Amine-functionalized MIL-101(Cr) fibers for direct air capture at cold temperatures using rapid temperature vacuum swing adsorption
Tài liệu tham khảo
Lackner, 1999
Lackner, 2012, The urgency of the development of CO2 capture from ambient air, Proc. Natl. Acad. Sci., 109, 13156, 10.1073/pnas.1108765109
N.G.M. Lab, Trends in Atmospheric Carbon Dioxide, 2023.
Darunte, 2016, Direct air capture of CO2 using amine functionalized MIL-101 (Cr), ACS Sustain. Chem. Eng., 4, 5761, 10.1021/acssuschemeng.6b01692
Bhatt, 2016, A fine-tuned fluorinated MOF addresses the needs for trace CO2 removal and air capture using physisorption, J. Am. Chem. Soc., 138, 9301, 10.1021/jacs.6b05345
McDonald, 2015, Cooperative insertion of CO2 in diamine-appended metal-organic frameworks, Nature, 519, 303, 10.1038/nature14327
Liu, 2023, Modified metal–organic framework by a novel coordinatively unsaturated amine grafting mechanism for direct air capture of CO2, Chem. Eng. J., 454, 10.1016/j.cej.2022.140431
Al-Absi, 2022, Development of in situ polymerized amines into mesoporous silica for direct air CO2 capture, Chem. Eng. J., 447, 10.1016/j.cej.2022.137465
Mukherjee, 2019, Trace CO2 capture by an ultramicroporous hysisorbents with low water affinity, Sci. Adv., 5, eaax9171, 10.1126/sciadv.aax9171
Rim, 2022, Sub-ambient temperature direct air capture of CO2 using amine-impregnated MIL-101 (Cr) enables ambient temperature CO2 recovery, JACS Au, 2, 380, 10.1021/jacsau.1c00414
Rim, 2023, Support pore structure and composition strongly influence the direct air capture of CO2 on supported amines, J. Am. Chem. Soc., 10.1021/jacs.2c12707
NOAA, Annual 2022 Global Climate Report, 2022.
Kong, 2022, Research needs targeting direct air capture of carbon dioxide: Material & process performance characteristics under realistic environmental conditions, Korean J. Chem. Eng., 39, 1, 10.1007/s11814-021-0976-0
Bajamundi, 2019, Capturing CO2 from air: Technical performance and process control improvement, J. CO2 Util., 30, 232, 10.1016/j.jcou.2019.02.002
Song, 2022, Cold-temperature capture of carbon dioxide with water coproduction from air using commercial zeolites, Ind. Eng. Chem. Res., 61, 13624, 10.1021/acs.iecr.2c02041
Wilson, 2022, The potential of direct air capture using adsorbents in cold climates, Iscience, 25, 10.1016/j.isci.2022.105564
Fu, 2022, Confinement effects facilitate low-concentration carbon dioxide capture with zeolites, Proc. Natl. Acad. Sci., 119, 10.1073/pnas.2211544119
Sabatino, 2021, A comparative energy and costs assessment and optimization for direct air capture technologies, Joule, 5, 2047, 10.1016/j.joule.2021.05.023
Wurzbacher, 2011, Separation of CO2 from air by temperature-vacuum swing adsorption using diamine-functionalized silica gel, Energ. Environ. Sci., 4, 3584, 10.1039/c1ee01681d
Rezaei, 2015, Shaping amine-based solid CO2 adsorbents: Effects of pelletization pressure on the physical and chemical properties, Microporous Mesoporous Mater., 204, 34, 10.1016/j.micromeso.2014.10.047
Sujan, 2019, Direct CO2 capture from air using poly (ethylenimine)-loaded polymer/silica fiber sorbents, ACS Sustain. Chem. Eng., 7, 5264, 10.1021/acssuschemeng.8b06203
Wurzbacher, 2012, Concurrent separation of CO2 and H2O from air by a temperature-vacuum swing adsorption/desorption cycle, Environ. Sci. Tech., 46, 9191, 10.1021/es301953k
Elfving, 2021, Experimental comparison of regeneration methods for CO2 concentration from air using amine-based adsorbent, Chem. Eng. J., 404, 10.1016/j.cej.2020.126337
Wijesiri, 2019, Desorption process for capturing CO2 from air with supported amine sorbent, Ind. Eng. Chem. Res., 58, 15606, 10.1021/acs.iecr.9b03140
Lively, 2009, Hollow fiber adsorbents for CO2 removal from flue gas, Ind. Eng. Chem. Res., 48, 7314, 10.1021/ie9005244
Fan, 2014, Dynamic CO2 adsorption performance of internally cooled silica-supported poly (ethylenimine) hollow fiber sorbents, AIChE J, 60, 3878, 10.1002/aic.14615
Rezaei, 2010, Structured adsorbents in gas separation processes, Sep. Purif. Technol., 70, 243, 10.1016/j.seppur.2009.10.004
Quan, 2022, Scalable formation of diamine-appended metal–organic framework hollow fiber sorbents for postcombustion CO2 capture, JACS Au, 10.1021/jacsau.2c00029
Férey, 2005, A chromium terephthalate-based solid with unusually large pore volumes and surface area, Science, 309, 2040, 10.1126/science.1116275
Zhao, 2015, High-yield, fluoride-free and large-scale synthesis of MIL-101 (Cr), Dalton Trans., 44, 16791, 10.1039/C5DT02625C
DeWitt, 2022, MIL-101 (Cr) Polymeric Fiber Adsorbents for Sub-Ambient Post-Combustion CO2 Capture, Ind. Eng. Chem. Res., 61, 13612, 10.1021/acs.iecr.2c01837
Walton, 2007, Applicability of the BET method for determining surface areas of microporous metal− organic frameworks, J. Am. Chem. Soc., 129, 8552, 10.1021/ja071174k
Kulkarni, 2012, Analysis of equilibrium-based TSA processes for direct capture of CO2 from air, Ind. Eng. Chem. Res., 51, 8631, 10.1021/ie300691c
Lebedev, 2005, First direct imaging of giant pores of the metal− organic framework MIL-101, Chem. Mater., 17, 6525, 10.1021/cm051870o
Belmabkhout, 2010, Amine-bearing mesoporous silica for CO2 removal from dry and humid air, Chem. Eng. Sci., 65, 3695, 10.1016/j.ces.2010.02.044
Didas, 2014, Effect of amine surface coverage on the co-adsorption of CO2 and water: spectral deconvolution of adsorbed species, The Journal of Physical Chemistry Letters, 5, 4194, 10.1021/jz502032c
Belmabkhout, 2010, Adsorption of CO2-containing gas mixtures over amine-bearing pore-expanded MCM-41 silica: application for gas purification, Ind. Eng. Chem. Res., 49, 359, 10.1021/ie900837t
Goeppert, 2011, Carbon dioxide capture from the air using a polyamine based regenerable solid adsorbent, J. Am. Chem. Soc., 133, 20164, 10.1021/ja2100005
Wiegner, 2022, Optimal Design and Operation of Solid Sorbent Direct Air Capture Processes at Varying Ambient Conditions, Ind. Eng. Chem. Res., 61, 12649, 10.1021/acs.iecr.2c00681