prepared by a solid state reaction at 1000 °C in air and examined in nonaqueous lithium cells. LiCo1/3Ni1/3Mn1/3O2 showed a rechargeable capacity of 150 mAh g−1 in 3.5–4.2 V or 200 mAh g−1 in 3.5–5.0 V. Operating voltage of Li / LiCo1/3Ni1/3Mn1/3O2 was by 0.2–0.25 V lower than that of a cell with LiCoO2 or LiMn2O4 and by 0.15–0.3 V higher than that with LiNiO2 or LiCo1/2Ni1/2O2 due to a complex solid solution mechanism.

Từ khóa


Tài liệu tham khảo

10.1016/0025-5408(80)90012-4

10.1016/0167-2738(90)90049-W

10.1016/0013-4686(93)80046-3

10.1016/0022-4596(81)90323-6

10.1016/0025-5408(83)90138-1

10.1149/1.2086149

10.1016/S0378-7753(96)02573-6

10.1149/1.2048592

10.1016/S0013-4686(99)00200-5

10.1149/1.2220730

10.1149/1.2059267