Hot-cracking susceptibility and shear fracture behavior of dissimilar Ti6Al4V/AA6060 alloys in pulsed Nd:YAG laser welding

Jiang, 2019, Research on interfacial layer of laser welded aluminium to titanium, Mater Charact, 154, 264, 10.1016/j.matchar.2019.06.012 Wang, 2019, Microstructure and mechanical properties of Ti/Al dissimilar joints produced by laser-MIG welding-brazing, Int J Mod Phys B, 33, 1940030, 10.1142/S0217979219400307 Plaine, 2017, Microstructure and mechanical behaviour of friction spot welded AA6181-T4/Ti6Al4V dissimilar joints, Int J Adv Manuf Tech, 92, 3703, 10.1007/s00170-017-0439-2 Karpov, 2016, Layer structure of a refractory multilayer Ti/Al composite after pressure diffusion welding, Met Sci Heat Treat, 58, 3, 10.1007/s11041-016-9955-1 Tomashchuk, 2015, Dissimilar laser welding of AISI 316L stainless steel to Ti6–Al4–6V alloy via pure vanadium interlayer, Mater Sci Eng A, 622, 37, 10.1016/j.msea.2014.10.084 Kar, 2018, Influence of beam oscillation in electron beam welding of Ti-6AL-4V, Int J Adv Manuf Technol, 94, 4531, 10.1007/s00170-017-1169-1 Yan, 2019, Porosity formation and its effect on the properties of hybrid laser welded Al alloy joints, Int J Adv Manuf Tech, 104, 2645, 10.1007/s00170-019-04106-1 Tomashchuk, 2015, Direct keyhole laser welding of aluminium alloy AA5754 to titanium alloy Ti6Al4V, J Mater Process Tech, 217, 96, 10.1016/j.jmatprotec.2014.10.025 Xue, 2019, Interfacial characteristics of dissimilar Ti6Al4V/AA6060 lap joint by Pulsed Nd:YAG Laser welding, Metals, 9, 71, 10.3390/met9010071 Chen, 2016, Laser penetration welding of an overlap titanium-on-aluminium configuration, Int J Adv Manuf Tech, 87, 3069, 10.1007/s00170-016-8732-z Samavatian, 2014, An investigation on microstructure evolution and mechanical properties during liquid state diffusion bonding of Al2024 to Ti-6Al-4V, Mater Charact, 98, 113, 10.1016/j.matchar.2014.10.018 Lei, 2019, Microstructure and mechanical properties of welding brazing of Ti/Al butt joints with laser melting deposition layer additive, J Manuf Process, 38, 411, 10.1016/j.jmapro.2019.01.040 Liu, 2018, Brazing of C/C composite and Ti-6Al-4V with graphene strengthened AgCuTi filler: effects of graphene on wettability, microstructure and mechanical properties, Chin J Aeronaut, 31, 1602, 10.1016/j.cja.2017.08.017 Safeen, 2020, Effect of position and force tool control in friction stir welding of dissimilar aluminum-steel lap joints for automotive applications, Adv Manuf, 8, 59, 10.1007/s40436-019-00290-1 Choi, 2018, Dissimilar friction stir welding of pure Ti and pure Al, Mat Sci Eng A-Struct, 730, 168, 10.1016/j.msea.2018.05.117 Hekmatjou, 2018, Hot cracking in pulsed Nd: YAG laser welding of AA5456, Opt Laser Technol, 103, 22, 10.1016/j.optlastec.2018.01.020 Torkamany, 2014, Dissimilar pulsed Nd: YAG laser welding of pure niobium to Ti-6Al-4V, Mater Des, 53, 915, 10.1016/j.matdes.2013.07.094 Zhou, 2018, Cracking in dissimilar laser welding of tantalum to molybdenum, Opt Laser Technol, 102, 54, 10.1016/j.optlastec.2017.12.026 Lv, 2012, Investigation on TIG arc welding-brazing of Ti/Al dissimilar alloys with Al based fillers, Sci Technol Weld Joi, 17, 519, 10.1179/1362171812Y.0000000041 Majumdr, 1997, Formation of a crack-free joint between Ti alloy and Al alloy by using a high-power CO2 laser, J Mater Sci, 32, 6191, 10.1023/A:1018620723793 Song, 2021, Influence of welding parameters on microstructure and mechanical properties of electron beam welded Ti60 to GH3128 joint with a Cu interlayer, Chin J Aeronaut, 34, 39, 10.1016/j.cja.2020.08.016 Cao, 2003, Research and progress in laser welding of wrought aluminium alloys. II. Metallurgical microstructures, defects, and mechanical properties, Mater Manuf Process, 18, 23, 10.1081/AMP-120017587 Campanelli, 2013, Analysis and comparison of friction stir welding and laser assisted friction stir welding of aluminium alloy, Materials, 6, 5923, 10.3390/ma6125923 Zhang, 2016, Investigation on the effects of parameters on hot cracking and tensile shear strength of overlap joint in laser welding dissimilar Al all-oys, Int J Adv Manuf Tech, 86, 2895, 10.1007/s00170-016-8383-0 Cicală, 2005, Hot cracking in Al-Mg-Si alloy laser welding-operating parameters and their effects, Mat Sci Eng A Struct, 395, 1, 10.1016/j.msea.2004.11.026 Beiranvand, 2019, An analytical model for prediction of solidification cracking susceptibility in aluminium alloys taking into account the effect of solidification rate, Metall Mater Trans A, 50A, 2835, 10.1007/s11661-019-05171-7 Radel, 2019, Reduction of hot cracking susceptibility during laser welding of aluminium by vibrations, Weld World, 63, 599, 10.1007/s40194-018-00680-2 Abbaschian, 2003, Cracking susceptibility of aluminium alloys during laser welding, J Mater Res, 6, 273, 10.1590/S1516-14392003000200024 Vaidya, 2010, Improving interfacial properties of a laser beam welded dissimilar joint of aluminum AA6056 and titanium Ti6Al4V for aeronautical applications, J Mater Sci, 45, 6242, 10.1007/s10853-010-4719-6 Zhang, 2018, Influence of welding parameters on the IMCs and the mechanical properties of Ti/Al butt joints welded by MIG/TIG double-sided arc welding-brazing, J Alloy Compd, 747, 764, 10.1016/j.jallcom.2018.03.119 Duley, 1998 Zhu, 2019, Effect of laser-arc offset and laser-deviation angle on the control of a Ti-Al interlayer, J Mater Process Technol, 271, 336, 10.1016/j.jmatprotec.2019.04.010