A promising energy storage system: rechargeable Ni–Zn battery

Rare Metals - Tập 36 - Trang 381-396 - 2017
Shi-Bin Lai1, Mohammed-Ibrahim Jamesh2,3, Xiao-Chao Wu1,4, Ya-Lan Dong5, Jun-Hao Wang5, Maryann Gao1,6, Jun-Feng Liu1, Xiao-Ming Sun5
1State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, China
2Department of Physics and Materials Science, City University of Hong Kong, Kowloon, China
3Applied and Plasma Physics, School of Physics (A28), University of Sydney, Sydney, Australia
4Fundamental Electrochemistry (IEK-9), Forschungszentrum Juelich, Juelich, Germany
5State Key Laboratory of Chemical Resource Engineering, College of Energy, Beijing Advanced Innovation Centre for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing, China
6Northwood High School, Irvine, USA

Tóm tắt

The sharp depletion of fossil fuel resources and its associated increasingly deteriorated environmental pollution are vital challenging energy issues, which are one of the most crucial research hot spots in the twenty-first century. Rechargeable Ni–Zn batteries (RNZBs), delivering high power density in aqueous electrolytes with stable cycle performance, are expected to be promising candidates to alleviate the current energy and environmental problems, and play an important role in green power sources. Many efforts have been focused on the investigations and improvements of RNZBs in recent decades, and it is necessary to summarize and review the achievements and challenges in this advancing field. In this paper, we review various batteries, compare and highlight the advantages of RNZBs, and introduce the recent advances in the development of electrode materials and electrolytes of RNZBs, especially the applications of novel nanostructured materials for the active electrodes. Some prospective investigation trends of RNZBs are also proposed and discussed.

Tài liệu tham khảo

Winter M, Brodd RJ. What are batteries, fuel cells, and supercapacitors? Chem Rev. 2005;105(3):1021.

Kudo A, Miseki Y. Heterogeneous photocatalyst materials for water splitting. Chem Soc Rev. 2009;38(1):253.

Etacheri V, Marom R, Elazari R, Salitra G, Aurbach D. Challenges in the development of advanced Li-ion batteries: a review. Energy Environ Sci. 2011;4(9):3243.

Wang W, Tade MO, Shao ZP. Research progress of perovskite materials in photocatalysis- and photovoltaics-related energy conversion and environmental treatment. Chem Soc Rev. 2015;44(15):5371.

Lu L, Yang HX, Burnett J. Investigation on wind power potential on Hong Kong islands—an analysis of wind power and wind turbine characteristics. Renew Energy. 2002;27(1):1.

Chow TT, Pei G, Fong KF, Lin Z, Chan ALS, He M. Modeling and application of direct-expansion solar-assisted heat pump for water heating in subtropical Hong Kong. Appl Energy. 2010;87(2):643.

Nazeeruddin MK, Baranoff E, Gratzel M. Dye-sensitized solar cells: a brief overview. Sol Energy. 2011;85(6):1172.

Tachan Z, Ruhle S, Zaban A. Dye-sensitized solar tubes: a new solar cell design for efficient current collection and improved cell sealing. Sol Energy Mater Sol Cells. 2010;94(2):317.

Goodenough JB, Kim Y. Challenges for rechargeable Li batteries. Chem Mater. 2010;22(3):587.

Phillips J, Mohanta S, Geng M, Barton J, McKinney B, Wu J. Environmentally friendly nickel–zinc battery for high rate application with higher specific energy. ECS Trans. 2009;16(16):11.

Armand M, Tarascon JM. Building better batteries. Nature. 2008;451(7179):652.

Chau K, Wong Y, Chan C. An overview of energy sources for electric vehicles. Energy Convers Manag. 1999;40(10):1021.

Tarascon JM, Armand M. Issues and challenges facing rechargeable lithium batteries. Nature. 2001;414(6861):359.

Goodenough JB, Kim Y. Challenges for rechargeable batteries. J Power Sources. 2011;196(16):6688.

Cheng FY, Liang J, Tao ZL, Chen J. Functional materials for rechargeable batteries. Adv Mater. 2011;23(15):1695.

Ding YL, Wen Y, Wu C, van Aken PA, Maier J, Yu Y. 3D V6O13 nanotextiles assembled from interconnected nanogrooves as cathode materials for high-energy lithium ion batteries. Nano Lett. 2015;15(2):1388.

