Deformed metals and alloys with a structural scale from 5 nm to 100 nm
Tóm tắt
The processing, structure and properties of deformed metals and alloys with a structural scale from the micrometer to the nanometer dimensions has been the subject of a recent viewpoint set [1]. The present paper will focus on deformed metals and alloys with a structural scale from 5 nm to 100 nm, concentrating on materials processed by high pressure torsion (HPT), surface mechanical attrition treatment (SMAT) and sliding. A detailed microstructural characterization has been followed by an analysis of the relationship between structural features and processing parameters. In this analysis, some general approaches have been applied for example scaling of the evolution of the boundary spacing. This analysis is the basis for a brief discussion of the relationship between the microstructural parameters and the strength.
Tài liệu tham khảo
Script Mater 51 (2004) 751–841 (Viewpoint Set NO. 35. ‘Metals and alloys with a structural scale from the micrometer to the atomic dimension’, edited by N. Hansen)
Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Progr Mater Sci 45:103
Richert M, Liu Q, Hansen N (1998) Mater Sci Eng 260A:275
Saito Y, Tsuji N, Utsunomiya H, Sakai T, Hong RG (1998) Scripta Mater 39:1221
Hughes DA, Hansen N (2001) Phys Rev Lett 87:135503
Fecht HJ, Hellstern E, Fu Z, Johnson WL (1990) Metall Trans 21A:2333
Umemoto M, Todaka Y, Tsuchiya K (2003) Mater Trans 44:1488
Lu K, Lu J (1999) J Mater Sci Technol 15:193; Mater Sci Eng (2004) 375–377A:38
Zhang HW, Hei ZK, Liu G, Lu J, Lu K (2003) Acta Mater 51:1871
Tao NR, Wang ZB, Tong WP, Sui ML, Lu J, Lu K (2002) Acta Mater 50:4063
Wu X, Tao N, Hong Y, Xu B, Lu J, Lu K (2002) Acta Mater 50:2075
Zhu KY, Vassel A, Brisset F, Lu J, Lu K (2004) Acta Mater 52:4101
Scripta Mater. 49 (2003) 625–680 (Viewpoint Set No. 31. ‘Mechanical properties of fully dense nanocrystalline metals’, edited by H. Van Swygenhoven and J.R. Weertman)
Huang X, Vorhauer A, Winther G, Hansen N, Pippan R, Zehetbauer M (2004) In: Zhu YT, Langdon TG, Valiev RZ, Semiatin SL, Shin DH, Lowe TC (eds) Ultrafine grained materials III. TMS (The Minerals, Metals & Materials Society), p 235
Huang X, Winther G, Hansen N, Hebesberger T, Vorhauer A, Pippan R, Zehetbauer M (2003) Mater Sci Forum 426–432:2819
Winther G, Hansen N, Hebesberger T, Huang X, Pippan R, Zehetbauer M (2001) In: Dinesen AR, Eldrup M, Juul Jensen D, Linderoth S, Pedersen TB, Pryds NH, Schrøder Pedersen A, Wert JA (eds) Proceedings of the 22nd Risø international symposium on materials science: science of metastable and nanocrystalline alloys-structure, properties and modeling, Risø National Laboratory, Roskilde, Denmark, p 435
Zhilyaev AP, Lee S, Nurislamova GV, Valiev RZ, Landon TG (2001) Scripta Mater 44:2753
Hughes DA, Dawson DB, Korellis JS, Weingarten LI (1995) Wear 181:458
