Drilling temperature and hole quality in drilling of CFRP/aluminum stacks using diamond coated drill
Tóm tắt
Từ khóa
Tài liệu tham khảo
Boeing, “787 Dreamliner Program Fact Sheet,” http://www.boeing.com/boeing/commercial/787family/programfacts.page (Accessed 13 APR 2015)
Shyha, I. S., Soo, S. L., Aspinwall, D. K., Bradley, S., Perry, R., et al., “Hole Quality Assessment Following Drilling of Metallic-Composite Stacks,” International Journal of Machine Tools and Manufacture, Vol. 51, No. 7, pp. 569–578, 2011.
Isbilir, O. and Ghassemieh, E., “Delamination and Wear in Drilling of Carbon-Fiber Reinforced Plastic Composites using Multilayer TiAlN/TiN PVD-Coated Tungsten Carbide Tools,” Journal of Reinforced Plastics and Composites, Vol. 31, No. 10, pp. 717–727, 2012.
Davim, J. P., Reis, P., and Antonio, C. C., “Experimental Study of Drilling Glass Fiber Reinforced Plastics (GFRP) Manufactured by Hand Lay-up,” Composites Science and Technology, Vol. 64, No. 2, pp. 289–297, 2004.
Xu, J., An, Q., Cai, X., and Chen, M., “Drilling Machinability Evaluation on New Developed High-Strength T800S/250F CFRP Laminates,” Int. J. Precis. Eng. Manuf., Vol. 14, No. 10, pp. 1687–1696, 2013.
Liu, D., Tang, Y., and Cong, W., “A Review of Mechanical Drilling for Composite Laminates,” Composite Structures, Vol. 94, No. 4, pp. 1265–1279, 2012.
Brinksmeier, E. and Janssen, R., “Drilling of Multi-Layer Composite Materials Consisting of Carbon Fiber Reinforced Plastics (CRFP), Titanium and Aluminum Alloys,” CIRP Annals-Manufacturing Technology, Vol. 51, No. 1, pp. 87–90, 2002.
Garrick, R., “Drilling Advanced Aircraft Structures with PCD (Poly-Crystalline Diamond) Drills,” SAE Technical Paper No. 2007-01-3893, 2007.
Park, K. H., Beal, A., Kim, D., Kwon, P., and Lantrip, J., “A Comparative Study of Carbide Tools in Drilling of CFRP and CFRP-Ti Stacks,” Journal of Manufacturing Science and Engineering, Vol. 136, No. 1, Paper No. 014501, 2014.
Zitoune, R., Krishnaraj, V., Almabouacif, B. S., Collombet, F., Sima, M., and Jolin, A., “Influence of Machining Parameters and New Nano-Coated Tool on Drilling Performance of CFRP/Aluminium Sandwich,” Composites Part B: Engineering, Vol. 43, No. 3, pp. 1480–1488, 2012.
Montoya, M., Calamaz, M., Gehin, D., and Girot, F., “Evaluation of the Performance of Coated and Uncoated Carbide Tools in Drilling Thick CFRP/Aluminium Alloy Stacks,” The International Journal of Advanced Manufacturing Technology, Vol. 68, No. 9–12, pp. 2111–2120, 2013.
Ramulu, M., Branson, T., and Kim, D., “A Study on the Drilling of Composite and Titanium Stacks,” Composite Structures, Vol. 54, No. 1, pp. 67–77, 2001.
Davies, M., Ueda, T., M’saoubi, R., Mullany, B., and Cooke, A., “On the Measurement of Temperature in Material Removal Processes,” CIRP Annals-Manufacturing Technology, Vol. 56, No. 2, pp. 581–604, 2007.
Brinksmeier, E., Fangmann, S., and Rentsch, R., “Drilling of Composites and Resulting Surface Integrity,” CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 57–60, 2011.