Liu S, Pan GL, Yan NF, Gao XP. Aqueous TiO2/Ni(OH)2 rechargeable battery with a high voltage based on proton and lithium insertion/extraction reactions. Energy Environ Sci. 2010;3(11):1732.

Wang C, Wu L, Wang H, Zuo W, Li Y, Liu J. Fabrication and shell optimization of synergistic TiO2–MoO3 core–shell nanowire array anode for high energy and power density lithium-ion batteries. Adv Funct Mater. 2015;25(23):3524.

Fan X, Luo C, Lamb J, Zhu Y, Xu K, Wang C. PEDOT encapsulated FeOF nanorod cathodes for high energy lithium-ion batteries. Nano Lett. 2015;15(11):7650.

Xie H, Du K, Hu G, Peng Z, Cao Y. The role of sodium in LiNi0.8Co0.15Al0.05O2 cathode material and its electrochemical behaviors. J Phys Chem C. 2016;120(6):3235.

Zhu L, Liu Y, Wu W, Wu X, Tang W, Wu Y. Surface fluorinated LiNi0.8Co0.15Al0.05O2 as a positive electrode material for lithium ion batteries. J Mater Chem A. 2015;3(29):15156.

Lee DU, Fu J, Park MG, Liu H, Kashkooli AG, Chen ZW. Self-assembled NiO/Ni(OH)2 nanoflakes as active material for high-power and high-energy hybrid rechargeable battery. Nano Lett. 2016;16(3):1794.

Wang H, Liang Y, Gong M, Li Y, Chang W, Mefford T, Zhou J, Wang J, Regier T, Wei F, Dai H. An ultrafast nickel-iron battery from strongly coupled inorganic nanoparticle/nanocarbon hybrid materials. Nat Commun. 2012;3(2):177.

Zeng Y, Lin Z, Meng Y, Wang Y, Yu M, Lu X, Tong Y. Flexible ultrafast aqueous rechargeable Ni//Bi battery based on highly durable single-crystalline bismuth nanostructured anode. Adv Mater. 2016;28(41):9188.

Tang W, Hou YY, Wang FX, Liu LL, Wu YP, Zhu K. LiMn2O4 nanotube as cathode material of second-level charge capability for aqueous rechargeable batteries. Nano Lett. 2013;13(5):2036.

Pan H, Shao Y, Yan P, Cheng Y, Han KS, Nie Z, Wang C, Yang J, Li X, Bhattacharya P, Mueller KT, Liu J. Reversible aqueous zinc/manganese oxide energy storage from conversion reactions. Nature Energy. 2016;1(5):16039.

Manthiram A. Materials challenges and opportunities of lithium-ion batteries. J Phys Chem Lett. 2011;2(3):176.

Whittingham M. Lithium batteries and cathode materials. Chem Rev. 2004;104(10):4271.

Zhu WH, Zhu Y, Davis Z, Tatarchuk BJ. Energy efficiency and capacity retention of Ni–MH batteries for storage applications. Appl Energy. 2013;106(11):307.

Lu LG, Han XB, Li JQ, Hua JF, Ouyang MG. A review on the key issues for lithium-ion battery management in electric vehicles. J Power Sources. 2013;226(3):272.

Wang HL, Cui LF, Yang YA, Casalongue HS, Robinson JT, Liang YY, Cui Y, Dai HJ. Mn3O4–graphene hybrid as a high-capacity anode material for lithium ion batteries. J Am Chem Soc. 2010;132(40):13978.

Todd ADW, Ferguson PP, Fleischauer MD, Dahn JR. Tin-based materials as negative electrodes for Li-ion batteries: combinatorial approaches and mechanical methods. Int J Energy Res. 2010;34(6):535.

Song MK, Cairns EJ, Zhang Y. Lithium/sulfur batteries with high specific energy: old challenges and new opportunities. Nanoscale. 2013;5(6):2186.

Manthiram A, Fu Y, Su YS. Challenges and prospects of lithium–sulfur batteries. Acc Chem Res. 2013;46(5):1125.

Choi YJ, Kim KW, Ahn HJ, Ahn JH. Improvement of cycle property of sulfur electrode for lithium/sulfur battery. J Alloys Compd. 2008;449(1–2):313.

Cheon SE, Ko KS, Cho JH, Kim SW, Chin EY, Kim HT. Rechargeable lithium sulfur battery-I. Structural change of sulfur cathode during discharge and charge. J Electrochem Soc. 2003;150(6):A796.

