A comprehensive review of tire-pavement noise: Generation mechanism, measurement methods, and quiet asphalt pavement

Journal of Cleaner Production - Tập 287 - Trang 125056 - 2021
Senlin Ling1, Fan Yu2, Daquan Sun1, Guoqiang Sun3, Lei Xu1
1Key Laboratory of Road and Traffic Engineering of Ministry of Education, Tongji University, Shanghai, 200092, PR China
2College of Civil Engineering and Architecture, China Three Gorges University, Yichang 443002, China
3Department of Road and Railway Engineering, Beijing University of Technology, Beijing 100124, PR China

Tài liệu tham khảo

2003

Akbari, 2001

Al-Rubaei, 2013, Long-term hydraulic performance of porous asphalt pavements in northern Sweden, J. Irrigat. Drain. Eng., 139, 499, 10.1061/(ASCE)IR.1943-4774.0000569

Alber, 2018, Influence of soiling phenomena on air-void microstructure and acoustic performance of porous asphalt pavement, Construct. Build. Mater., 158, 938, 10.1016/j.conbuildmat.2017.10.069

Allard, 1993

Altreuther, 2018

Alvarez, 2009, Determination of volumetric properties for permeable friction course mixtures, J. Test. Eval., 37, 1

Amarasiri, 2012, Use of digital image modeling for evaluation of concrete pavement macrotexture and wear, J. Transport. Eng., 138, 589, 10.1061/(ASCE)TE.1943-5436.0000347

2014

Amundsen, 2005

Anfosso-Lédée, 2009, Acoustic monitoring of low noise road pavements, Noise Control Eng. J., 57, 50, 10.3397/1.3082400

Anfosso-Lédée, 2007, Temperature effect on tyre–road noise, Appl. Acoust., 68, 1, 10.1016/j.apacoust.2006.06.001

Anfosso-Lédée, 2000, Tire/road noise: comparison of 2D and 3D models for horn effect, Internoise, 2511

Balades, 1995, Permeable pavements: pollution management tools, Water Sci. Technol., 32, 49, 10.2166/wst.1995.0012

Bean, 2007, Field survey of permeable pavement surface infiltration rates, J. Irrigat. Drain. Eng., 133, 249, 10.1061/(ASCE)0733-9437(2007)133:3(249)

Beckenbauer, 2008, Tyre-road noise prediction: a comparison between the SPERoN and HyRoNE models-Part 1, J. Acoust. Soc. Am., 123, 10.1121/1.2934048

Bendtsen, 2009, “Urban thin quiet SMA pavements—paper TRB in Washington 2009, vol. 167

Bendtsen, 2010, Noise management and abatement

Bennert, 2005, Influence of pavement surface type on tire/pavement generated noise, J. Test. Eval., 33, 94

Bernhard, 2005, Basics of noise generation for pavement engineers, Transport. Res. Rec., 1941, 161, 10.1177/0361198105194100121

Bernhard, 2003

Bernhard, 2005

Bilawchuk, 2005, Tire noise assessment of asphalt rubber crumb pavement, Can. Acoust., 33, 37

Biligiri, 2013, Understanding the fundamental material properties of low-noise poroelastic road surfaces, Int. J. Pavement Eng., 14, 12, 10.1080/10298436.2011.608798

Brassart, 1993, A machine to study vertical tire stiffness and damping coefficient, SAE Trans., 272

Brennan, 2001, Case studies of a low-noise road surface, Int. J. Pavement Eng., 2, 121, 10.1080/10298430108901721

Bueno, 2014, Macrotexture influence on vibrational mechanisms of the tyre–road noise of an asphalt rubber pavement, Int. J. Pavement Eng., 15, 606, 10.1080/10298436.2013.790547

Bueno, 2014, Noise reduction properties of an experimental bituminous slurry with crumb rubber incorporated by the dry process, Coatings, 4, 602, 10.3390/coatings4030602

Buret, 2014, Comparative assessment for low-noise pavements by means of the ISO 11819 and the OBSI, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Institute of Noise Control Engineering, 249, 2871

Buytaert, 2014, Differences in rolling noise level between the left and the right tire of a CPX-trailer

CAO, 2005, International and domestic status quo of research on low noise asphalt pavement, Petroleum Asphalt, 19, 50

Cao, 2006, Experimental research and application of skeleton dense-graded noise reduction pavement, J. Tongji Univ. Nat. Sci., 34, 1026

Carswell, 2003

Cesbron, 2008, Influence of road texture on tyre/road contact in static conditions, Road Mater. Pavement Des., 9, 689

