Transformation from austenite in alloy steels
Tóm tắt
This paper is concerned with the direct transformation of austenite at high temperatures to form ferrite and alloy carbide dispersions. The ferrite/austenite interfaces vary from high energy random boundaries to low energy planar boundaries which grow by step propagation, while the alloy carbide morphologies include a pearlitic form, fine fibers and fine banded arrays of particles. It is shown that these morphologies are closely related to the mode of growth of the ferritic matrix. The role of various alloying elements on the carbide dispersion is examined, and the effects of other metallurgical variables on the banded dispersions are discussed, including factors which influence the dispersion stability. The mechanical properties of directly transformed alloy steels are shown to depend largely on the ferrite grain size and the state of the carbide dispersion. Micro-alloyed steels subjected to controlled rolling provide an excellent example of the achievement of high strength and toughness levels by control of these variables. The paper finally attempts to show how such benefits can be achieved in low and medium alloy steels, and in particular where resistance to creep failure at elevated temperatures is an important property.
Tài liệu tham khảo
R. F. Mehl and W. Hagel:Prog. Met. Phys., 1956, vol. 6, p. 74.
S. Smith:Trans. ASM, 1953, vol. 45, p. 533.
R. F. Mehl, S. Barrett, and D. W. Smith:Trans. AIME, 1933, vol. 105, p. 215.
Y. Liu, H. I. Aaronson, K. R. Kinsman, and M. G. Hall:Met. Trans., 1972, vol. 3,p. 1319.
A. Dubé, H. I. Aaronson, and R. F. Mehl:Rev. Met., 1958, vol. 55, p. 201.
H. I. Aaronson:Decomposition of Austenite by Diffusional Processes, p. 387 ff., Interscience Publishers, New York, 1962.
M. Hillert:Decomposition of Austenite by Diffusional Processes, p. 197 ff. Interscience Publishers, New York, 1962.
K. R. Kinsman and H. I. Aaronson:Met. Trans., 1973, vol. 4, p. 959.
H. I. Aaronson, Laird, and K. R. Kinsman:Phase Transformations, ASM 1970, p. 313ff.
J. V. Bee: Ph.D. Dissertation, University of Cambridge, 1974.
R. J. Dippenaar and R. W. K. Honeycombe:Proc. Roy. Soc., 1973, vol. A333, p. 455.
R. I. Entin:Decomposition of Austenite by Diffusional Processes, p. 295. Inter- science Publishers, New York, 1962.
M. Mannerkoski:Acta. Polytech. Scand., 1964, Ch. 26.
K. Campbell: Ph.D. Dissertation, University of Cambridge, 1971.
V. K. Bungardt, E. Kunze, and E. Korn:Arch. Eisenhutten., 1958, vol. 29, p. 193.
F. G. Berry and R. W. K. Honeycombe:Met. Trans., 1970, vol. 1, p. 3279.
D. V. Edmonds and R. W. K. Honeycombe:J. Iron Steel Inst., 1973, vol. 211, p. 209.
A. T. Davenport, F. G. Berry, and R. W. K. Honeycombe:Met. Sci. J., 1968, vol. 2, p. 104.
J. M. Gray and R. B. S. Yeo:Trans. ASM., 1968, vol. 61, p. 255.
S. Freeman:The Effect of Second Phase Particles on the Mechanical Proper- ties of Steel, IS1 London, 1971, p. 152.
A. T. Davenport and R. W. K. Honeycombe:Proc. Roy. Soc, 1971, vol. 322, p. 191.
J. Tillman and D. V. Edmonds:Metals Tech., 1974, vol. l,p. 456.
W. B. Morrison and J. H. Woodhead:J. Iron Steel Inst., 1963, vol. 201, p. 43.