Ryu HS, Guo ZP, Ahn HJ, Cho GB, Liu HK. Investigation of discharge reaction mechanism of lithium vertical bar liquid electrolyte vertical bar sulfur battery. J Power Sources. 2009;189(2):1179.

Bruce PG, Freunberger SA, Hardwick LJ, Tarascon JM. Li–O2 and Li–S batteries with high energy storage. Nat Mater. 2012;11(1):19.

Ruggeri S, Roue L. Correlation between charge input and cycle life of MgNi electrode for Ni–MH batteries. J Power Sources. 2003;117(1–2):260.

Liu Y, Pan H, Gao M, Wang Q. Advanced hydrogen storage alloys for Ni/MH rechargeable batteries. J Mater Chem. 2011;21(13):4743.

Feng F, Northwood DG. Effect of surface modification on the performance of negative electrodes in Ni/MH batteries. Int J Hydrogen Energy. 2004;29(9):955.

Ruiz FC, Castro EB, Real SG, Peretti HA, Visintin A, Triaca WE. Electrochemical characterization of AB2 alloys used for negative electrodes in Ni/MH batteries. Int J Hydrogen Energy. 2008;33(13):3576.

Feng F, Geng M, Northwood DO. Electrochemical behaviour of intermetallic-based metal hydrides used in Ni/metal hydride (MH) batteries: a review. Int J Hydrogen Energy. 2001;26(7):725.

Chan CC, Lo EWC, Shen W. The available capacity computation model based on artificial neural network for lead–acid batteries in electric vehicles. J Power Sources. 2000;87(1):201.

Zhang K, Liu W, Ma BB, Mezaal MA, Li GH, Zhang R, Lei LX. Lead sulfate used as the positive active material of lead acid batteries. J Solid State Electrochem. 2016;20(8):2267.

Durr M, Cruden A, Gair S, McDonald JR. Dynamic model of a lead acid battery for use in a domestic fuel cell system. J Power Sources. 2006;161(2):1400.

Coates D, Ferreira E, Charkey A. An improved nickel/zinc battery for ventricular assist systems. J Power Sources. 1997;65(1):109.

Wang GJ, Fu LJ, Zhao NH, Yang LC, Wu YP, Wu HQ. An aqueous rechargeable lithium battery with good cycling performance. Angew Chem Int Ed. 2007;46(1–2):295.

Liu J, Guan C, Zhou C, Fan Z, Ke Q, Zhang G, Liu C, Wang J. A flexible quasi-solid-state nickel–zinc battery with high energy and power densities based on 3D electrode design. Adv Mater. 2016;28(39):8732.

Yang B, Yang ZH. Structure and improved electrochemical performance of a nanostructured layered double hydroxide-carbon nanotube composite as a novel anode material for Ni–Zn secondary batteries. RSC Adv. 2013;3(31):12589.

Yang JL, Yuan YF, Wu HM, Li Y, Chen YB, Guo SY. Preparation and electrochemical performances of ZnO nanowires as anode materials for Ni/Zn secondary battery. Electrochim Acta. 2010;55(23):7050.

Ma M, Tu JP, Yuan YF, Wang XL, Li KF, Mao F, Zeng ZY. Electrochemical performance of ZnO nanoplates as anode materials for Ni/Zn secondary batteries. J Power Sources. 2008;179(1):395.

Yuan Y, Tu J, Wu H. Size and morphology effects of ZnO anode nanomaterials for Zn/Ni secondary batteries. Nanotechnology. 2005;16(6):803.

Geng M, Northwood DO. Development of advanced rechargeable Ni/MH and Ni/Zn batteries. Int J Hydrogen Energy. 2003;28(6):633.

Xu C, Liao J, Yang C, Wang R, Wu D, Zou P, Lin Z, Li B, Kang F, Wong CP. An ultrafast, high capacity and superior longevity Ni/Zn battery constructed on nickel nanowire array film. Nano Energy. 2016;30:900.

Hu P, Wang T, Zhao J, Zhang C, Ma J, Du H, Wang X, Cui G. Ultrafast alkaline Ni/Zn battery based on Ni-foam-supported Ni3S2 nanosheets. ACS Appl Mater Interfaces. 2015;7(48):26396.