Chandran, 2016, Effect of recycled rubber particles and silica on tensile and tear properties of natural rubber composites, Mater. Sci., 22, 256

Chandran, 2018, Evaluation of vibration damping behavior of different sizes of waste tyre rubber in natural rubber composites, J. Compos. Mater., 52, 2493, 10.1177/0021998317748467

Chen, 2016, Rutting-induced permeability loss of open graded friction course mixtures, J. Test. Eval., 44, 719

Chen, 2018, Prediction of tire-pavement noise of porous asphalt mixture based on mixture surface texture level and distributions, Construct. Build. Mater., 173, 801, 10.1016/j.conbuildmat.2018.04.062

Chen, 2018, Evaluation of durability and functional performance of porous polyurethane mixture in porous pavement, J. Clean. Prod., 188, 12, 10.1016/j.jclepro.2018.03.297

Cho, 2008, Study to analyze the effects of vehicles and pavement surface types on noise, Appl. Acoust., 69, 833, 10.1016/j.apacoust.2007.04.006

Choi, 2004, Economic feasibility analysis of roadway capacity expansion with accounting traffic noise barrier cost, Ksce Journal of Civil Engineering, 8, 117, 10.1007/BF02829087

Chu, 2017, Evaluation of wearing course mix designs on sound absorption improvement of porous asphalt pavement, Construct. Build. Mater., 141, 402, 10.1016/j.conbuildmat.2017.03.027

Copeland, 2012, Tire noise pass-by testing system meets latest standards, Sound Vib., 46, 12

Corley-Lay, 2007, Ultrathin bonded wearing course as pavement preservation treatment for jointed concrete pavements, Transport. Res. Rec., 2005, 11, 10.3141/2005-02

Crocker, 2007

Crocker, 2004, Measurement of acoustical and mechanical properties of porous road surfaces and tire and road noise, Transport. Res. Rec., 1891, 16, 10.3141/1891-03

Cui, 2020, Optimizing gradation design for ultra-thin wearing course asphalt, Materials, 13, 189, 10.3390/ma13010189

Dai, 2019

Derksen, 2012, CPX trailer comparison-Round Robin test data analysis, Report D12-02, CROW, Ede, The Netherlands.

Ding, 2013

Dokumaci, 2014, On the effect of viscosity and thermal conductivity on sound propagation in ducts: a re-visit to the classical theory with extensions for higher order modes and presence of mean flow, J. Sound Vib., 333, 5583, 10.1016/j.jsv.2014.06.007

Donavan, 2009

Donavan, 2011, The effects of porous pavements on tire/pavement noise source levels and pass-by measurements

Donavan, 2011

Dong, 2004

Eberhardt, 1981

El-Sebai, 1999, Tire/road interface airborne noise characteristics generation, SAE Trans., 2708

2004

2009

Feng, 2017

Ferguson, 2005

Fujikawa, 2005, Definition of road roughness parameters for tire vibration noise control, Appl. Acoust., 66, 501, 10.1016/j.apacoust.2004.08.007

Fülöp, 2000, Use of friction and texture in pavement performance modeling, J. Transport. Eng., 126, 243, 10.1061/(ASCE)0733-947X(2000)126:3(243)

Gao, 2009

Gao, 2015

Glaeser, 2007

Gonzalez, 2018, Acoustic behaviour of plates made of different materials for measurements with the microphone flush mounted, Appl. Acoust., 132, 135, 10.1016/j.apacoust.2017.11.011

Goubert, 2014, Developing a durable and ultra low noise poroelastic pavement, Proc. Inter-Noise., 249, 4688

Goubert, 2016, The poroelastic road surface (PERS): is the 10 dB reducing pavement within reach?, Materials and Infrastructures, 1, 253, 10.1002/9781119318583.ch19

Graf, 2002, On the horn effect of a tyre/road interface, Part I: experiment and computation, J. Sound Vib., 256, 417, 10.1006/jsvi.2001.4238

Guo, 2018, Study on the influential factors of noise characteristics in dense-graded asphalt mixtures and field asphalt pavements, Shock Vib., 1

Haider, 2008, Austrian experience with the backing board method for statistical pass-by measurements, J. Acoust. Soc. Am., 123

Hamzah, 2012, Permeability loss in porous asphalt due to binder creep, Construct. Build. Mater., 30, 10, 10.1016/j.conbuildmat.2011.11.038

Han, 2005, Noise reduction performance of exposed-aggregate cement concrete pavement, J. Traffic Transport. Eng., 5, 32

