Effect of reactive compatibilizers and impact modifier on the performance characteristics of polycarbonate/poly(acrylonitrile-butadiene-styrene) blends obtained from E-waste

Freegard K, Tan G, Morton R (2006) Development of a process to separate brominated flame retardants from WEEE polymers. The Waste & Resources Action Programme ISBN: 1-84405-315-6

Brennan LB, Isaac DH, Arnold JC (2002) Recycling of acrylonitrile–butadiene–styrene and high impact polystyrene from waste computer equipment. J Appl Polym Sci 86:572

Cui J, Forssberg E (2003) Mechanical recycling of waste electric and electronic equipment: a review. J Hazard Mater 99:243

Matsuto T, Jung CH, Tanaka N (2004) Material and heavy metal balance in a recycling facility for homee electrical appliances. Waste Manag 24:425

Bai X, Isaac DH, Smith K (2007) Reprocessing acrylonitrile–butadiene–styrene plastics: structure–property relationships. Polym Eng Sci 47:120

Liang R, Gupta RK (2000) Rheological and mechanical properties of recycled polycarbonate. ANTEC: Soc Plast Eng 46:2903

Liang R, Gupta RK (2000) Rheological properties of recycled polycarbonate and ABS melts. Proc XIIIth Int Congr Rheol 1:216

Vilaplana F, Karlsson S (2008) Quality concepts for the improved use of recycled polymeric materials: a review. Macromol Mater Eng 293:274

Fathi E, Liye Z, Run F, Hangquan L (2004) Recycling of polycarbonate by blending with maleic anhydride grafted ABS. Polymer 45:6719

Balakrishnan S, Neelakantan NR, Saheb ND, Jyoti PJ (1998) Rheological and morphological behaviour of blends of polycarbonate with unmodified and maleic anhydride grafted ABS. Polymer 39:5765

Balakrishnan S, Neelakantan NR (1999) Blends of polycarbonate with unmodified and maleic anhydride grafted ABS: fracture mechanics. J Mater Sci 34:5181

Paul DR, Barlow JW (1980) Polymer blens. J Macromol Sci C Polym Rev 18:109

Nelson TJ, Subramanian N (1993) Mechanical properties of blends of nylon with chemically modified ABS. Polym Int 32:343

Nelson TJ, Subramanian N (1993) Mechanical properties of blends of nylon with chemically modified ABS. Polym Int 32:343

Kalfoglou NK, Skafidas DS, Kallitsis JK (1996) Blends of poly(ethylene terephthalate) with unmodified and maleic anhydride grafted acrylonitrile-butadiene-styrene terpolymer. Polymer 37:3387

Liu X, Bertilsson H (1999) Recycling of ABS and ABS/PC blends. J Appl Polym Sci 74:510

Sohelia L, Azar AA, Somayeh L, Somayyeh MG (2010) Properties of waste-poly(ethylene terephthalate)/acrylonitrile butadiene styrene blends compatibilized with maleated acrylonitrile butadiene styrene. J Vinyl Addit Technol 52:1801

Mani R, Bhattacharya M, Tang J (1999) Functionalization of polyesters with maleic anhydride by reactive extrusion. J Polym Sci A Polym Chem 37:1693

Tserki V, Matzinos P, Panayiotou C (2006) Novel bio - degradable composites based on treated lignocellulosic waste flour as filler. Part II. Development of bio -degradable composites using treated and compatibilized waste flour. Compos A: Appl Sci Manuf 37:1231

Rongrong Q, Junling Q, Chixing Z (2003) Modification of acrylonitrile butadiene styrene terpolymer by grafting with maleic anhydride in the melt. I. Preparation and characterization. J Appl Polym Sci 90:1249

Kim HS, Lee BH, Choi SW, Kim S, Kim HJ (2007) The effect of types of maleic anhydridegrafted poly - propylene (MAPP) on the interfacial adhesion properties of bio-flour-filled polypropylene composites. Compos A: Appl Sci Manuf 38:1473

Qi RR, Qian JL, Zhou CX (2004) Modification of acrylonitrile butadiene styrene terpolymer by grafting with maleic anhydride in the melt. I. Properties and characterization. J Appl Polym Sci 91:1249

Qi RR, Qian JL, Chen ZF, Jin X, Zhou CX (2004) Modification of acrylonitrile butadiene styrene terpolymer by grafting with maleic anhydride in the melt. II. Properties and phase behavior. J Appl Polym Sci 91:2834

Tarantili PA, Mitsakaki AN, Petoussi MA (2010) Processing and properties of engineering plastics recycled from waste electrical and electronic equipment (WEEE). Polym Degrad Stab 95:405

Marianella H, Orlando S, Carmen A, Miren I, Jeanette G (2007) Impact properties of polypropylene/styrene-butadiene-styrene block copolymer blends. Acta Microsc 16:1

Zong R, Hu Y, Wang S, Song L (2004) Thermogravimetric evaluation of PC/ABS/montmorillonite nanocomposites. Polym Degrad Stab 83:423

Jiménez A, Torre L, Kenny JM (2001) Thermal degradation of poly(vinyl chloride) plastisols based on low-migration polymeric plasticizers. Polym Degrad Stab 73:447

Navarro R, Torre L, Kenny JM, Jiménez A (2003) Thermal degradation of recycled polypropylene toughened with elastomer. Polym Degrad Stab 82:279

Hanfang Z, Ping W, Pingkai J, Genlin W (2007) Thermal degradation behaviors and flame retardancy of PC/ABS with novel silicon-containing flame retardant. Fire Mater 31:411

Haiyun M, Zhongbin X, Lifang T, Aiguan G, Zhengping F (2006) Studies of ABS-graft-maleic anhydride/clay nanocomposites: morphologies, thermal stability and flammability properties. Polym Degrad Stab 91:2951

Santana OO, Mascpoch MLI, Martinez AB (1998) Polycarbonate/acrylonitrile–butadiene–styrene blends: miscibility and interfacial adhesion. Polym Bull 41:721

Greco R, Iavarone M (2000) Influence of low molecular weight ABS species on properties of PC/ABS systems. Polym Eng Sci 40:1701

Marie LB, Olivier M, Matthieu P, Eric L (2011) Recycling of aged ABS from real WEEE through ABS/PC blends in the ABS-rich compositions. Adv Polym Technol 00:1

Rafael B, Juan L, David G, Salvador DM (2005) Recycling of ABS and PC from electrical and electronic waste. Effect of miscibility and previous degradation on final performance of industrial blends. Eur Polym J 41:2150