Fan XM, Yang ZH, Wen RJ, Yang B, Long W. The application of Zn–Al-hydrotalcite as a novel anodic material for Ni–Zn secondary cells. J Power Sources. 2013;224(4):80.

Yang Q, Lu ZY, Liu JF, Lei XD, Chang Z, Luo L, Sun XM. Metal oxide and hydroxide nanoarrays: hydrothermal synthesis and applications as supercapacitors and nanocatalysts. Prog Nat Sci. 2013;23(4):351.

Yuan CZ, Wu HB, Xie Y, Lou XW. Mixed transition-metal oxides: design, synthesis, and energy-related applications. Angew Chem Int Ed. 2014;53(6):1488.

Xu QS, Zhu YJ, Huang LG, Luo J, Zhang ZJ, Miao CC, Ye H. Phase and particle of Y-doped Ni(OH)2 prepared from different nickel sources and Na2CO3 amount. Rare Met. 2014;33(2):219.

Kang S, Im Y, Park KS, Cho TW, Jeon J, Chung K, Kang M. The incorporation of Cr ions into the framework of ZnO for stable electrochemical performance in a membrane free alkaline Ni/Zn redox. Electrochim Acta. 2016;209:623.

Joshi RK, Schneider JJ. Assembly of one dimensional inorganic nanostructures into functional 2D and 3D architectures. Synthesis, arrangement and functionality. Chem Soc Rev. 2012;41(15):5285.

Wang GP, Zhang L, Zhang JJ. A review of electrode materials for electrochemical supercapacitors. Chem Soc Rev. 2012;41(2):797.

Chan CK, Peng HL, Liu G, McIlwrath K, Zhang XF, Huggins RA, Cui Y. High-performance lithium battery anodes using silicon nanowires. Nat Nanotechnol. 2008;3(1):31.

Cao MH, He XY, Chen J, Hu CW. Self-assembled nickel hydroxide three-dimensional nanostructures: a nanomaterial for alkaline rechargeable batteries. Cryst Growth Des. 2007;7(1):170.

Li YG, Dai HJ. Recent advances in zinc–air batteries. Chem Soc Rev. 2014;43(15):5257.

Yuan YF, Tu JP, Wu HM, Yang YZ, Shi DQ, Zhao XB. Electrochemical performance and morphology evolution of nanosized ZnO as anode material of Ni–Zn batteries. Electrochim Acta. 2006;51(18):3632.

Ghavami RK, Rafiei Z, Tabatabaei SM. Effects of cationic CTAB and anionic SDBS surfactants on the performance of Zn–MnO2 alkaline batteries. J Power Sources. 2007;164(2):934.

Lee JS, Kim ST, Cao R, Choi NS, Liu M, Lee KT, Cho J. Metal–air batteries with high energy density: Li–air versus Zn–air. Adv Energy Mater. 2011;1(1):34.

Kim H, Jeong G, Kim YU, Kim JH, Park CM, Sohn HJ. Metallic anodes for next generation secondary batteries. Chem Soc Rev. 2013;42(23):9011.

Yuan YF, Li Y, Tao S, Ye FC, Yang JL, Guo SY, Tu JP. Preparation and electrochemical performance of nanosized Bi compounds-modified ZnO for Zn/Ni secondary cell. Electrochim Acta. 2009;54(26):6617.

Zheng Y, Wang JM, Chen H, Zhang JQ, Cao CN. Effects of barium on the performance of secondary alkaline zinc electrode. Mater Chem Phys. 2004;84(1):99.

Yuan YF, Tu JP, Wu HM, Li Y, Shi DQ, Zhao XB. Effect of ZnO nanomaterials associated with Ca(OH)2 as anode material for Ni–Zn batteries. J Power Sources. 2006;159(1):357.

Wang SW, Yang ZH, Zeng LH. Effect of surface modification with In(OH)3 on electrochemical performance of calcium zincate. J Electrochem Soc. 2008;156(1):A18.

Huang J, Yang Z, Wang T. Evaluation of tetraphenylporphyrin modified ZnO as anode material for Ni–Zn rechargeable battery. Electrochim Acta. 2014;123(10):278.

Lee SM, Kim YJ, Eom SW, Choi NS, Kim KW, Cho SB. Improvement in self-discharge of Zn anode by applying surface modification for Zn–air batteries with high energy density. J Power Sources. 2013;227:177.

