Hybrid FRP-timber thin-walled Cee section columns under axial compression: Numerical modelling

Hancock, 2003, Cold-formed steel structures, J. Constr. Steel Res., 59, 473, 10.1016/S0143-974X(02)00103-7

Langseth, 1996, Static and dynamic axial crushing of square thin-walled aluminium extrusions, Int. J. Impact Eng., 18, 949, 10.1016/S0734-743X(96)00025-5

Yan, 2010, Greenhouse gas emissions in building construction: a case study of One Peking in Hong Kong, Build. Environ., 45, 949, 10.1016/j.buildenv.2009.09.014

Fernando, 2018, Hybrid fibre-reinforced polymer-timber thin-walled structural members, Adv. Struct. Eng., 21, 1409, 10.1177/1369433217739709

Min, 2016, Local buckling of hybrid FRP-timber thin-walled columns: an experimental investigation

Min, 2020, Effect of manufacturing methods on mechanical properties of hybrid FRP-timber laminates, Construct. Build. Mater.

Schafer, 2010, Computational modeling of cold-formed steel, Thin-Walled Struct., 48, 752, 10.1016/j.tws.2010.04.008

Lecce, 2006, Distortional buckling of cold-formed stainless steel sections: finite-element modeling and design, J. Struct. Eng., 132, 505, 10.1061/(ASCE)0733-9445(2006)132:4(505)

Gardner, 2004, Numerical modeling of stainless steel structural components - a consistent approach, J. Struct. Eng., 130, 1586, 10.1061/(ASCE)0733-9445(2004)130:10(1586)

Ellobody, 2005, Structural performance of cold-formed high strength stainless steel columns, J. Compos. Mater., 61, 1631

Ashraf, 2006, Finite element modelling of structural stainless steel cross-sections, Thin-Walled Struct., 44, 1048, 10.1016/j.tws.2006.10.010

Schafer, 1998, Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses, J. Constr. Steel Res., 47, 193, 10.1016/S0143-974X(98)00007-8

Carrera, 2002, Theories and finite elements for multilayered, anisotropic, composite plates and shells, Arch. Comput. Methods Eng., 9, 87, 10.1007/BF02736649

Zhang, 2009, Recent developments in finite element analysis for laminated composite plates, Compos. Struct., 88, 147, 10.1016/j.compstruct.2008.02.014

Debski, 2014, Numerical and experimental studies of compressed composite columns with complex open cross-sections, Compos. Struct., 118, 28, 10.1016/j.compstruct.2014.07.033

Gliszczynski, 2017, Progressive failure analysis of thin-walled composite columns subjected to uniaxial compression, Compos. Struct., 169, 52, 10.1016/j.compstruct.2016.10.029

Hibbitt, 2010

Barbero, 2007

Kõrgesaar, 2016, Non-linear effective properties for web-core steel sandwich panels in tension, Int. J. Mech. Sci., 115, 428, 10.1016/j.ijmecsci.2016.07.021

Hibbitt, 2010

Min, 2020, Experimental study on the behaviour of hybrid fibre reinforced polymer-timber thin-walled cee section columns, Thin Wall. Struct., 10.1016/j.tws.2020.107029

Miao, 2019, GFRP-to-timber bonded joints: adhesive selection, Int. J. Adhesion Adhes., 94, 29, 10.1016/j.ijadhadh.2019.05.007

ASTM D3039/D3039M-14, 2014

ASTM D6641/D6641M-14, 2014

ASTM D7078/D7078M-12, 2012

2015

Hashin, 1973, A fatigue failure criterion for fiber reinforced materials, J. Compos. Mater., 7, 448, 10.1177/002199837300700404

Pine, 2019

Torabizadeh, 2013, Tensile, compressive and shear properties of unidirectional glass/epoxy composites subjected to mechanical loading and low temperature services, Indian J. Eng. Mater. Sci., 20, 299

Van Vuure, 2015, Compressive properties of natural fibre composites, Mater. Lett., 149, 138, 10.1016/j.matlet.2015.01.158

Min, 2020

Fernando, 2009, CFRP strengthening of rectangular steel tubes subjected to end bearing loads: effect of adhesive properties and finite element modelling, Thin-Walled Struct., 47, 1020, 10.1016/j.tws.2008.10.008

Gilbert, 2014, Thin-walled timber structures: an investigation, Construct. Build. Mater., 73, 311, 10.1016/j.conbuildmat.2014.09.070

Bensadoun, 2017, Interlaminar fracture toughness of flax-epoxy composites, J. Reinforc. Plast. Compos., 36, 121, 10.1177/0731684416672925

Boutar, 2017

Stanzl-Tschegg, 2009, Fracture behaviour of wood and its composites. A review, Holzforschung, 63, 139, 10.1515/HF.2009.012

Jones, 1998

Hashin, 1980, Failure criteria for unidirectional fiber composites, J. Appl. Mech., 47, 329, 10.1115/1.3153664

Bažant, 1983, Crack band theory for fracture of concrete, Matériaux et construction, 16, 155, 10.1007/BF02486267

Lapczyk, 2007, Progressive damage modeling in fiber-reinforced materials, Compos. Part A Appl. Sci. Manuf., 38, 2333, 10.1016/j.compositesa.2007.01.017

Duvant, 2012

Hibbitt, 2003

Matzenmiller, 1995, A constitutive model for anisotropic damage in fiber-composites, Mech. Mater., 20, 125, 10.1016/0167-6636(94)00053-0

Camanho, 2002, 1