Hanson, 2004, 49

Hanson, 2005

Hofman, 2003, Results from the Dutch noise innovation program road traffic (IPG) and roads to the future program (WnT), 32nd International Congress and Exposition on Noise Control Engineering

Hu, 2019, Laboratory investigation of OGFC-5 porous asphalt ultra-thin wearing course, Construct. Build. Mater., 219, 101, 10.1016/j.conbuildmat.2019.04.205

Huang, 2004, Investigation into waste tire rubber-filled concrete, J. Mater. Civ. Eng., 16, 187, 10.1061/(ASCE)0899-1561(2004)16:3(187)

Ibarra, 2016, Characterization of the road surfaces in real time, Appl. Acoust., 105, 93, 10.1016/j.apacoust.2015.10.023

Ingemansson, 1999, Noise control: principles and practices-Part 15, Noise News International, 7, 97

1997

2009

2017

2013

2015

Iwao, 1996, A study on the mechanism of tire/road noise, JSAE Rev., 17, 139, 10.1016/0389-4304(95)00004-6

Kandhal, 1998, Construction and performance of ultrathin asphalt friction course

Kassomenos, 2014, Critical issues on environmental noise: editorial, Sci. Total Environ., 482–483, 399, 10.1016/j.scitotenv.2014.02.108

Kehagia, 2014, Noise reduction in pavement made of rubberized bituminous top layer, Open J. Civ. Eng., 4, 198, 10.4236/ojce.2014.43017

Khankhaje, 2017, Properties of quiet pervious concrete containing oil palm kernel shell and cockleshell, Appl. Acoust., 122, 113, 10.1016/j.apacoust.2017.02.014

Knabben, 2016, Evaluation of sound absorption capacity of asphalt mixtures, Appl. Acoust., 114, 266, 10.1016/j.apacoust.2016.08.008

Kuijpers, 2002, 2494

Kuijpers, 2006

Leng, 2019, Sustainable green pavement using bio-based polyurethane binder in tunnel, Materials, 12, 1990, 10.3390/ma12121990

Li, 2010

Li, 2012

Li, 2018, A state-of-the-art review of measurement techniques on tire–pavement interaction noise, Measurement, 128, 325, 10.1016/j.measurement.2018.06.056

Li, 2019, A review on physical mechanisms of tire-pavement interaction noise, SAE International Journal of Vehicle Dynamics, Stability, and NVH., 3

LI, 2013, Noise characteristics of concrete pavement based on the method of accelerating-falling tire, J. Wuhan Univ. Technol., 35, 59

Li, 2015, Sound absorption measurement of road surface with in situ technology, Appl. Acoust., 88, 12, 10.1016/j.apacoust.2014.07.009

Li, 2016, Impacts of pavement types on in-vehicle noise and human health, J. Air Waste Manag. Assoc., 66, 87, 10.1080/10962247.2015.1119217

Li, 2019, Effect of rubber hardness and tire size on tire-pavement interaction noise, Tire Sci. Technol., 47, 258, 10.2346/tire.18.460412

Licitra, 2019, Modelling of acoustic ageing of rubberized pavements, Appl. Acoust., 146, 237, 10.1016/j.apacoust.2018.11.009

Liu, 2009

Liu, 2016, Effects of double layer porous asphalt pavement of urban streets on noise reduction, International Journal of Sustainable Built Environment, 5, 183, 10.1016/j.ijsbe.2016.02.001

Liu, 2019, Laboratory evaluation of performance of porous ultra-thin overlay, Construct. Build. Mater., 204, 28, 10.1016/j.conbuildmat.2019.01.147

Losa, 2012, A comprehensive model to predict acoustic absorption factor of porous mixes, Mater. Struct., 45, 923, 10.1617/s11527-011-9808-8

Losa, 2010, Empirical rolling noise prediction models based on pavement surface characteristics, Road Mater. Pavement Des., 11, 487, 10.1080/14680629.2010.9690343

Lu, 2000, Sound absorption of cellular metals with semiopen cells, J. Acoust. Soc. Am., 108, 1697, 10.1121/1.1286812

Mansour, 2013, Influence of aggregate gradation on the performance properties of porous asphalt mixtures, J. Mater. Civ. Eng., 25, 281, 10.1061/(ASCE)MT.1943-5533.0000602

Manuel, 2013, Improving the acoustic performance of low noise road surfaces using resonators, J. Acoust. Soc. Am., 133, 3323, 10.1121/1.4805559

McConville, 2004

McDaniel, 2014

Meiarashi, 1996, Noise reduction characteristics of porous elastic road surfaces, Appl. Acoust., 47, 239, 10.1016/0003-682X(95)00050-J

