Utilization of exhausted dust from FCC flue gas as material for FCC catalyst preparation

Applied Petrochemical Research - Tập 5 - Trang 215-220 - 2015
Zejun Zuo1,2, Lingling Lv3, Chenguang Liu1, Xingong Zhang3
1State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Qingdao, China
2The Refinery of Zhongyuan Oilfield Company, SINOPEC, Puyang, China
3Qingdao Huicheng Petrochemical Technology Co., Ltd, Qingdao, China

Tóm tắt

In this paper, new matrix and corresponding fluidized catalytic cracking (FCC) catalysts were prepared by reutilizing the exhausted dust which was derived from fluidized catalytic cracking flue gas. The results showed that the new matrix has wider mesopore size distribution than pseudo-boehmite binder. With the increase of the additional amount of this new matrix, FCC catalyst possessed increased micro-activity test conversion of vacuum gas oil (VGO) from 68 % to 71 %. The catalytic cracking performance on a fixed fluidized bed unit showed that compared with CAT-1, the conversion of VGO on CAT-5 increased by 1.19 %, heavy oil yield and coke yield decreased by 2.16 and 1.65 %, respectively. Besides, the total liquid yield and light oil yield increased by 2.27 and 2.26 %, respectively. The reaction performance of CAT-3 and CAT-5 is obviously superior to CAT-1. The appropriate pore structures and crystallized Y zeolite component on this new matrix improve the cracking ability of FCC catalysts.

Tài liệu tham khảo