Applied Mechanics and Materials

Công bố khoa học tiêu biểu

* Dữ liệu chỉ mang tính chất tham khảo

Sắp xếp:  
Fire Resistance Performance of Reinforced Concrete Column with Embedded Permanent Formwork Using Woodwool Panel
Applied Mechanics and Materials - Tập 661 - Trang 111-117
Zakiah Ahmad, Nursafarina Ahmad, Azerai Ali Rahman, Hanizah Abdul Hamid, M S Md Noh
This paper reports the investigation on the fire resistance performance of reinforced concrete column with embedded permanent formwork from woodwool board (WWCB). A series of slender column embedded with and without WWCB with cross-sections 200 mm x 200 mm for column without WWCB and 300 mm x 300 mm with embedded 50 mm thick WWCB. The height of the slender column was 2000 mm. The fire resistance t... hiện toàn bộ
Insect Olfactory Receptors as Essential Detectors for Volatile Chemicals in Biomimetic Odorant Sensors
Applied Mechanics and Materials - Tập 461 - Trang 822-828
Yan Liu, Qian Chen, Ya Hui Man, Wen Jian Wu
Insect has a highly sensitive and accurate discrimination capacity for sensing odorants in the environment, though its olfactory system is much simpler than mammalians. Insect olfactory receptor (OR) proteins play key roles in odor detection and discrimination. Unlike the complex olfactory signaling in mammalian, the insect ORs can be directly gated by odorants, and can function without the co-exp... hiện toàn bộ
Compressive Resistance of Environmental Concrete Using Fly Ash and Fine Aggregate for Replacing Traditional Sand
Applied Mechanics and Materials - Tập 889 - Trang 283-288 - 2019
Duy Liem Nguyen, Minh Thuan Duong
#Artificial Sand;Environment;Fine Aggregate;Fly Ash;Landslide
The Experimental Investigation of the Biomass-Fired ORC System with a Radial Microturbine
Applied Mechanics and Materials - Tập 831 - Trang 235-244
Tomasz Z. Kaczmarczyk, Grzegorz Żywica, Eugeniusz Ihnatowicz
The paper presents the results of experimental investigation of the ORC system with a droplet separator (which was used to improve the quality of working medium vapour), a radial microturbine and a multi-fuel boiler. The research aimed at verifying the correctness of prototype microturbine performance in the ORC installation, equipped with a heat source in the form of the multi-fuel boiler. During... hiện toàn bộ
An Analysis of the Blog-User Attitude Employing Structural Equation Modeling Combine TAM and TPB Model
Applied Mechanics and Materials - Tập 411-414 - Trang 90-93
Wei‐Shang Fan, Y. K. Haung, Hsiao-hui Hsu, C. C. Chen
This paper examines key motivators for consumers attitude towards continuing the reception of existing blog services. Multiple theoretical perspectives are synthesized to hypothetically construct a model of continuance behavior, which is then empirically tested using a field survey of online blog users, and Technology Acceptance Model (TAM) and Theory of Planned Behavior (TPB) are the studys theor... hiện toàn bộ
Effect of Hydrogen Yield by Thermophilic Anaerobic Fermentation from Mixed Organic Wastes
Applied Mechanics and Materials - Tập 135-136 - Trang 487-497 - 2012
Jung Hsing Chen, Kuen Sheng Wang, Dinh Hieu Vu
#Anaerobic Fermentation;Cow Manure;Food Waste;Sewage Sludge;Thermophilic
Force Controlled Grinding of Ceramic Materials
Applied Mechanics and Materials - Tập 794 - Trang 270-277
Timo Dörgeloh, Lars Schönemann, Carla Flosky, E. Brinksmeier
Brittle materials like ceramics or glass can be machined by cutting with negative rake angles and by abrasive machining processes. Especially grinding allows for low surface roughness and high shape accuracy. Conventional path-controlled grinding processes may damage functional surfaces if brittle fracture occurs and may thus lead to lateral, radial and axial cracks. High grinding forces can be a ... hiện toàn bộ
The Thermal Structure Coupling Analysis of Hydrostatic Motorized Spindle in Ultra-Precision Grinding Machine
Applied Mechanics and Materials - Tập 607 - Trang 427-430
Yi Cui, Hao Lin Li, Haitao Huang, Xiao Xin
For the hard and brittle materials like optical glasses, ultra-precision grinding machine is primarily used, which can generate parts with high surface finish, high form accuracy and surface integrity. Motorized spindle is an inevitable choice of ultra-precision machine, but it has a prominent heat problem for its specific configuration of build-in motor. The paper does some research about motoriz... hiện toàn bộ
Study on Precision Grinding Technique for Large Size Optical Aspheric Lens
Applied Mechanics and Materials - Tập 395-396 - Trang 1015-1019
Xiao Ke, Jian Chun Liu, Hai Bin Huang
Large size optical aspheric lens is an important component in optical engineering. Aiming at the demand of precision processing for optical aspheric lens, this paper develops a precision grinding technique for large size optical aspheric lens. Based on precision surface grinding machine (MGK7160), grating-type parallel grinding method is put forward to realize grinding paths planning for optical a... hiện toàn bộ
A Methodology for Generating a Variable-Pitch Rotor of Twin-Screw Vacuum Pump
Applied Mechanics and Materials - Tập 889 - Trang 475-483
Van-The Tran
The twin-screw vacuum pump is widely used in low and medium-low vacuum applications. Its core element consists of a pair of rotors rotating in opposite direction on parallel axes. Screw rotors with uniform pitch are usually finished by the form grinding method, but the rotors with variable pitch are not. In this paper, a manufacturing process for generating the tooth profile of the screw rotor wit... hiện toàn bộ
Tổng số: 58   
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6