Biaxial wrinkling analysis of composite-faced sandwich plates with soft core using improved high-order theory

Aiello, 2007, Buckling load design of sandwich panels made with hybrid laminated faces and transversely flexible core, J. Sandw. Struct. Mater., 9, 467, 10.1177/1099636207070854 Allen, 1969 Benson, 1967, General instability and face wrinkling of sandwich plates – unified theory and applications, AIAA J., 5, 729, 10.2514/3.4054 Birman, 2005, Thermally induced bending and wrinkling in large aspect ratio sandwich panels, Compos. Part A, 36, 1412, 10.1016/j.compositesa.2004.11.013 Birman, 2004, Wrinkling of composite-facing sandwich panels under biaxial loading, J. Sandw. Struct. Mater., 6, 217, 10.1177/1099636204033643 Dafedar, 2003, Stability of sandwich plates by mixed, higher-order analytical formulation, Int J Solids Struct., 40, 4501, 10.1016/S0020-7683(03)00283-X Dawe, 2001, Overall and local buckling of sandwich plates with laminated faceplates. Part I: analysis, Comput. Methods Appl. Mech. Eng., 190, 5197, 10.1016/S0045-7825(01)00169-4 Fagerberg, 2005, Effects of anisotropy and loading on wrinkling of sandwich panels, J. Sandw. Struct. Mater., 7, 177, 10.1177/109963205048525 Frostig, 1998, Buckling of sandwich panels with a transversely flexible core: high-order theory, Int. J. Solids Struct., 35, 183, 10.1016/S0020-7683(97)00078-4 Grenestedt, 2005, Elastic – plastic wrinkling of sandwich panels with layered cores, J. Appl. Mech., 72, 276, 10.1115/1.1828063 Gough, 1940, The stabilization of a thin sheet by a continuous support medium, J. R. Aeronaut. Soc., 44, 12, 10.1017/S036839310010495X Hadi, 2000, Development of Benson-Mayers theory on the wrinkling of anisotropic sandwich panels, Compos. Struct., 49, 425, 10.1016/S0263-8223(00)00077-5 Hoff, 1945, The buckling of sandwich-type panels, J. Aeronaut. Sci., 12, 285, 10.2514/8.11246 Hohe, 2005, Global Buckling and Face Wrinkling Response of Sandwich Panels under Transient Loads, 10.2514/6.2005-2100 Kant, 2000, Analytical solutions using a higher order refined theory for the stability analysis of laminated composite and sandwich plates, Struct. Eng. Mech. Int. J., 10, 337, 10.12989/sem.2000.10.4.337 Kardomateas, 2005, Wrinkling of wide sandwich panels/beams with orthotropic phases by an elasticity approach, J. Appl. Mech., 72, 818, 10.1115/1.1978919 Kheirikhah, 2011, Wrinkling Analysis of Rectangular Soft-core Composite Sandwich Plates Kheirikhah, 2011, Biaxial buckling analysis of soft-core composite sandwich plates using improved high-order theory, Eur. J. Mech. A Solids, 31, 54, 10.1016/j.euromechsol.2011.07.003 Leotoing, 2004, Using new closed-form solutions to set up design rules and numerical investigations for global and local buckling of sandwich beams, J. Sandw. Struct. Mater., 6, 263, 10.1177/1099636204034632 Lopatin, 2008, Symmetrical facing wrinkling of composite sandwich panels, J. Sandw. Struct. Mater., 10, 475, 10.1177/1099636208097196 Meyer-Piening, 2006, Sandwich plates: stresses, deflection, buckling and wrinkling loads – a case study, J. Sandw. Struct. Mater., 8, 381, 10.1177/1099636206064825 Niu, 1999, Modeling of wrinkling in sandwich panels under compression, J. Eng. Mech., 125, 875, 10.1061/(ASCE)0733-9399(1999)125:8(875) Plantema, 1966 Reddy, 2004, Mechanics of Laminated Composite Plates and Shells, 10.1201/b12409 Shariyat, 2010, Non-linear dynamic thermo-mechanical buckling analysis of the imperfect sandwich plates based on a generalized three-dimensional high-order global–local plate theory, Compos. Struct., 92, 72, 10.1016/j.compstruct.2009.06.013 Vinson, 1999 Vonach, 2001, A general approach to the wrinkling instability of sandwich plates, Struct. Eng. Mech., 12, 363, 10.12989/sem.2001.12.4.363 Yuan, 2001, Overall and local buckling of sandwich plates with laminated faceplates. Part II: Applications, Comput. Methods Appl. Mech. Eng., 190, 5215, 10.1016/S0045-7825(01)00170-0 Zenkert, 1995