Yuan YF, Tu JP, Wu HM, Zhang CQ, Wang SF, Zhao XB. Influence of surface modification with Sn6O4(OH)4 on electrochemical performance of ZnO in Zn/Ni secondary cells. J Power Sources. 2007;165(2):905.

Zeng D, Yang Z, Wang S, Ni X, Ai D, Zhang Q. Preparation and electrochemical performance of In-doped ZnO as anode material for Ni–Zn secondary cells. Electrochim Acta. 2011;56(11):4075.

Yang B, Yang ZH, Wang RJ. Facile synthesis of novel two-dimensional silver-coated layered double hydroxide nanosheets as advanced anode material for Ni–Zn secondary batteries. J Power Sources. 2014;251:14.

Yang B, Yang Z, Wang R, Wang T. Layered double hydroxide/carbon nanotubes composite as a high performance anode material for Ni–Zn secondary batteries. Electrochim Acta. 2013;111(6):581.

Fan XM, Yang ZH, Long W, Zhao ZY, Yang B. The preparation and electrochemical performance of In(OH)3-coated Zn–Al-hydrotalcite as anode material for Zn–Ni secondary cell. Electrochim Acta. 2013;92:365.

Parker JF, Nelson ES, Wattendorf MD, Chervin CN, Long JW, Rolison DR. Retaining the 3D framework of zinc sponge anodes upon deep discharge in Zn–air cells. ACS Appl Mater Interfaces. 2014;6(22):19471.

Wang RJ, Yang ZH, Yang B, Wang TT, Chu ZH. Superior cycle stability and high rate capability of Zn–Al–In-hydrotalcite as negative electrode materials for Ni–Zn secondary batteries. J Power Sources. 2014;251:344.

Huang JH, Yang ZH, Wang RJ, Zhang Z, Feng ZB, Xie XE. Zn–Al layered double oxides as high-performance anode materials for zinc-based secondary battery. J Mater Chem A. 2015;3(14):7429.

Wang TT, Yang ZH, Yang B, Wang RJ, Huang JH. The electrochemical performances of Zn–Sn–Al-hydrotalcites in Zn–Ni secondary cells. J Power Sources. 2014;257(3):174.

Long J, Yang ZH, Zeng X, Huang JH. A new class of nanocomposites of Zn–Al–Bi layered double oxides: large reversible capacity and better cycle performance for alkaline secondary batteries. RSC Adv. 2016;6(95):92896.

Wang R, Yang Z, Yang B, Fan X, Wang T. A novel alcohol-thermal synthesis method of calcium zincates negative electrode materials for Ni–Zn secondary batteries. J Power Sources. 2014;246(3):313.

Moser F, Fourgeot F, Rouget R, Crosnier O, Brousse T. In situ X-ray diffraction investigation of zinc based electrode in Ni–Zn secondary batteries. Electrochim Acta. 2013;109(11):110.

Lee SH, Yi CW, Kim K. Characteristics and electrochemical performance of the TiO2-coated ZnO anode for Ni–Zn secondary batteries. J Phys Chem C. 2011;115(5):2572.

Zhao T, Shangguan E, Li Y, Li J, Chang Z, Li Q, Yuan XZ, Wang H. Facile synthesis of high tap density ZnO microspheres as advanced anode material for alkaline nickel–zinc rechargeable batteries. Electrochim Acta. 2015;182:173.

Hochbaum AI, Yang PD. Semiconductor nanowires for energy conversion. Chem Rev. 2010;110(1):527.

Yang GW, Xu CL, Li HL. Electrodeposited nickel hydroxide on nickel foam with ultrahigh capacitance. Chem Commun. 2008;48:6537.

Wang Q, O’Hare D. Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets. Chem Rev. 2012;112(7):4124.

Mureşan L, Maurin G, Oniciu L, Avram S. Effects of additives on zinc electrowinning from industrial waste products. Hydrometallurgy. 1996;40(3):335.

Gu P, Pascual R, Shirkhanzadeh M, Saimoto S, Scott J. The influence of Al substrate intermetallic precipitates on zinc electrodeposition. Hydrometallurgy. 1995;37(3):267.

Liu YZ, Yang ZH, Xie XE, Huang JH, Wen X. Layered double oxides nano-flakes derived from layered double hydroxides: preparation, properties and application in zinc/nickel secondary batteries. Electrochim Acta. 2015;185:190.

