Application of Nonlinear Lamb Wave Mixing Method for Residual Stress Measurement in Metal Plate

Springer Science and Business Media LLC
Jingpin Jiao1, Li Li1, Xiang Gao1, Qiuming Cheng1, Cunfu He1, Bin Wu1
1Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China

Tóm tắt

AbstractHarmonic nonlinear ultrasound can offer high sensitivity for residual stress measurements; however, it cannot be used for local stress measurements at a point in space and exhibits nonlinear distortions in the experimental system. This paper presents a feasibility study on the measurement of residual stress in a metal plate using a nonlinear Lamb wave-mixing technique. The resonant conditions for two Lamb waves to generate a mixing frequency wave are obtained via theoretical analysis. Finite element simulations are performed to investigate the nonlinear interactions between the two Lamb waves. Results show that two incident A0 waves interact in regions of material nonlinearity and generate a rightward S0 wave at the sum frequency. Residual stress measurement experiments are conducted on steel plate specimens using the collinear Lamb wave-mixing technique. By setting different delays for two transmitters, the generated sum-frequency component at different spatial locations is measured. Experimental results show that the spatial distribution of the amplitude of the sum-frequency component agrees well with the spatial distribution of the residual stress measured using X-rays. The proposed collinear Lamb wave-mixing method is effective for measuring the distribution of residual stress in metal plates.

Từ khóa


Tài liệu tham khảo

M M Shokrieh. Residual stresses in composite materials. Residual Stresses in Composite Materials, 2014: 350-373.

R F Charles, W Keith. An introduction to structural health monitoring. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2007, 365(1851): 303-315.

R Bullough, V R Green, B Tomkins, et al. A review of methods and applications of reliability analysis for structural integrity assessment of UK nuclear plant. International Journal of Pressure Vessels and Piping, 1999, 76(13): 909-919.

Youtsos, Anastasius. Residual stress and its effects on fatigue and fracture. Springer Netherlands, 2006.

X F Huang, Z W Liu, H M Xie. Recent progress in residual stress measurement techniques. Acta Mechanica Solida Sinica, 2013, 26(6): 570-583.

N S Rossini, M Dassisti, K Y Benyounis, et al. Methods of measuring residual stresses in components. Materials & Design, 2012, 35(119): 572-588.

X Zhu, F Scalea, M Fateh. Thermal stress measurement in continuous welded rails using the hole-drilling method. Experimental Mechanics, 2017, 57(1): 165-178.

G S Schajer. Relaxation methods for measuring residual stresses: techniques and opportunities. Experimental Mechanics, 2010, 50(8): 1117-1127.

C G Xu, H X Li, J F Wang, et al. Ultrasonic shear and longitudinal wave testing method of residual stress. Acta Acustica, 2017, 42(2): 195-204. (in Chinese)

A J Allen, M T Hutchings, C G Windsor, et al. Neutron diffraction methods for the study of residual stress fields. Advances In Physics, 1985, 34(4): 445-473.

C H Ma, J H Huang, H Chen. Residual stress measurement in textured thin film by grazing-incidence X-ray diffraction. Thin Solid Films, 2002, 418(2): 73-78.

T C Chu, W F Ranson, M A Sutton, et al. Applications of digital-image correlation techniques to experimental mechanics. Experimental Mechanics,1985, 25(3): 232-244.

L Mierczak, D C Jiles, G Fantoni. A new method for evaluation of mechanical stress using the reciprocal amplitude of magnetic Barkhausen noise. IEEE Transactions on Magnetics, 2011, 47(2): 459-465.

H J Lim, H Sohn. Online stress monitoring technique based on Lamb wave measurements and a convolutional neural network under static and dynamic loadings. Experimental Mechanics, 2020, 60(1): 171-179.

P R L Alves, J S C Filho, M G Farinhas. A new approach to determine tensile stress states from the parameters of longitudinal waves. Applied Mathematical Modelling, 2020, 83(1): 189-201.

