Coarsening of immiscible co‐continuous blends during quiescent annealing

AICHE Journal - Tập 51 Số 1 - Trang 271-280 - 2005
Zhenhua Yuan1, Basil D. Favis1
1CRASP, Department of Chemical Engineering, Ecole Polytechnique, Montreal, Quebec H3C 3A7, Canada

Tóm tắt

AbstractThe quiescent annealing of four different co‐continuous polystyrene/high‐density polyethylene blends of widely different viscosity ratios were examined at three different temperatures. In addition, the coarsening of a co‐continuous poly(methyl‐methacrylate)/high‐density polyethylene blend was also studied. Since the morphology of co‐continuous systems is very difficult to accurately analyze using microscopic techniques, the pore dimensions of the PS and PMMA phase are characterized, after solvent extraction, using mercury porosimetry. The volume average pore diameter is used in order to track the large pores in the system. A significant coarsening effect, as evidenced by the growth of pore size, is observed. For these uncompatibilized systems a direct relationship between pore size R and annealing time t (R ∼ kt) is observed. Using a conceptual model of co‐continuity, based on thin and thick rods, it is proposed that the driving force for the coarsening process is a capillary pressure effect. The differences in capillary pressure throughout the co‐continuous structure result in the continuous merging of thin parts toward the thick ones. This process is confirmed through the presence of a large number of extremely thin threads in contact with very thick ones after annealing. In order to understand the factors influencing the coarsening rate we have adapted an approach used for phase separation. The thick rod is treated as a cylindrical thread which cannot breakup via a capillary instability due to the numerous branches which continuously feed it. In such a case it is proposed that the rate of growth of the distortion amplitude, dα/dt, taken from Tomotika's analysis for capillary instabilities, can be directly related to the coarsening rate, dR/dt. Since α0/R0 (the ratio of the initial distortion amplitude to the initial thread radius) is found to be constant for all of the co‐continuous systems studied, all of the coarsening rates for the various systems are controlled by the interfacial tension, the zero shear viscosity of the surrounding medium and Ω from Tomotika theory. An excellent correlation of this model is demonstrated for all of the systems studied. These results and the proposed mechanism also indicate that the quiescent coarsening of immiscible co‐continuous blends can continue over long time periods while still maintaining co‐continuity and, hence, can provide an important route toward morphology control in percolated systems. © 2004 American Institute of Chemical Engineers AIChE J, 51:271–280, 2005

Từ khóa


Tài liệu tham khảo

10.1002/pen.760350809

10.1122/1.550033

10.1002/pen.760331409

Chesters A. K., 1991, The Modeling of Coalescence Processes in Fluid‐Liquid Dispersions: A Review of Current Understanding, Chem. Eng. Res. Design, 69, 259

10.1007/BF01332854

10.1122/1.550087

10.1002/pen.760261908

10.1002/app.1990.070390207

10.1002/pen.760272105

10.1016/0014-3057(89)90239-5

10.1177/009524439602800202

10.1002/pc.750090204

10.1016/0032-3861(95)90992-B

10.1002/pen.760352306

10.1016/S0032-3861(97)00590-9

10.1002/(SICI)1099-0488(19990201)37:3<181::AID-POLB1>3.0.CO;2-I

10.1016/0032-3861(84)90337-9

Gregg S. J., 1982, Adsorption, Surface Area and Porosity

10.1016/S0032-3861(98)00496-0

10.1016/S0032-3861(00)00785-0

10.1007/978-94-015-7955-1

10.1021/ba-1975-0142.ch005

10.1002/(SICI)1099-0488(19970130)35:2<293::AID-POLB7>3.0.CO;2-T

10.1002/(SICI)1099-0488(20000515)38:10<1359::AID-POLB130>3.0.CO;2-D

10.1021/ma9512768

10.1080/00222358008080917

10.1021/ma981481y

10.1002/pen.760302208

10.1016/S0032-3861(97)00377-7

10.1103/PhysRevA.20.595

10.1017/S0022112086001118

10.1098/rspa.1935.0104

10.1122/1.550248

10.1122/1.550209

10.1016/S0032-3861(98)00875-1

10.1016/S0032-3861(98)00342-5

10.1016/S0032-3861(99)00455-3

10.1002/pen.11491

10.1103/PhysRev.17.273

10.1002/pen.11566

Wu S., 1982, Polymer Interface and Adhesion

10.1002/pen.760270506

10.1002/1099-0488(20000915)38:18<2378::AID-POLB50>3.0.CO;2-I

Thông tin
Thông tin xuất bản

AICHE Journal

Tập 51 Số 1

271-280

Thông tin tác giả