Shaigan N, Qu W, Takeda T. Morphology control of electrodeposited zinc from alkaline zincate solutions for rechargeable zinc air batteries. ECS Trans. 2010;28(32):35.

Adler TC, McLarnon FR, Cairns EJ. Investigations of a new family of alkaline–fluoride–carbonate electrolytes for zinc/nickel oxide cells. Ind Eng Chem Res. 1998;37(8):3237.

Mclarnon FR, Cairns EJ. The secondary alkaline zinc electrode. J Electrochem Soc. 1991;138(2):355.

Dzieciuch MA, Gupta N, Wroblowa HS. Rechargeable cells with modified MnO2 cathodes. J Electrochem Soc. 1988;135(10):2415.

Lan CJ, Lee CY, Chin TS. Tetra-alkyl ammonium hydroxides as inhibitors of Zn dendrite in Zn-based secondary batteries. Electrochim Acta. 2007;52(17):5407.

Ein-Eli Y, Auinat M. The behavior of zinc metal in alkaline solution containing organic inhibitors. J Electrochem Soc. 2003;150(12):A1606.

Banik SJ, Akolkar R. Suppressing dendritic growth during alkaline zinc electrodeposition using polyethylenimine additive. Electrochim Acta. 2015;179:475.

Xu M, Ivey DG, Qu W, Xie Z. Study of the mechanism for electrodeposition of dendrite-free zinc in an alkaline electrolyte modified with 1-ethyl-3-methylimidazolium dicyanamide. J Power Sources. 2015;274:1249.

Banik SJ, Akolkar R. Suppressing dendrite growth during zinc electrodeposition by PEG-200 additive. J Electrochem Soc. 2013;160(11):D519.

Shivkumar R, Kalaignan GP, Vasudevan T. Effect of additives on zinc electrodes in alkaline battery systems. J Power Sources. 1995;55(1):53.

Hu CC, Chang CY. Anodic stripping of zinc deposits for aqueous batteries: effects of anions, additives, current densities, and plating modes. Mater Chem Phys. 2004;86(1):195.

Zhang XG. Secondary batteries-zinc systems. Zinc electrodes: overview. Encycl Electrochem Power Sources. 2009;15(7):454.

Cheng HH, Tan CS. Reduction of CO2 concentration in a zinc/air battery by absorption in a rotating packed bed. J Power Sources. 2006;162(2):1431.

Moon KM, Lee MH, Kim KJ, Park KW. The effect of additives on the corrosion resistance of Zn electrode in alkaline battery system. Met Mater Int. 2005;11(3):221.

Li LF. Non-toxic alkaline electrolyte with additives for rechargeable zinc cells. US patent. 201000623327.2010.

Lee CW, Sathiyanarayanan K, Eom SW, Kim HS, Yun MS. Novel electrochemical behavior of zinc anodes in zinc/air batteries in the presence of additives. J Power Sources. 2006;159(2):1474.

Aaboubi O, Douglade J, Abenaqui X, Boumedmed R, VonHoff J. Influence of tartaric acid on zinc electrodeposition from sulphate bath. Electrochim Acta. 2011;56(23):7885.

Mainar AR, Leonet O, Bengoechea M, Boyano I, Meatza I, Kvasha A, Guerfi A, Blazquez JA. Alkaline aqueous electrolytes for secondary zinc-air batteries: an overview. Int J Energy Res. 2016;40(8):1032.

Liu Z, Cui T, Pulletikurthi G, Lahiri A, Carstens T, Olschewski M, Endres F. Dendrite-free nanocrystalline zinc electrodeposition from an ionic liquid containing nickel triflate for rechargeable Zn-based batteries. Angew Chem Int Ed. 2016;55(8):2889.

Jorné J, Adler TC, Cairns EJ. Visual observations of early shape changes in a zinc/nickel oxide cell. J Electrochem Soc. 1995;142(3):771.

Mohamad AA, Mohamed NS, Yahya MZA, Othman R, Ramesh S, Alias Y, Arof AK. Ionic conductivity studies of poly(vinyl alcohol) alkaline solid polymer electrolyte and its use in nickel–zinc cells. Solid State Ionics. 2003;156(1–2):171.

Iwakura C, Murakami H, Nohara S, Furukawa N, Inoue H. Charge–discharge characteristics of nickel/zinc battery with polymer hydrogel electrolyte. J Power Sources. 2005;152(1):291.