H Kim, T Kim, D Morrow, et al. Stress measurement of a pressurized vessel using ultrasonic subsurface longitudinal wave with 1-3 composite transducers. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2020, 67(1): 158-165.

W Wang, C Xu, Y Zhang, et al. An improved ultrasonic method for plane stress measurement using critically refracted longitudinal waves. NDT&E International, 2018, 99(1): 117-122.

S Chaki, W Ke, H Demouveau. Numerical and experimental analysis of the critically refracted longitudinal beam. Ultrasonics, 2013, 53(1): 65-69.

Y Chen, C S Man , K Tanuma , et al. Monitoring near-surface depth profile of residual stress in weakly anisotropic media by Rayleigh-wave dispersion. Wave Motion, 2018, 77(1): 119-138.

M Mohammad, J J Fesharaki. Termination of acoustoelastic acoustoplastic constants to measure stress in elastic/plastic limits by using LCR wave. NDT &E International, 2019, 104(1): 69-76.

W Wang, Y M Zhang , Y F Zhou, et al. Plane stress measurement of orthotropic materials using critically refracted longitudinal waves. Ultrasonics, 2019, 94(1): 430-437.

M X Deng. Cumulative second-harmonic generation accompanying nonlinear shear horizontal mode propagation in a solid plate. Journal of Applied Physics, 1998, 84(7): 3500-3505.

X Y Ding, Y X Zhao, M X Deng, et al. One-way Lamb mixing method in thin plates with randomly distributed micro-cracks. International Journal of Mechanical Sciences, 2020, 171(1): 105371.

H Chen, G Gao, N Hu, et al. Modeling and simulation of frequency mixing response of two counter-propagating Lamb waves in a two-layered plate. Ultrasonics, 2020, 104(1): 106109.

A N Li , B Yuan, Y Z Wang, et al. Diode behavior and nonreciprocal transmission in nonlinear elastic wave metamaterial. Mechanics of Materials, 2019, 133(1): 85-101.

G J Kim, S J Park, H G Kwak. Application of nonlinear ultrasonic method for monitoring of stress state in concrete. Journal of the Korean Society for Nondestructive Testing, 2016, 36(2): 121-129.

K Y Jhang. Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: A review. International Journal of Precision Engineering & Manufacturing, 2009, 10(1): 123-135.

H Hu, Z Zou, Y Jiang, et al. Finite element simulation and experimental study of residual stress testing using nonlinear ultrasonic surface wave technique. Applied Acoustics, 2019, 154 (1): 11-17.

H J Yan, F B Liu, Q X Pan. Nonlinear ultrasonic properties of stress in 2024 Aluminum. Advanced Materials Research, 2017, 1142(1): 371-377.

M H Liu, J Y Kim, L Jacobs, et al. Experimental study of nonlinear Rayleigh wave propagation in shot-peened aluminum plates- feasibility of measuring residual stress. NDT&E International, 2011, 44(1): 67-74.

H L Mao, Y H Zhang, H Y Mao, et al. Stress evaluation of metallic material under steady state based on nonlinear critically refracted longitudinal wave. Results in Physics, 2018, 9(1): 665-672.

J P Jiao, X J Meng, C F He, et al. Nonlinear Lamb wave-mixing technique for micro-crack detection in plates. NDT&E International, 2017, 85(1): 63-71。

A J Croxford, P D Wilcox, B W Drinkwater, et al. The use of non-collinear mixing for nonlinear ultrasonic detection of plasticity and fatigue. The Journal of the Acoustical Society of America, 2009, 126(5): 117-122.

M Liu, J Y Kim, J M Qu, et al. Measuring residual stress using nonlinear ultrasound. AIP Conference Proceedings, 2010, 1211(1): 1365-1372.

V K Chillara, C J Lissenden. Nonlinear guided waves in plates: a numerical perspective. Ultrasonics, 2014, 54(6): 1553–1558.

Thông tin
Thông tin xuất bản

Springer Science and Business Media LLC

Thông tin tác giả