Hansen N (2004) In: Gundlach C, Haldrup K, Hansen N, Huang X, Juul Jensen D, Leffers T, Li ZJ, Nielsen SF, Pantleon W, Wert JA, Winther G (eds) Proceedings of the 25th Risø international symposium on materials science: evolution of deformation microstructures in 3D. Risø National Laboratory, Roskilde, Denmark, p 13
Huang X, Tsuji N, Hansen N, Minamino Y (2003) Mater Sci Eng 340A:265
Hughes DA, Hansen N (2004) ASM handbook 10th edn., vol 9: metallography and microstructures. ASM International, Metals Park, Ohio, p 192
Kuhlmann-Wilsdorf D, Hansen N (1991) Scripta Metall Mater 25:1557
Kuhlmann-Wilsdorf D (1989) Mater Sci Eng 113A:1
Kuhlmann-Wilsdorf D (1985) Phys Stat Sol 225:225
Liu Q, Hansen N (1995) Scripta Metall Mater 32:1289
Hughes DA, Hansen N (2003) Phil Mag 83:3871
Bay B, Hansen N, Hughes DA, Kuhlmann-Wilsdorf D (1992) Acta Metall Mater 40:205
Hansen N (2001) Metall Mater Trans 32A:2917
Zhilyaev AP, Kim B-K, Nurislamova GV, Baró MD, Szpunar JA, Langdon TG (2002) Scripta Mater 46:575
Honeycombe RWK (1984) The plastic deformation of metals. Edward Arnold Ltd
Liao XZ, Zhou F, Lavernia EJ, He DW, Zhu YT (2003) Appl Phys Lett 83:5062
Rösner H, Markmann J, Weissmüller J (2004) Phil Mag Lett 84:321
Chen MW, Ma E, Hemker KJ, Sheng HW, Wang YM, Cheng XM (2003) Science 300:1275
Liao XZ, Huang JY, Zhu YT, Zhou F, Lavernia EJ (2003) Philos Mag 83:3065
Asaro RJ, Krysl P, Kad B (2003) Philos Mag Lett 83:733
Zhu YT, Liao XZ, Srinivasan SG, Zhao YH, Baskes MI, Zhou F, Lavernia EJ (2004) Appl Phys Lett 85:5049
Zhu YT, Liao XZ, Srinivasan SG, Lavernia EJ (2005) J Appl Phys 98:034319
Van Swygenhoven H, Derlet PM, Frøseth AG (2004) Nature Mater 3:399
Yamakov V, Wolf D, Phillpot SR, Mukherjee AK, Gleiter H (2004) Nature Mater 3:43
Schiøtz J, Di Tolla FD, Jacobsen KW (1998) Nature 391:561
Schiøtz J, Jacobsen KW (2003) Science 301:1357
Hughes DA, Hansen N (2000) Acta Mater 48:2985
Alberdi J (1984) Universidad de Navarra Facultad de Ciencias, San Sebastian, Grandes Deformaciones Plasticas en Frio en Policristales de Cobrey Aluminio (Torsion)
Hu H (1969) In: Grewen J, Wassermann G (eds) Textures in research and practice. Springer-Verlag, Berlin, p 200
Dinda GP, Rösner H, Wilde G (2005) Scripta Mater 52:577
Liu Q, Huang X, Lloyd DJ, Hansen N (2002) Acta Mater 50:3789
Godfrey A, Hughes DA (2002) Mater Character 48:89
Hughes DA, Chrzan DC, Liu Q, Hansen N (1998) Phys Rev Lett 81:4664
Godfrey A, Hughes DA (2004) Scripta Mater 51:831
Hansen N (2004) Scripta Mater 51:801
Hansen N, Huang X, Ueji R, Tsuji N (2004) Mater Sci Eng 387–389A:191
Hall EO (1951) Proc Phys Soc London 64B:747
Petch NJ (1953) J Iron Steel Inst 174:25
Thompson AAW (1975) Acta Metall 23:1337
Li BL, Godfrey A, Meng QC, Liu Q, Hansen N (2004) Acta Mater 52:1069
Dalla Torre F, Spätig P, Schäublin R, Victoria M (2005) Acta Mater 53:2337
Wang YM, Wang K, Pan D, Lu K, Hemker KJ, Ma E (2003) Scripta Mater 48:1581
Chen XH, Lu J, Lu L, Lu K (2005) Scripta Mater 52:1039