Shao MF, Zhang RK, Li ZH, Wei M, Evans DG, Duan X. Layered double hydroxides toward electrochemical energy storage and conversion: design, synthesis and applications. Chem Commun. 2015;51(88):15880.

He WX, Zhang YQ, Liang QQ, Jiang WQ, Sun HF. Hydrothermal synthesis and characterization of nano-petal nickel hydroxide. Rare Met. 2015;34(9):667.

Watanabe K, Kikuoka T, Kumagai N. Physical and electrochemical characteristics of nickel hydroxide as a positive material for rechargeable alkaline batteries. J Appl Electrochem. 1995;25(3):219.

He XM, Pu WH, Cheng HW, Jiang CY, Wan CR. Granulation of nano-scale Ni(OH)2 cathode materials for high power Ni–MH batteries. Energy Convers Manag. 2006;47(13):1879.

Jayashree RS, Kamath PV. Layered double hydroxides of Ni with Cr and Mn as candidate electrode materials for alkaline secondary cells. J Power Sources. 2002;107(1):120.

Gong M, Li Y, Zhang H, Zhang B, Zhou W, Feng J, Wang H, Liang Y, Fan Z, Liu J, Dai H. Ultrafast high-capacity NiZn battery with NiAlCo-layered double hydroxide. Energy Environ Sci. 2014;7(6):2025.

Zhi MJ, Xiang CC, Li JT, Li M, Wu NQ. Nanostructured carbon-metal oxide composite electrodes for supercapacitors: a review. Nanoscale. 2013;5(1):72.

Yu GH, Xie X, Pan LJ, Bao ZN, Cui Y. Hybrid nanostructured materials for high-performance electrochemical capacitors. Nano Energy. 2013;2(2):213.

Guan C, Liu JP, Cheng CW, Li HX, Li XL, Zhou WW, Zhang H, Fan HJ. Hybrid structure of cobalt monoxide nanowire @ nickel hydroxidenitrate nanoflake aligned on nickel foam for high-rate supercapacitor. Energy Environ Sci. 2011;4(11):4496.

Zhou WJ, Cao XH, Zeng ZY, Shi WH, Zhu YY, Yan QY, Liu H, Wang JY, Zhang H. One-step synthesis of Ni3S2 nanorod@Ni(OH)2 nanosheet core-shell nanostructures on three-dimensional graphene network for high-performance supercapacitors. Energy Environ Sci. 2013;6(7):2216.

Lai XY, Halpert JE, Wang D. Recent advances in micro-/nano-structured hollow spheres for energy applications: from simple to complex systems. Energy Environ Sci. 2012;5(2):5604.

Cao HQ, Zheng H, Liu KY, Warner JH. Bioinspired peony-like β-Ni(OH)2 nanostructures with enhanced electrochemical activity and superhydrophobicity. ChemPhysChem. 2010;11(2):489.

Zhang WK, Xia XH, Huang H, Gan YP, Wu JB, Tu JP. High-rate discharge properties of nickel hydroxide/carbon composite as positive electrode for Ni/MH batteries. J Power Sources. 2008;184(2):646.

Lu ZY, Wu XC, Lei XD, Li YP, Sun XM. Hierarchical nanoarray materials for advanced nickel–zinc batteries. Inorg Chem Front. 2015;2(2):184.

Yun YH, Dong ZG, Shanov VN, Schulz MJ. Electrochemical impedance measurement of prostate cancer cells using carbon nanotube array electrodes in a microfluidic channel. Nanotechnology. 2007;18(46):5721.

Liu F, Piao Y, Choi KS, Seo TS. Fabrication of free-standing graphene composite films as electrochemical biosensors. Carbon. 2012;50(1):123.

Sheng QL, Wang MZ, Zheng JB. A novel hydrogen peroxide biosensor based on enzymatically induced deposition of polyaniline on the functionalized graphene–carbon nanotube hybrid materials. Sens Actuators B Chem. 2011;160(1):1070.

Liu J, Chen M, Zhang L, Jiang J, Yan J, Huang Y, Lin J, Fan HJ, Shen ZX. A flexible alkaline rechargeable Ni/Fe battery based on graphene foam/carbon nanotubes hybrid film. Nano Lett. 2014;14(12):7180.

Thông tin
Thông tin xuất bản

Rare Metals

Tập 36

381-396

Thông tin tác giả