Miljković, 2012, Thin noise-reducing asphalt pavements for urban areas in Germany, Int. J. Pavement Eng., 13, 569, 10.1080/10298436.2011.569028

Miljkovic, 2014, Characterization of noise-reducing capacity of pavement by means of surface texture parameters, J. Mater. Civ. Eng., 26, 240, 10.1061/(ASCE)MT.1943-5533.0000821

Mishra, 2010, Evaluation and analysis of traffic noise along bus rapid transit system corridor, Int. J. Environ. Sci. Technol., 7, 737, 10.1007/BF03326183

Mo, 2014, Mortar fatigue model for meso-mechanistic mixture design of ravelling resistant porous asphalt concrete, Mater. Struct., 47, 947, 10.1617/s11527-013-0105-6

Moore, 2001, Design, construction, and maintenance guidelines for porous asphalt pavements, Transport. Res. Rec., 1778, 91, 10.3141/1778-11

Müller, 2011

Najib, 2011, Correlation between the acoustic and dynamic mechanical properties of natural rubber foam: effect of foaming temperature, Mater. Des., 32, 505, 10.1016/j.matdes.2010.08.030

Naus, 2010, Rollpave, a prefabricated asphalt wearing course, proceedings ISAP Nagoya

Nehdi, 2001, Cementitious composites containing recycled tire rubber: an overview of engineering properties and potential applications, Cem. Concr. Aggregates, 23, 3, 10.1520/CCA10519J

Nelson, 2008, Acoustical absorption of porous pavement. Transportation Research Record, Journal of the Transportation Research Board, 2058, 125, 10.3141/2058-15

2000

Nilsson, 1979, Possible methods of reducing external tire Noise

Nilsson, 1982, Principles in the control of external tire/road noise, 123

Oikonomou, 2009, The use of waste tyre rubber in civil engineering works, 213

Oishi, 2011, Emerging treatments for noise-induced hearing loss, Expet Opin. Emerg. Drugs, 16, 235, 10.1517/14728214.2011.552427

Paje, 2013, Road pavement rehabilitation using a binder with a high content of crumb rubber: influence on noise reduction, Construct. Build. Mater., 47, 789, 10.1016/j.conbuildmat.2013.05.008

Peng, 2012

Perisse, 2002, A study of radial vibrations of a rolling tyre for tyre–road noise characterisation, Mech. Syst. Signal Process., 16, 1043, 10.1006/mssp.2001.1432

Praticò, 2012, Trends and issues in mitigating traffic noise through quiet pavements, Procedia-Social and Behavioral Sciences, 53, 203, 10.1016/j.sbspro.2012.09.873

R51, 2011

Rasmussen, 2012

Rasmussen, 2007

Ren, 2019, A new laboratory test method for tire-pavement noise, Measurement, 145, 137, 10.1016/j.measurement.2019.05.096

Rose, 2003

Roseen, 2012, Water quality and hydrologic performance of a porous asphalt pavement as a storm-water treatment strategy in a cold climate, J. Environ. Eng., 138, 81, 10.1061/(ASCE)EE.1943-7870.0000459

Saberian, 2019, Evaluation of permanent deformation of a new pavement base and subbase containing unbound granular materials, crumb rubber and crushed glass, J. Clean. Prod., 230, 38, 10.1016/j.jclepro.2019.05.100

Saemann, 2012, Tire requirements for pavement surface characteristics, 1

Sandberg, 1979, A road surface for reduction of tire noise emission, vol. 79, 517

Sandberg, 2001, Tyre/road noise: myths and realities

Sandberg, 2002

Sandberg, 2011

Sandberg, 2009

Sandberg, 2010

Schaaf, 1982, Noise radiation from rolling tires-sound amplification by the horn effect

Scholz, 2007, Review of permeable pavement systems, Build. Environ., 42, 3830, 10.1016/j.buildenv.2006.11.016

Shatanawi, 2008

Shatnawi, 2006, Pavement preservation strategy selection in California, 29

Shen, 2015

Shirke, 2009, Cleaning porous pavements using a reverse flush process, J. Transport. Eng., 135, 832, 10.1061/(ASCE)0733-947X(2009)135:11(832)

Sirin, 2019, Evaluation of noise performance of multi-lane highways in the state of Qatar, vol. 517

Staiano, 2018, Tire–pavement noise and pavement texture, J. Transport. Eng., Part B: Pavements., 144

