Enhanced adhesion effect of epoxy resin on carbon fiber-reinforced Poly(etheretherketone) via surface initiated photopolymerization of glycidyl methacrylate

Forintos, 2019, Multifunctional application of carbon fiber reinforced polymer composites: electrical properties of the reinforcing carbon fibers - a short review, Composites Part B, 162, 331, 10.1016/j.compositesb.2018.10.098 Kobayashi, 2016, Interphase structure of carbon fiber reinforced polyamide 6 revealed by microbeam X-ray diffraction with synchrotron radiation, Polymer, 89, 154, 10.1016/j.polymer.2016.02.057 Kobayashi, 2016, Interphase crystal structure of polyamide 6 on carbon materials revealed by grazing incidence X-ray diffraction with synchrotron radiation, Polymer, 97, 174, 10.1016/j.polymer.2016.05.028 Monich, 2016, Mechanical and biological behavior of biomedical PEEK matrix composites: a focused review, Mater. Lett., 185, 593, 10.1016/j.matlet.2016.09.005 Godara, 2007, The influence of sterilization processes on the micromechanical properties of carbon fiber-reinforced PEEK composites for bone implant applications, Acta Biomater., 3, 209, 10.1016/j.actbio.2006.11.005 Koh, 2019, Total knee arthroplasty application of polyetheretherketone and carbon-fiber-reinforced polyetheretherketone: a review, Mater. Sci. Eng. C, 100, 70, 10.1016/j.msec.2019.02.082 Soutis, 2005, Carbon fiber reinforced plastics in aircraft construction, Mater. Sci. Eng. A, 412, 171, 10.1016/j.msea.2005.08.064 Giancaterina, 2001, Elaboration and adhesion of zinc oxide coating on poly-ether-ether-ketone films, Surf. Coating. Technol., 138, 84, 10.1016/S0257-8972(00)01151-8 Kodokian, 1988, Surface pretreatment and adhesion of thermoplastic fibre-composites, J. Mater. Sci. Lett., 7, 625, 10.1007/BF01730315 Jin, 2015, Synthesis and application of epoxy resins: a review, J. Ind. Eng. Chem., 29, 1, 10.1016/j.jiec.2015.03.026 Arrowsmith, 1970, Adhesion of electroformed copper and nickel to plastic laminates, Trans. Inst. Met. Finish., 48, 88, 10.1080/00202967.1970.11870136 Kim, 2018, Adhesion enhancement and damage protection for carbon fiber-reinforced polymer (CFRP) composites via silica particle coating, Compos. Part A Appl. Sci. Manuf., 109, 105, 10.1016/j.compositesa.2018.02.042 Hallmann, 2012, The improvement of adhesive properties of PEEK through different pre-treatments, Appl. Surf. Sci., 258, 7213, 10.1016/j.apsusc.2012.04.040 Zhang, 2020, Enhanced adhesion effect of epoxy resin on metal surfaces using polymer with catechol and epoxy groups, ACS Appl. Polym. Mater., 2, 1500, 10.1021/acsapm.9b01179 Barba, 2020, Temperature and strain rate dependences on hardening and softening behaviors in semi-crystalline polymers: application to PEEK, Int. J. Solid Struct., 182–183, 205, 10.1016/j.ijsolstr.2019.08.021 Nguyen, 1987, Poly(aryl-ether-ether-ketone) and its advanced composites: a review, Polym. Compos., 8, 57, 10.1002/pc.750080202 Zhang, 2020, Adhesion enhancement of poly(etheretherketone) via surface-initiated photopolymerization of glycidyl methacrylate, Polymer, 209, 122971, 10.1016/j.polymer.2020.122971 Chouwatat, 2017, Aqueous lubrication of poly(etheretherketone) via surface-initiated polymerization of electrolyte monomers, Polymer, 116, 549, 10.1016/j.polymer.2017.02.085 Buhl, 2015, Immobilization of enzymes via microcontact printing and