Bending behavior of empty and foam-filled aluminum tubes with different cross-sections

Liu, 2008, Bending collapse of thin-walled circular tubes and computational application, Thin-Walled Structures Journal, 46, 442, 10.1016/j.tws.2007.07.014

Wierzbicki, 1994, Stress profiles in thin-walled prismatic columns subjected to crash loading-II. Bending, Composite Structures Journal, 51, 625, 10.1016/S0045-7949(05)80002-1

Kim, 2001, Bending collapse of thin-walled rectangular section columns, Computer and Structure Journal, 79, 1897, 10.1016/S0045-7949(01)00089-X

Kecman, 1983, Bending collapse of rectangular and square section tube, International Journal of Mechanical Science, 25, 623, 10.1016/0020-7403(83)90072-3

Johnson, 1977, In-extensional collapse of thin-walled tube under axial compression, Journal of Strain Analysis, 12, 317, 10.1243/03093247V124317

Abramowicz, 1984, Dynamic axial crushing of circular tubes, International Journal of Impact Engineering, 2, 263, 10.1016/0734-743X(84)90010-1

Liu, 2006, Bending collapse of thin-walled beams with channel cross-section, International Journal of Crashworthiness, 11, 251, 10.1533/ijcr.2005.0408

Seung Min, 2005, Energy absorption characteristics on aluminum beams strengthened with CFRP laminates under impact loading, Key Engineering Materials, 297–300, 1344

Abramowicz, 1989, Axial crushing of multi-corner sheet metal columns, Journal of Applied Mechanics, 53, 113, 10.1115/1.3176030

Abramowicz, 1981, Simplified crushing analysis of thin-walled columns and beams, Rozprawy Inzynierskie, Engineering Transportation Journal, 29, 5

McGregor, 1993, Impact performance of aluminium structures

Recke, L. and Sielaff, J., Simulation of crash behavior of a passenger car body in the predevelopment stage by stage by means of simplified FE model. In: Proceedings of VDI Conference Series, Dusseldorf, 1990: 818.

Zarei, 2008, Bending behavior of empty and foam-filled beams: Structural optimization, International Journal of Impact Engineering, 35, 521, 10.1016/j.ijimpeng.2007.05.003

Deb, 2004, Design of an aluminum-based vehicle platform for front impact safety, International Journal of Impact Engineering, 30, 1055, 10.1016/j.ijimpeng.2004.04.016

Reyes, 2004, Modeling of material failure in foam-based components, International Journal of Impact Engineering, 30, 805, 10.1016/j.ijimpeng.2004.03.008

Deshpande, 2000, Isotropic models for metallic Foams, Journal of the Mechanics and Physics of Solids, 48, 1253, 10.1016/S0022-5096(99)00082-4

Wierzbicki, 1994, Stress profiles in thin-walled prismatic columns subjected to crash loading-II. Bending, Computer and Structure Journal, 51, 625, 10.1016/S0045-7949(05)80002-1

Chen, 2002, Bending collapse of thin-walled beams with ultralight filler: numerical simulation and weight optimization, Acta Mechanica Journal, 153, 183, 10.1007/BF01177451

Santosa, S., Crashworthiness Analysis of Ultralight Metal Structures. PhD thesis, Massachusetts Institute of Technology, 1999.

Santosa, 1999, Effect of an ultralight metal filler on the bending collapse behavior of thin-walled prismatic columns, International Journal of Mechanical Science, 41, 995, 10.1016/S0020-7403(98)00066-6

Shahbeyk, 2004, A parametric study of the bending crush performance of empty and metal foam-filled box-beams, International Journal of Crashworthiness, 9, 643, 10.1533/ijcr.2004.0318