EV fast charging stations and energy storage technologies: A real implementation in the smart micro grid paradigm

Boulanger, 2011, Vehicle electrification: status and issues, Proc. IEEE, 99, 1116, 10.1109/JPROC.2011.2112750

Clement-Nyns, 2010, The impact of charging plug-in hybrid electric vehicles on a residential distribution grid, IEEE Trans. Power Syst., 25, 371, 10.1109/TPWRS.2009.2036481

Fernández, 2011, Assessment of the impact of plug-in electric vehicles on distribution networks, IEEE Trans. Power Syst., 26, 206, 10.1109/TPWRS.2010.2049133

Han, 2010, Development of an optimal vehicle-to-grid aggregator for frequency regulation, IEEE Trans. Smart Grid, 1, 65, 10.1109/TSG.2010.2045163

Brenna, 2012, Challenges in energy systems for the smart-cities of the future

Di Giorgio, 2012, Optimal electric vehicles to grid power control for active demand services in distribution grids

Falvo, 2013, Technologies for Smart Grids: a brief review

Brenna, 2012, Sustainable Energy Microsystem (SEM): preliminary energy analysis

Biagi, 2010, Location assisted routing techniques for power line communication in smart grids

Atzeni, 2013, Demand-side management via distributed energy generation and storage optimization, IEEE Trans. Smart Grid, 4, 866, 10.1109/TSG.2012.2206060

Cervone, 2012, A fast and accurate battery model suitable for production profiling in smart grids

Falvo, 2013, Microsystems for a sustainable energy smart grid, J. Smart Innov. Syst. Technol., 19, 259, 10.1007/978-3-642-35467-0_26

Etezadi-Amoli, 2010, Rapid-charge electric-vehicle station, IEEE Trans. Power Deliv., 25

Hoimoja, 2012, An ultrafast EV charging station demonstrator, 1390

Aggeler, 2010, Ultra-fast DC-charge infrastructures for EV mobility and future smart grids. Innovative, 1

Sanzhong, 2010, Optimum design of an EV/PHEV charging station with DC bus and storage system, 1178

Falvo, 2013, D-STATCOM with energy storage system for application in smart micro-grids

Arboleya, 2013, ZERO network-impact buildings and smart storage systems in micro-grids

Falvo, 2013, A flexible customer power device for energy management in a real smart micro-grid

European Automobile Manufacturers’ Association, Position and Recommendations for the standardisation of the charging of electrically chargeable vehicles, ACEA position paper, 14 September 2011, Brussels, p. 8.

European Commission, Standardisation mandate to CEN, CENELEC and ETSI concerning the charging of electric vehicles (M/468), Enterprise and Industry Directorate-General, 4 June 2010, Brussels, p. 4.

European Engineering Industries Association, Integrating e-vehicles into modern infrastructures, Orgalime position paper, 21 November 2011, Brussels, p. 11.

Facilitating e-mobility: EURELECTRIC views on charging infrastructure, EURELECTRIC Position Paper, March 2012.

IEC 61851 Electric vehicle conductive charging system, 2010.

SAE Electric Vehicle and Plug-in Hybrid Electric Vehicle Conductive Charge Coupler, SAE J1772, January 2010.

\\http:CHAdeMO.com/.

Joos, 2010, Design and simulation of a fast charging station for PHEV/EV batteries

Yilmaz, 2012, Review of charging power levels and infrastructure for plug-in electric and hybrid vehicles

Bai, 2010, Optimum design of an EV/PHEV charging station with dc bus and storage system

Veneri, 2012, Charging infrastructures for EV: overview of technologies and issues

Song, 2010, A rapid charging station with an ultra-capacitor energy storage system for plug-in electrical vehicles, 2003

Bayram, 2012, Strategies for competing energy storage technologies for DC fast charging stations