Le Coz, G., Marinescu, M., Devillez, A., Dudzinski, D., and Velnom, L., “Measuring Temperature of Rotating Cutting Tools: Application to MQL Drilling and Dry Milling of Aerospace Alloys,” Applied Thermal Engineering, Vol. 36, pp. 434–441, 2012.
Liu, J., Zhang, D., Qin, L., and Yan, L., “Feasibility Study of the Rotary Ultrasonic Elliptical Machining of Carbon Fiber Reinforced Plastics (CFRP),” International Journal of Machine Tools and Manufacture, Vol. 53, No. 1, pp. 141–150, 2012.
Wang, X., Kwon, P. Y., Sturtevant, C., and Lantrip, J., “Tool Wear of Coated Drills in Drilling CFRP,” Journal of Manufacturing Processes, Vol. 15, No. 1, pp. 127–135, 2013.
Park, K. H., Beal, A., Kim, D., Kwon, P., and Lantrip, J., “Tool Wear in Drilling of Composite/Titanium Stacks using Carbide and Polycrystalline Diamond Tools,” Wear, Vol. 271, No. 11, pp. 2826–2835, 2011.
Mkaddem, A., Soussia, A. B., and El Mansori, M., “Wear Resistance of CVD and PVD Multilayer Coatings when Dry Cutting Fiber Reinforced Polymers (FRP),” Wear, Vol. 302, No. 1, pp. 946–954, 2013.
Park, K. H. and Kwon, P., “Wear Characteristic on Bam Coated Carbide Tool in Drilling of Composite/Titanium Stack,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 7, pp. 1073–1076, 2012.
Zhang, J., Wang, X., Shen, B., and Sun, F., “Effect of Boron and Silicon Doping on Improving the Cutting Performance of CVD Diamond Coated Cutting Tools in Machining CFRP,” International Journal of Refractory Metals and Hard Materials, Vol. 41, pp. 285–292, 2013.
Lei, X., Shen, B., Cheng, L., Sun, F., and Chen, M., “Influence of Pretreatment and Deposition Parameters on the Properties and Cutting Performance of NCD Coated PCB Micro Drills,” International Journal of Refractory Metals and Hard Materials, Vol. 43, pp. 30–41, 2014.
Zitoune, R., El Mansori, M., and Krishnaraj, V., “Tribo-Functional Design of Double Cone Drill Implications in Tool Wear during Drilling of Copper Mesh/CFRP/Woven Ply,” Wear, Vol. 302, No. 1, pp. 1560–1567, 2013.
Karpat, Y., Deðer, B., and Bahtiyar, O., “Drilling Thick Fabric Woven CFRP Laminates with Double Point Angle Drills,” Journal of Materials Processing Technology, Vol. 212, No. 10, pp. 2117–2127, 2012.
Karpat, Y., Deðer, B., and Bahtiyar, O., “Experimental Evaluation of Polycrystalline Diamond Tool Geometries while Drilling Carbon Fiber-Reinforced Plastics,” The International Journal of Advanced Manufacturing Technology, Vol. 71, No. 5–8, pp. 1295–1307, 2014.
Karpat, Y., Bahtiyar, O., Değer, B., and Kaftanoğlu, B., “A Mechanistic Approach to Investigate Drilling of UD-CFRP Laminates with PCD Drills,” CIRP Annals-Manufacturing Technology, Vol. 63, No. 1, pp. 81–84, 2014.
Isbilir, O. and Ghassemieh, E., “Comparative Study of Tool Life and Hole Quality in Drilling of CFRP/Titanium Stack using Coated Carbide Drill,” Machining Science and Technology, Vol. 17, No. 3, pp. 380–409, 2013.
Le Coz, G., Marinescu, M., Devillez, A., Dudzinski, D., and Velnom, L., “Measuring Temperature of Rotating Cutting Tools: Application to MQL Drilling and Dry Milling of Aerospace Alloys,” Applied Thermal Engineering, Vol. 36, pp. 434–441, 2012.