W. B. Morrison:J. Iron Steel Inst., 1963, vol. 201, p. 317.
W. Leslie:The Relation Between Structure and Mechanical Properties of Metals, NPL Conference 1963, p. 337, HMSO, London.
J. M. Gray, D. Webster, and J. H. Woodhead:J. Iron Steel Inst., 1965, vol. 203, p. 812.
M. Tanino, I. Nishida, I. Ooka, and K. Yoshikawa:Proc. Symp. on Micro- Metallurgy, Jamshedpur, India, 1965.
M. Tanino and K. Aoki:Trans. Iron Steel Inst. Japan, 1968, vol. 8, p. 337.
A. D Batte and R. W. K. Honeycombe:J. Iron Steel Inst., 1973, vol. 211, p. 284;Met. Sci. J., 1973, vol. 7, p. 160.
K. Campbell and R. W. K. Honeycombe:Met. Sci. J., 1974, vol. 8, p. 197.
V. K. Heikinnen:Acta Met., 1973, vol. 21, p. 709;Scandin.J. Met., 1974, vol. 3,p.41.
R. G. Baker and J. Nutting:ISI Special Report, no. 64, 1959, p. 1.
J. Middleton and D. V. Edmonds:Metallogr., 1976, in press.
T. N. Baker:Acta Met., 1973, vol. 21, p. 261.
A. Barbacki and R. W. K. Honeycombe: Metallogr., 1976, in press.
A. D. Batte: Ph.D. Dissertation, University of Cambridge, 1970.
S. Freeman: Ph.D. Dissertation, University of Cambridge, 1971.
H. J. Harding: Ph.D. Dissertation, University of Sheffield, 1966.
D. J. Dyson, S. R. Keown, D. Raynor, and J. A. Whiteman:Acta Met., vol. 14, 1966, p. 867.
D. V. Edmonds:J. Iron Steel Inst., 1972, vol. 210, p. 363.
P. R. Hilyman: Unpublished work.Met. Trans., 1973, vol. 4, p. 959.
D. V. Edmonds: Private communication, University of Cambridge.
D. M. Davies and B. Ralph:J. Iron Steel Inst., 1972, vol. 210, p. 262.
D. M. Schwartz and B. Ralph:Met. Sci. J., 1969, vol. 3, p. 216.
G. L. Dunlop and R. W. K. Honeycombe:Phil. Mag., 1975, vol. 32, p. 61.
K. Kreye:Z. Metallic., 1970, vol. 61, p. 108.
A. J. Ardell:Acta Met., 1972, vol. 20, p. 601.
G. L. Dunlop: Ph.D. Dissertation, University of Cambridge, 1974.
A. H. Bowen and G. M. Leak:Met. Trans., 1970, vol. 1, p. 2767.
G. L. Dunlop and P. J. Turner:Met. Sci., 1975, vol. 9, p. 370.
J. S. T. Van Aswegen, R. W. K. Honeycombe, and D. H. Warrington:Acta Met, 1964, vol. 12, p. I.
S. J. Harris and N. R. Nag:J. Mater. Sci., 1975, vol. 10, p. 1137.
Y. E. Smith and A. Siebert:Met. Trans., 1971, vol. 2, p. 1711.
V. M. Klestov, R. I. Entin, K. N. Sokoiov, G. Y. A. Betin, L. I. Kogan, and N. V. Mikhno:Fiz. Metal. Metalloved, 1972, vol. 33, p. 973.
M. M. Shteinberg, V. I. Filatov, T. I. Shilkova, M. A. Smirnov, and V. N. Gonshar:Steel in the USSR, Oct. 1973, p. 872.
D. J. Walker: Ph.D. Dissertation, University of Cambridge, 1975.
T. Gladman, B. Holmes, and I. D. McIvor:The Effect of Second Phase Parti- cles on the Mechanical Properties of Steel, ISI, 1971, p.58.
F. B. Pickering and T. Gladman:ISI Special Report No. 81, 1963, p. 10.
T. Gladman:Proc. Roy. Soc., 1966, vol. A294, p. 298.
D. V. Edmonds:Met. Trans., 1973, vol. 4, p. 2527.
T. Gladman, I. D. Mclvor, and D. Dulieu:Structure-Property Relationships in Micro-Alloyed Steels, Microalloying 1975, Washington, Oct. 1975.
W. B. Morrison and J. A. Chapman: Controlled Rolling, Rosenhain Centenary Conf., London, Sept. 1975, Proc. Roy. Soc., in press.
G. L. Dunlop and R. W. K. Honeycombe:Met. Sci., 1976, vol. 10, p. 124.
B. Aronsson:Climax Molybdenum Symposium on Steel Strengthening Mech- anisms, 1969, p. 77.