thiol-ene click chemistry, Bioconjugate Chem., 26, 1017, 10.1021/acs.bioconjchem.5b00282 de Boer, 2000, “Living” free radical photopolymerization initiated from surface-grafted iniferter monolayers, Macromolecules, 33, 349, 10.1021/ma9910944 Hofmann, 2017, Mode I delamination onset in carbon fibre reinforced SiC: double cantilever beam testing and cohesive zone modelling, Eng. Fract. Mech., 182, 506, 10.1016/j.engfracmech.2017.05.018 Jama, 1992, Treatment of poly(ether ether ketone) (PEEK) surfaces by remote plasma discharge. XPS investigation of the ageing of plasma-treated PEEK, Surf. Interface Anal., 18, 751, 10.1002/sia.740181103 Li, 1999, Strong interaction at interface of carbon fiber reinforced aromatic semicrystalline thermoplastics, Polymer, 40, 4307, 10.1016/S0032-3861(98)00658-2 Barbey, 2013, Postpolymerization modification of poly(glycidyl methacrylate) brushes: an XPS depth-profiling study, Macromolecules, 46, 6151, 10.1021/ma400819a Simonin, 2000, Characterization of flame-sprayed PEEK coatings by FTIR-ATR, DSC and acoustic microscopy, Macromol. Mater. Eng., 283, 153, 10.1002/1439-2054(20001101)283:1<153::AID-MAME153>3.0.CO;2-# Patel, 2010, Valence band XPS and FT-IR evaluation of thermal degradation of HVAF thermally sprayed PEEK coatings, Polym. Degrad. Stabil., 95, 792, 10.1016/j.polymdegradstab.2010.02.001 Dong, 2009, Modification of polysulfone membranes via surface-initiated atom transfer radical polymerization, Appl. Surf. Sci., 255, 8860, 10.1016/j.apsusc.2009.06.075 Shard, 1992, Surface oxidation of polyethylene, polystyrene, and PEEK: the synthon approach, Macromolecules, 25, 2053, 10.1021/ma00033a034 Myllari, 2014, The effects of UV irradiation to polyetheretherketone fibres-characterization by different techniques, Polym. Degrad. Stabil., 109, 278, 10.1016/j.polymdegradstab.2014.08.003 Kyomoto, 2013, Poly(ether-ether-ketone) orthopedic bearing surface modified by self-initiated surface grafting of poly(2-methacryloyloxyethyl phosphorylcholine), Biomaterials, 34, 7829, 10.1016/j.biomaterials.2013.07.023 Ishii, 1999, Evaluation of the fatigue strength of adhesively bonded CFRP/metal single and single-step double-lap joints, Compos. Sci. Technol., 59, 1675, 10.1016/S0266-3538(99)00028-7 Chang, 2001, Studies on the stress distribution and fatigue behavior of weld-bonded lap shear joints, J. Mater. Process. Technol., 108, 307, 10.1016/S0924-0136(00)00842-6 Pashley, 1995, Adhesion testing of dentin bonding agents: a review, Dent. Mater., 11, 117, 10.1016/0109-5641(95)80046-8 Xu, 2018, A simple method for determining the mode I interlaminar fracture toughness of composite without measuring the growing crack length, Eng. Fract. Mech., 191, 476, 10.1016/j.engfracmech.2018.01.014 Quade, 2019, The effect of thin film adhesives on mode I interlaminar fracture toughness in carbon fiber composites with shape memory alloy inserts, Eng. Fract. Mech., 206, 131, 10.1016/j.engfracmech.2018.11.040 Kyomoto, 2010, Self-initiated surface grafting with poly(2-methacryloyloxyethyl phosphorylcholine) on poly(ether-ether-ketone), Biomaterials, 31, 1017, 10.1016/j.biomaterials.2009.10.055 Luo, 2002, Surface-initiated photopolymerization of poly(ethylene glycol) methyl ether methacrylate on a diethyldithiocarbamate-mediated polymer substrate, Macromolecules, 35, 2487, 10.1021/ma011487e