Laser Cladding for Crack Repair of CMSX-4 Single-Crystalline Turbine Parts

Gäumann, M., Bezençon, C., Canalis, P., Kurz, W.: Single-crystal laser deposition of superalloys: processing-microstructure maps. Acta Mater. 49(6), 1051–1062 (2001)

Acharya, R., Bansal, R., Gambone, J. J., Das, S.: A Coupled thermal, fluid flow, and solidification model for the processing of single-crystal alloy CMSX-4 through scanning laser epitaxy for turbine engine hot-section component repair (Part I). Metallurgic. Mater. Trans. B, 45(6) (2014)

Acharya, R., Bansal, R., Gambone, J.J., Das, S.: A microstructure evolution model for the processing of single-crystal alloy CMSX-4 through scanning laser epitaxy for turbine engine hot-section component repair (Part II). Metallurgic. Mater. Trans. B, 45(6) (2014)

Liu, Z., Qi, H.: Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy. Acta Mater. (2015)

Liu, Z., Qi, H.: Numerical simulation of transport phenomena for a double-layer laser powder deposition of single-crystal superalloy. 45 (2014)

Liu, Z., Qi, H., Jiang, L.: Control of crystal orientation and continuous growth through inclination of coaxial nozzle in laser powder deposition of single-crystal superalloy. 230, 177–186 (2016)

Liu, W., DuPont, J.N.: Effects of melt-pool geometry on crystal growth and microstructure development in laser surface-melted superalloy single crystals. Acta Mater. 52(16), 4833–4847 (2004)

Liu, W., DuPont, J.N.: Effects of substrate crystallographic orientations on crystal growth and microstructure development in laser surface-melted superalloy single crystals. mathematical modeling of single-crystal growth in a melt pool (Part II). Acta Mater. 53(5), 1545–1558 (2005)

Wang, L., Wang, N., Yao, W.J., Zheng, Y.P.: Effect of substrate orientation on the columnar-to-equiaxed transition in laser surface remelted single crystal superalloys. Acta Mater. 88, 283–292 (2015)

Wang, L., Wang, N.: Effect of substrate orientation on the formation of equiaxed stray grains in laser surface remelted single crystal superalloys. Experiment. Investig. 104, 250–258 (2016)

Mokadem, S., Bezençon, C., Hauert, A., Jacot, A., Kurz, W.: Laser repair of superalloy single crystals with varying substrate orientations. Metallurgic. Mater. Trans. A: Phys. Metallur. Mater. Sci. 38 A(7), 1500–1510 (2007)

Vitek, J.M.: The effect of welding conditions on stray grain formation in single crystal welds - theoretical analysis. Acta Mater. 53(1), 53–67 (2005)

Gäumann, M., Trivedi, R., Kurz, W.: Nucleation ahead of the advancing interface in directional solidification. Mater. Sci. Eng. A 226–228, 763–769 (1997)

Hunt, J.D.: Steady state columnar and equiaxed growth of dendrites and eutectic. Mater. Sci. Eng. 65(1), 75–83 (1984)

Gäumann, M., Henry, S., Cléton, F., Wagnière, J.-D., Kurz, W.: Epitaxial laser metal forming: analysis of microstructure formation. Mater. Sci. Eng. A 271(1-2), 232–241 (1999)