Electrochemical corrosion behavior of a non-vascular, bi-stent combination, surgical esophageal nitinol stent in phosphate-buffered saline solution

Park, 2014, Silicone-coating of nitinol stent wires by electrospinning: catheter deployment test, Dig. J. Nanomater. Biostruct., 9, 1 Sengupta, 2015, The present and future of non-vascular stents, 7, 58 Lee, 2012, Gemcitabine-releasing polymeric films for covered self-expandable metallic stent in treatment of gastrointestinal cancer, Int. J. Pharm., 427, 276, 10.1016/j.ijpharm.2012.02.016 Andreasen, 1971, An evaluation of 55 cobalt substituted nitinol wire for use in orthodontics, J. Am. Dent. Assoc., 82, 1373, 10.14219/jada.archive.1971.0209 Shabalovskaya, 2008, Critical overview of nitinol surface and their modifications for medical applications, Acta Biomater., 4, 447, 10.1016/j.actbio.2008.01.013 Shabalovskaya, 2002, Surface, corrosion, and biocompatibility aspects of nitinol as an implant material, Bio-Med. Mater. Eng., 12, 69 Shabalovskaya, 2001, Physicochemical and biological aspects of nitinol as a biomaterial, Int. Mater. Rev., 46, 1, 10.1179/095066001771048745 Poncet, 2000, 441 Mercier, 1980, Single-crystal elastic constants of the equiatomic NiTi alloy near the martensitic transformation, J. Appl. Phys., 51, 1833, 10.1063/1.327750 Van Humbeeck, 1998, 149 Cheng, 2007, An electrochemical study of the crevice corrosion resistance of NiTi in Hanks' solution, J. Alloys Compd., 437, 322, 10.1016/j.jallcom.2006.07.127 Figueria, 2009, Corrosion behaviour of NiTi alloy, Electrochim. Acta, 54, 921, 10.1016/j.electacta.2008.08.001 Villermaux, 1996, Corrosion resistance improvement of NiTi osteosynthesis stapes by plasma polymerized tetrafluroethylene coating, Biomed. Mater. Eng., 6, 241 Rondelli, 2006, In vitro corrosion study by EIS of an equiatomic NiTi alloy and an implant quality AISI 316 stainless steel, J. Biomed. Mater. Res. Part B, 79B, 320, 10.1002/jbm.b.30545 Geeta, 2001, Effect of thermomechanical processing on microstructure of Ti-13Nb-13Zr alloy, J. Alloys Compd., 329, 264, 10.1016/S0925-8388(01)01604-8 Gong, 2009, Fatigue to fracture: an informative, fast, and reliable approach for assessing medical implant durability, J. ASTM Int., 6, 1, 10.1520/JAI102412 Rey, 2014, An original architecture NiTi silicone rubber structure for biomedical applications, Mater. Sci. Eng. C, 45, 184, 10.1016/j.msec.2014.08.062 Kuraishi, 2009, Development of nanofiber-covered stents using electrospinning: in vitro and acute phase in vivo experiments, J Biomed Mater Res B Appl Biomater, 88B, 230, 10.1002/jbm.b.31173 Sojitra, 2009, Surface enhancement and characterization of L-605 cobalt alloy cardiovascular stent by novel electrochemical treatment, Trends Biomater. Artif. Organs, 23, 55 Verschuur, 2006, A new esophageal stent design (Niti-S stent) for the prevention of migration: a prospective study in 42 patients, Gastrointest. Endosc., 63, 134, 10.1016/j.gie.2005.07.051 Verschuur, 2008, New design esophageal stents for the palliation of dysphagia from esophageal or gastric cardia cancer: a randomized trial, Am. J. Gastroenterol., 103, 304, 10.1111/j.1572-0241.2007.01542.x Battersby, 2012, Outcomes following oesophageal stent insertion for palliation of malignant structures: a large single centre series, Eur. J. Surg. Oncol., 105, 60, 10.1002/jso.22059 Trepanier, 1997, Improvement of the corrosion resistance of NiTi stents by surface