Estimation of surface heat flux in continuous casting mould with limited measurement of temperature

Samarasekera, 1979, The thermal field in continuous-casting moulds, Can Metall Q, 18, 251, 10.1179/cmq.1979.18.3.251 Savage, 1954, The problem of rupture of the billet in the continuous casting of steel, J Iron Steel Inst, 178, 269 Mizikar, 1967, Mathematical heat transfer model for solidification of continuous cast steel slabs, Trans AIME, 239, 1747 Upton, 1988, Physical metallurgy and mathematical modeling as tools for continuous casting optimization at LTV steel, Iron Steelmak, 15, 51 Ho, 1991 Tsutsumi, 1999, Surface roughness of solidified mold flux in continuous casting process, ISIJ Int, 39, 1150, 10.2355/isijinternational.39.1150 Zhan, 2008, Real heat flux analysis of continuously casting round billet. Journal of Iron and Steel Research, International, 15, 25 Beck, 1985 Parwani, 2014, A hybrid approach using CGM and DE algorithm for estimation of boundary heat flux in a parallel plate channel, Numer Heat Transf A, 65, 461, 10.1080/10407782.2013.832063 Singh, 2017, Estimation of time-dependent wall heat flux from single thermocouple data, Int J Therm Sci, 115, 1, 10.1016/j.ijthermalsci.2017.01.010 Mohammadiun, 2011, Estimation of the time-dependent heat flux using the temperature distribution at a point by conjugate gradient method, Int J Therm Sci, 50, 2443, 10.1016/j.ijthermalsci.2011.07.003 Liu, 2012, Inverse estimation of wall heat flux by using particle swarm optimization algorithm with Gaussian mutation, Int J Therm Sci, 54, 62, 10.1016/j.ijthermalsci.2011.11.013 Udayraj, 2015, Performance analysis and feasibility study of ant colony optimization, particle swarm optimization and cuckoo search algorithms for inverse heat transfer problems, Int J Heat Mass Transf, 89, 359, 10.1016/j.ijheatmasstransfer.2015.05.015 Parwani, 2015, Estimation of boundary heat flux using experimental data of temperature in a 2D turbulent forced convection flow field, Heat Mass Transf, 51, 411, 10.1007/s00231-014-1421-2 Parwani, 2014, Estimation of transient boundary flux for a developing flow in a parallel plate channel, Int J Numer Methods Heat Fluid Flow, 24, 522, 10.1108/HFF-01-2012-0020 Beck, 1997 Badri, 2005, A mold simulator for the continuous casting of steel: Part I. The development of a simulator, Metal. Mater Trans B, 36B, 355, 10.1007/s11663-005-0065-5 Ko, 2014, Simulation of low carbon steel solidification and mold flux crystallization in continuous casting using a multi-mold simulator, Metals Mater Int, 20, 141, 10.1007/s12540-014-1017-x Park, 2017, Evaluating the heat transfer phenomena and the interfacial thermal resistance of mold flux using a copper disc mold simulator, Int J Heat Mass Transf, 109, 1014, 10.1016/j.ijheatmasstransfer.2017.02.092 Zhang, 2014, A study for initial solidification of sn-pb alloy during continuous casting: Part I. The development of the technique, Metal. Mater Trans B, 45B, 1038, 10.1007/s11663-013-9967-9 Zhang, 2015, Mold simulator study of the initial solidification of molten steel in continuous casting mold. Part I: experiment process and measurement, Metal. Mater Trans B, 46B, 2361, 10.1007/s11663-015-0413-z Zhang, 2015, Calculation of heat flux across the hot surface of continuous casting mold through two-dimensional inverse heat conduction problem, Metal. Mater Trans B, 46B, 2137, 10.1007/s11663-015-0418-7 Wang, 2012, Mold transient heat transfer behavior based on measurement and inverse analysis of slab continuous casting, J Mater Process Technol, 212, 1811, 10.1016/j.jmatprotec.2012.04.001 P Ranut, C Persi, E Nobile and S Spagnul. Estimation of heat flux distribution in a continuous casting mould by inverse heat transfer algorithms. Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2011, Washington, DC, USA, August 28-31, 2011. Hebi, 2007, Inverse problem-based analysis on non-uniform profiles of thermal resistance between strand and mould for continuous round billets casting, J Mater Process Technol, 183, 49, 10.1016/j.jmatprotec.2006.09.023 Yin, 2006, The inverse problem-based interfacial heat transfer between the billet and mould, and the crack sensitiveness area of strand, Dev Chem Eng Mineral Process, 14, 473 Gonzalez, 2003, Modeling of the solidification process in a continuous casting installation for steel slabs, Metall Trans B, 34B, 455, 10.1007/s11663-003-0072-3 Dvorkin, 2003, Finite element models in the steel industry Part I: simulation of flat product manufacturing processes, Comput Struct, 81, 559, 10.1016/S0045-7949(02)00402-9 Nowak, 2010, An effective 3-D inverse procedure to retrieve cooling conditions in an aluminium alloy continuous casting problem, Appl Therm Eng, 30, 1140, 10.1016/j.applthermaleng.2010.01.029 Mahapatra, 1991, Mold behavior and its influence on quality in the continuous casting of steel slabs: Part I. Industrial trials, mold temperature measurements, and mathematical modeling, Metall Trans B, 22, 861, 10.1007/BF02651163 Singh, 1998 Xie, 2014, Mathematical modeling of heat transfer in mold copper coupled with cooling water during the slab continuous casting process, Metal. Mater Trans B, 45B, 2442, 10.1007/s11663-014-0127-7 Ozisik, 2000