Determination of thermal resistance at mould-strand interface due to shrinkage in billet continuous casting – Development and application of a novel integrated numerical model

Kristiansson, 2007, Thermomechanical behavior of the solidifying shell within continuous-casting billet molds-a numerical approach, J. Therm. Stresses, 7, 209, 10.1080/01495738408942209

Park, 2002, Analysis of thermomechanical behaviour in billet casting with different mould corner radii, Ironmak. Steelmak., 29, 359, 10.1179/030192302225004601

Wang, 2012, Mold transient heat transfer behavior based on measurement and inverse analysis of slab continuous casting, J. Mater. Process. Technol., 212, 1811, 10.1016/j.jmatprotec.2012.04.001

Xie, 2006, FE numerical simulation of mould temperature field during the continuous casting of steel, Int. J. Adv. Manuf. Technol., 30, 645, 10.1007/s00170-005-0100-3

Du, 2014, Analysis of the non-uniform thermal behavior in slab continuous casting mold based on the inverse finite-element model, J. Mater. Process. Technol., 214, 2676, 10.1016/j.jmatprotec.2014.04.029

Yu, 2015, Estimation of heat transfer coefficients and heat flux on the billet surface by an integrated approach, Int. J. Heat Mass Tran., 90, 645, 10.1016/j.ijheatmasstransfer.2015.07.008

Wang, 2000, Shell growth, surface quality and mould taper design for high-speed casting of stainless steel billets and results analysis, Can. Metall. Q., 39, 441, 10.1179/cmq.2000.39.4.441

Wang, 2010, Continuous casting mould for square steel billet optimised by solidification shrinkage simulation, Ironmak. Steelmak., 37, 341, 10.1179/030192310X12683045806026

V Samarasekera, 1982, The thermal distortion of continuous-casting billet molds, Metall. Trans. B, 13, 91, 10.1007/BF02666960

Liu, 2006, Finite element analysis of thermal and mechanical behavior in a slab continuous casting mold, ISIJ Int., 46, 1652, 10.2355/isijinternational.46.1652

Song, 2014, Heat transfer and deformation behavior of shell solidification in wide and thick slab continuous casting mold, J. Iron Steel Res. Int., 21, 1, 10.1016/S1006-706X(14)60112-6

Li, 2004, Thermomechanical finite-element model of shell behavior in continuous casting of steel, Metall. Mater. Trans. B, 35B, 1151, 10.1007/s11663-004-0071-z

Ray, 2018, Local heat flux profiles and interfacial thermal resistance in steel continuous casting, J. Mater. Process. Technol., 255, 605, 10.1016/j.jmatprotec.2018.01.011

Li, 2003, Ideal taper prediction for billet casting, 685

Chandra, 1992

Ushijima, 1962, On the air gap between the billet and the mold, Tetsu-To-Hagane, 48, 747, 10.2355/tetsutohagane1955.48.6_747

Park, 2002, Analysis of thermo-mechanical behavior in billet casting, 669