Airbrush spray-coating of polymer bulk-heterojunction solar cells

Brabec, 2008 Krebs, 2009, A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules, Sol. Energy Mater. Sol. Cells, 93, 1968, 10.1016/j.solmat.2009.07.015 Blankenburg, 2009, Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells, Sol. Energy Mater. Sol. Cells, 93, 476, 10.1016/j.solmat.2008.12.013 Reyes-Reyes, 2005, High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6) C61 blends, Appl. Phys. Lett., 87–89, 083506, 10.1063/1.2006986 Liang, 2010, For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%, Adv. Mater., 22, E135, 10.1002/adma.200903528 Liang, 2009, Development of new semiconducting polymers for high performance solar cells, J. Am. Chem. Soc., 131, 56, 10.1021/ja808373p Gaudiana, 2008, Fantastic plastic, Nat. Photon., 2, 287, 10.1038/nphoton.2008.69 Dennler, 2009, Polymer–fullerene bulk-heterojunction solar cells, Adv. Mater., 21, 1, 10.1002/adma.200801283 Krebs, 2009, Fabrication and processing of polymer solar cells: a review of printing and coating techniques, Sol. Energy Mater. Sol. Cells, 93, 394, 10.1016/j.solmat.2008.10.004 Schilinsky, 2006, Performance analysis of printed bulk heterojunction solar cells, Adv. Funct. Mater., 16, 1669, 10.1002/adfm.200500581 Ma, 2005, Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology, Adv. Funct. Mater., 15, 1617, 10.1002/adfm.200500211 Krebs, 2009, A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration, Sol. Energy Mater. Sol. Cells, 93, 422, 10.1016/j.solmat.2008.12.001 Kim, 2007, Efficient polymer solar cells fabricated by simple brush painting, Adv. Funct. Mater., 19, 4410, 10.1002/adma.200702040 Shaheen, 2001, Fabrication of bulk heterojunction plastic solar cells by screen printing, Appl. Phys. Lett, 79, 2996, 10.1063/1.1413501 Hoth, 2007, High photovoltaic performance of inkjet printed polymer:fullerene blends, Adv. Mater., 19, 3973, 10.1002/adma.200700911 Vak, 2007, Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation, Appl. Phys. Lett., 91, 081102, 10.1063/1.2772766 Girotto, 2009, Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells, Sol. Energy Mater. Sol. Cells, 93, 454, 10.1016/j.solmat.2008.11.052 Green, 2008, Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition, Appl. Phys. Lett., 92, 033301, 10.1063/1.2836267 Abdellah, 2010, Spray deposition of organic semiconducting thin-films: towards the fabrication of arbitrary shaped organic electronic devices, Org. Electron., 11, 1031, 10.1016/j.orgel.2010.02.018 Hoth, 2009, Topographical and morphological aspects of spray coated organic photovoltaics, Org. Electron., 10, 587, 10.1016/j.orgel.2009.02.010 Na, 2010, Fully spray-coated ITO-free organic solar cells for low-cost power generation, Sol. Energy Mater. Sol. Cells, 94, 1333, 10.1016/j.solmat.2010.01.003 Steirer, 2009, Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells, Thin Solid Films, 517, 2781, 10.1016/j.tsf.2008.10.124 Steirer, 2009, Ultrasonic spray deposition for production of organic solar cells, Sol. Energy Mater. Sol. Cells, 93, 447, 10.1016/j.solmat.2008.10.026 Mikkel Jørgensen, 2008, Stability/degradation of polymer solar cells, Sol. Energy Mater. Sol. Cells, 92, 686, 10.1016/j.solmat.2008.01.005 Kawano, 2006, Degradation of organic solar cells due to air exposure, Sol. Energy Mater. Sol. Cells, 90, 3520, 10.1016/j.solmat.2006.06.041 Hauch, 2008, The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells, Appl. Phys. Lett., 93, 103306, 10.1063/1.2975185 Jin, 2007, Optimization of process parameters for high-efficiency polymer photovoltaic devices based on P3HT:PCBM system, Sol. Energy Mater. Sol. Cells, 91, 1187, 10.1016/j.solmat.2007.04.001 Mihailetchi, 2006, Charge transport and photocurrent generation in poly(3-hexylthiophene):methanofullerene bulk-heterojunction solar cells, Adv. Funct. Mater., 16, 699, 10.1002/adfm.200500420