Steere, 1973, Noise levels associated with plant mix seals

Stout, 2003, 1

Sun, 2016

Suresha, 2010, Effect of aggregate gradations on properties of porous friction course mixes, Mater. Struct., 43, 789, 10.1617/s11527-009-9548-1

Suresha, 2010, Laboratory and theoretical evaluation of clogging behaviour of porous friction course mixes, Int. J. Pavement Eng., 11, 61, 10.1080/10298430902730554

Świeczko-Żurek, 2015, Risks related to car fire on innovative Poroelastic Road Surfaces—PERS, Fire Mater., 39, 95, 10.1002/fam.2231

Takahashi, 2013, Comprehensive study on the porous asphalt effects on expressways in Japan: based on field data analysis in the last decade, Road Mater. Pavement Des., 14, 239, 10.1080/14680629.2013.779298

Tao, 2017, Review of cement concrete pavement of noise reduction method

2002

2007

Tehrani, 2015, Noise abatement of rubberized hot mix asphalt: a brief review, International Journal of Pavement Research & Technology, 8, 58

Tian, 2014, Reduction of tire-pavement noise by porous concrete pavement, J. Mater. Civ. Eng., 26, 233, 10.1061/(ASCE)MT.1943-5533.0000809

Tong, 2014, Simulation on the radial tire wear noise, Appl. Mech. Mater., 488, 1121, 10.4028/www.scientific.net/AMM.488-489.1121

Tonin, 2016, Quiet road pavements: design and measurement—state of the art, Acoust Aust., 44, 235, 10.1007/s40857-016-0066-3

Tonin, 2015, RONDA open frame CPX trailer-results of first trials, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Institute of Noise Control Engineering, 250, 3769

Ullrich, 1993, Drum-measurements of tyre noise as a function of roadway temperature and circumferential forces, 659

Vaitkus, 2017, Asphalt wearing course optimization for road traffic noise reduction, Construct. Build. Mater., 345, 10.1016/j.conbuildmat.2017.06.130

Vázquez, 2018, Field assessment of a cold-in place-recycled pavement: influence on rolling noise, J. Clean. Prod., 197, 154, 10.1016/j.jclepro.2018.06.192

Vázquez, 2019, Functional performance of stone mastic asphalt pavements in Spain: acoustic assessment, Coatings, 9, 123, 10.3390/coatings9020123

Vuye, 2016, The acoustical durability of thin noise reducing asphalt layers, Coatings, 6, 21, 10.3390/coatings6020021

Wang, 2011

Wang, 2017, Suitability of PoroElastic Road Surface (PERS) for urban roads in cold regions: mechanical and functional performance assessment, J. Clean. Prod., 165, 1340, 10.1016/j.jclepro.2017.07.228

Wang, 2017, Effects of material composition on mechanical and acoustic performance of poroelastic road surface (PERS), Construct. Build. Mater., 135, 352, 10.1016/j.conbuildmat.2016.12.207

Wei, 2008

Wei, 2004, Research on the reduced noise mechanism of low-noise aphalt pavement, Journal of Heilongjiang Institute of Technology, 18, 11

World Health Organization, 2017

Xiao, 2009, Artificial neural network approach to estimating stiffness behavior of rubberized asphalt concrete containing reclaimed asphalt pavement, J. Transport. Eng., 135, 580, 10.1061/(ASCE)TE.1943-5436.0000014

Xiao, 2009, Asphalt binder rheology sensitivity investigation on resilient modulus of rubberized mixtures using artificial neural network approach, J. Test. Eval., 37, 129

Xie, 2017

Xie, 2019, Permeable concrete pavements: a review of environmental benefits and durability, J. Clean. Prod., 1605, 10.1016/j.jclepro.2018.11.134

Yang, 2002, The function appraise of getting rid of noise of the pavement, Material. East China Highway, 1, 68

Yang, 2003, Primary study of acoustics and vibration feature on stone mastic asphalt pavements, J. Tongji Univ., 31, 370

Yu, 2015, Long-term field performance of porous asphalt pavement in China, Road Mater. Pavement Des., 16, 214, 10.1080/14680629.2014.944205

Zeng, 2015

Zhang, 2019, Noise reduction characteristics of asphalt pavement based on indoor simulation tests, Construct. Build. Mater., 215, 285, 10.1016/j.conbuildmat.2019.04.220

Zhang, 2019, Study of influence factors of noise performance of porous asphalt pavement based on tire-rolling-down method, J. Dalian Univ. Technolgy, 59, 79

Thông tin
Thông tin xuất bản

Journal of Cleaner Production

Tập 287

125056

Thông tin tác giả