treatments, Mater. Res. Symp. Proc., 459, 363, 10.1557/PROC-459-363 Trigwell, 1997, 387 Chan, 1990, Oxidation of a NiTi alloy, Surf. Interface Anal., 15, 349, 10.1002/sia.740150602 Lausmaa, 1986, Chemical composition and morphology of titanium surface oxides, Mater. Res. Soc. Symp. Proc., 55, 351, 10.1557/PROC-55-351 O'Brien, 2002, Passivation of nitinol wire for vascular implants-a demonstration of the benefits, Biomaterials, 23, 1739, 10.1016/S0142-9612(01)00299-X Jones, 1996, 76, 168 Trépanier, 2006, R. Grishaber, 265 Kim, 2011, Effect of cobalt on the corrosion resistance of low alloy steel in sulphuric acid solution, Corros. Sci., 53, 3576, 10.1016/j.corsci.2011.07.001 Nam, 2010, Effect of niobium on the corrosion behaviour of low alloy steel in sulphuric acid solution, Corros. Sci., 53, 3377, 10.1016/j.corsci.2010.06.010 González, 1999, Study of the corrosion behaviour of titanium and some of its alloy for biomedical and dental implant applications, J. Electroanal. Chem., 471, 109, 10.1016/S0022-0728(99)00260-0 Costa, 2003, Evaluation of the corrosion resistance of ear piercing studs in a culture medium by electrochemical impedance spectroscopy, J. Electroanal. Chem., 544, 113, 10.1016/S0022-0728(03)00084-6 Assis, 2006, Corrosion characterization of titanium alloys by electrochemical techniques, Electrochim. Acta, 51, 1815, 10.1016/j.electacta.2005.02.121 Li, 2011, Benzyltrimethlammonium iodide as a corrosion inhibitor for steel in phosphoric acid produced by dehydrate wet method process, Corros. Sci., 53, 664, 10.1016/j.corsci.2010.10.013 Deluccia, 1988, 17 Razzini, 1997, Photoelectrochemcial imaging of hydrogen-induced damage in stainless steel, Corros. Sci., 39, 613, 10.1016/S0010-938X(96)00035-2 Gray, 1972, Ion and laser microprobes applied to measurement of corrosion produced hydrogen in a microscopic scale, Corrosion, 18, 47, 10.5006/0010-9312-28.2.47 Takahashi, 2010, The first direct observation of hydrogen trapping sites in TiC precipitation-hardening steel through atom probe tomography, Scr. Mater., 63, 261, 10.1016/j.scriptamat.2010.03.012 Yang, 1999, Effect of hydrogen on passive film and corrosion of AISI 310 stainless steel, Corros. Sci., 41, 741, 10.1016/S0010-938X(98)00147-4 Qiao, 1998, Hydrogne-facilitated anodic dissolution of austenitic stainless steels, Corrosion, 54, 281, 10.5006/1.3284854 Hasegawa, 1980, Anomalous corrosion of austenitic stainless steel exposed at high temperature and pressure, Corrosion, 36, 67, 10.5006/0010-9312-36.2.67 Seys, 1974, Analysis of the influence of hydrogen on pitting corrosion and stress corrosion of austenitic stainless steel in chloride environment, Corrosion, 30, 47, 10.5006/0010-9312-30.2.47 Hasegawa, 1983, Anomalous corrosion of hydrogen-containing ferritic steels in aqueous acid solution, Corrosion, 39, 115, 10.5006/1.3580826 Yang, 1998, Critical hydrogen charging condition for martensite transformation in type 304 stainless steel and surface cracking, Corrosion, 54, 628, 10.5006/1.3287639 Yashiro, 1998, The effect of permeated hydrogen on the pitting of type 304 stainless steel, Corros. Sci., 40, 781, 10.1016/S0010-938X(97)00178-9 Yang, 2000, The hydrogen-enhanced effects of chloride ions on the passivity of type 304 stainless steel, Electrochim. Acta, 45, 3927, 10.1016/S0013-4686(00)00492-8 Staehle, 1970, Effect of alloy composition on stress corrosion cracking of Fe-Cr-Ni base alloys, Corrosion, 26, 451, 10.5006/0010-9312-26.11.451