A progressive comparison of the novel pulse and conventional steady state methods of measuring the airtightness of buildings

Energy and Buildings - Tập 261 - Trang 111983 - 2022
X.F. Zheng1,2, Y.S. Hsu1, A.V. Pasos1, L. Smith3, C.J. Wood1
1Buildings, Energy and Environment Research Group, Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, UK
2School of Built Environment, Engineering and Computing, Leeds Beckett University, Leeds, LS1 3HE, UK
3Build Test Solutions Ltd., 16 St Johns Business Park, Lutterworth LE17 4HB, UK

Tài liệu tham khảo

Lombard, 2008, A review on buildings energy consumption information, Energy and Buildings, 40, 394, 10.1016/j.enbuild.2007.03.007

International Energy Agency, 2013. Transition to Sustainable Buildings-Strategies and Opportunities to 2050 Available from: http://www.iea.org/Textbase/npsum/building2013SUM.pdf.

S.J. Emmerich, et al. Impact of infiltration on heating and cooling loads in U.S. office buildings, Department of Energy, Office of Building Technologies. Agreement No. DE-AI01-01EE27615.

Jokisalo, 2009, Building Leakage, infiltration, and energy performance analyses for Finnish detached houses, Build. Environ., 44, 377, 10.1016/j.buildenv.2008.03.014

Department for Business, Energy & Industrial Strategy. Energy consumption in the UK (ECUK) 1970 to 2018, National Statistics, 25 July 2019.

Etheridge, 2015, A perspective on fifty years of natural ventilation research, Build. Environ., 91, 51, 10.1016/j.buildenv.2015.02.033

Zheng, 2020, A practical review of alternatives to the steady pressurisation method for determining building airtightness, Renewable Sustain. Energy Rev.

Sherman, 1989, Uncertainty in air flow calculations using tracer gas measurements, Build. Environ., 24, 347, 10.1016/0360-1323(89)90029-2

American Society for Testing and Materials. Standard Test Method for Determining Air change in a Single Zone by Means of Tracer Gas Dilution, ASTM designation E741-11, 2011.

Pasos, 2020, Estimation of the infiltration rate of UK homes with the divide-by-20 rule and its comparison with site measurements, Build. Environ., 185

Blomsterberg, 1979, A model correlating air tightness and air infiltration in houses

Dols, 2000

Sherman, 1980

Walker, 1990

Almeida, 2017, A contribution to the quantification of the influence of windows on the tightness of buildings in southern Europe, Energy Build., 139, 174, 10.1016/j.enbuild.2017.01.012

Etheridge, 1996

Vinha, 2015, Airtightness of residential buildings in Finland, Build. Environ., 93, 128, 10.1016/j.buildenv.2015.06.011

Munoz, 2019, Airtightness of residential buildings in the continental area of Spain, Build. Environ., 148, 299, 10.1016/j.buildenv.2018.11.010

M.H. Sherman, D.T. Grimsrud, R.C. Sonderegger. The low pressure leakage function of a building LBL-9162, EEB-Env-79-10.

Siren, 1997, A modification of the power law equation to account for large-scale wind turbulence, 557

Cooper, 2007, Determining the adventitious leakage of buildings at low pressure. Part 2, Eng. Res. Technol, 28, 81

Modera, 1990, The Effects of wind on residential building leakage measurements, 132

Sherman, 2004

Sandberg, 2015, Viewpoints on wind and air infiltration phenomena at buildings illustrated by field and model studies, Build. Environ., 92, 504, 10.1016/j.buildenv.2015.05.001

Modera, 1991, 2009

Pasos, 2019, Experimental study on the pressure differential at which building air leakage should be measured

Cooper, 2016, Field trialling of a new airtightness tester in a range of UK homes, Int. J. Ventilation

Cooper, 2007, Determining the adventitious leakage of buildings at low pressure. Part 1: uncertainties, Building Serv. Eng. Res. Technol., 28, 71, 10.1177/0143624406072330

Wood, 2018, An extended pressure range comparison of the blower door and novel pulse method for measuring the airtightness of two outdoor chambers with different levels of airtightness

Cooper, 2014, A nozzle pulse pressurisation technique for measurement of building leakage at low pressure

Cooper, 2020, Numerical and experimental validations of the theoretical basis for a nozzle based pulse technique for determining building airtightness, Build. Environ., 107459

Hsu, 2019, Evaluation of indoor pressure distributions in a detached house using the Pulse airtightness measurement technique

Hsu, 2021, Evaluation of indoor pressure distributions in a detached house using the Pulse airtightness measurement technique, Build. Environ., 107742, 10.1016/j.buildenv.2021.107742

Zheng, 2017, A comparison study of the blower door and novel pulse technique on measuring enclosure airtightness in a controlled environment

Zheng, 2018, Experimental study of enclosure airtightness of an outdoor chamber using the pulse technique and blower door method under various leakage and wind conditions, 352

Zheng, 2020, Airtightness measurement of an outdoor chamber using the Pulse and blower door methods under various wind and leakage scenarios, Build. Environ

Zheng, 2019, Experimental insights into the airtightness measurement of a house-sized chamber in a sheltered environment using blower door and pulse methods, Build. Environ., 10.1016/j.buildenv.2019.106269

Zheng, 2019, Refined assessment and comparison of airtightness measurement of indoor chambers using the blower door and Pulse methods

Zheng, 2019, Experimental studies of a pulse pressurisation technique for measuring building airtightness, Future Cities Environ., 5, 1, 10.5334/fce.66

Zheng, 2020, On the power law and quadratic forms for representing the leakage-pressure relationship - Case studies of sheltered chambers, Energy Build., 10.1016/j.enbuild.2020.110380

M. Sherman. Uncertainties in fan pressurisation measurements, Airflow Performance Conference 10/93 LBL-32115.

BS EN ISO 9972. Thermal performance of buildings-Determination of air permeability of buildings-Fan pressurisation method, BSI Standards Publication (2015).

Moujalled, 2021, Mid-term and long-term changes in building airtightness: a field study on low-energy houses, Energy Build., 250, 111257, 10.1016/j.enbuild.2021.111257

Carrie, 2016, Uncertainties in building pressurisation tests due to steady wind, Energy Build., 116, 656, 10.1016/j.enbuild.2016.01.029

Thông tin
Thông tin xuất bản

Energy and Buildings

Tập 261

111983

Thông tin tác giả