Experimental study of consistency degradation of different greases in mixed neutron and gamma radiation

Heliyon - Tập 5 - Trang e02489 - 2019
Matteo Ferrari1,2, Aldo Zenoni1,2, Monika Hartl3, Yongjoong Lee3, Alberto Andrighetto4, Alberto Monetti4, Andrea Salvini5, Fabio Zelaschi5
1Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di Brescia, Via Branze 38, I-25123 Brescia, Italy
2Istituto Nazionale di Fisica Nucleare, Via Bassi 6, I-27100 Pavia, Italy
3European Spallation Source, Odarslövsvägen 113 SE-22484 Lund, Sweden
4Laboratori Nazionali di Legnaro dell'INFN, Viale dell'Università 2, I-35020 Legnaro, PD, Italy
5Laboratorio Energia Nucleare Applicata LENA, Università degli Studi di Pavia, Via Aselli 41, I-27100 Pavia, Italy

Tài liệu tham khảo

Bolt, 1963

Davenas, 2002, Stability of polymers under ionising radiation: the many faces of radiation interactions with polymers, Nucl. Instrum. Methods Phys. Res. B, 191, 653, 10.1016/S0168-583X(02)00628-6

Seguchi, 1985, Fast neutron irradiation effect – II. Crosslinking of polyethylene, ethylene-propylene copolymer, and tetrafluoroethylene-propylene copolymer, Phys. Chem., 26, 221

Aberg, 2013

Andrighetto, 2018, Spes: an intense source of neutron-rich radioactive beams at Legnaro, J. Phys. Conf. Ser., 966, 10.1088/1742-6596/966/1/012028

Monetti, 2015, The RIB production target for the SPES project, Eur. Phys. J. A, 51, 128, 10.1140/epja/i2015-15128-6

Beynel, 1982

Obara, 1999

Saito, 2016, Development of radiation hard components for ITER blanket remote handling system, Fusion Eng. Des., 109–111, 1502, 10.1016/j.fusengdes.2015.11.042

Shul'zhenko, 1981, Effect of low-power ionizing radiation on properties of lubricating greases, Chem. Technol. Fuels Oils, 17, 217, 10.1007/BF00730590

Rice, 1959

Hanish, 1987, Effects of radiation types and dose rates on selected cable-insulating materials, Radiat. Phys. Chem., 30, 1

Rivaton, 2005, Radiochemical ageing of EPDM elastomers. Identification and quantification of chemical changes in EPDM and EPR films γ-irradiated under oxygen atmosphere, Nucl. Instrum. Methods Phys. Res. B, 227, 343, 10.1016/j.nimb.2004.09.008

Bruce, 1981

Schoenbacher, 1989

Phillips, 1978, The effects of radiation on electrical insulators in fusion reactors

Bopp, 1981

Briskman, 2007, Specificity of proton irradiation effects on polymers, Nucl. Instrum. Methods Phys. Res. B, 265, 72, 10.1016/j.nimb.2007.08.028

Rivaton, 2008, Structural modifications of polymers under the impact of fast neutrons, Polym. Degrad. Stab., 93, 1864, 10.1016/j.polymdegradstab.2008.07.015

Bonin, 1995, Effects of neutrons and gamma radiation on high polymer epoxy adhesives

Zenoni, 2017, Radiation resistance of elastomeric O-rings in mixed neutron and gamma fields: testing methodology and experimental results, Rev. Sci. Instrum., 88, 10.1063/1.5011035

Battini, 2018, Experimental testing and numerical simulations for life prediction of gate valve O-rings exposed to mixed neutron and gamma fields, Mater. Des., 156, 514, 10.1016/j.matdes.2018.07.020

Ferrari, 2018, The SPES facility as an intense neutron source: radiation resistance of polymeric materials and residual activation calculations, Radiat. Appl., 3, 98

Mortier, 2010, 411

Lamarsch, 1966

2015

2011

Chiesa, 2013

Ambrožič, 2017, Computational analysis of the dose rates at JSI TRIGA reactor irradiation facilities, Appl. Radiat. Isot., 130, 140, 10.1016/j.apradiso.2017.09.022

Attix, 2004

Thông tin
Thông tin xuất bản

Heliyon

Tập 5

e02489

Thông tin tác giả