Thermodynamic, Kinetic, and Equilibrium Parameters for the Removal of Lead and Cadmium from Aqueous Solutions with Calcium Alginate Beads

Hindawi Limited - Tập 2014 - Trang 1-9 - 2014
Ruth Alfaro‐Cuevas‐Villanueva1, Aura Roxana Hidalgo-Vázquez1, Consuelo de Jesús Cortés Penagos2, Raúl Cortés‐Martínez2
1Instituto de Investigaciones Químico Biológicas, Universidad Michoacana de San Nicolás de Hidalgo, CP 58060, Edif. B1., CU, Morelia, MICH, Mexico
2Facultad de Químico Farmacobiología, Universidad Michoacana de San Nicolás de Hidalgo, Tzintzuntzan 173 Col. Matamoros, CP 58240, Morelia, MICH, Mexico

Tóm tắt

The sorption of cadmium (Cd) and lead (Pb) by calcium alginate beads (CAB) from aqueous solutions in batch systems was investigated. The kinetic and thermodynamic parameters, as well as the sorption capacities of CAB in each system at different temperatures, were evaluated. The rate of sorption for both metals was rapid in the first 10 minutes and reached a maximum in 50 minutes. Sorption kinetic data were fitted to Lagergren, pseudo-second-order and Elovich models and it was found that the second-order kinetic model describes these data for the two metals; comparing kinetic parameters for Cd and Pb sorption a higher kinetic rate (K2) for Pb was observed, indicating that the interaction between lead cations and alginate beads was faster than for cadmium. Similarly, isotherm data were fitted to different models reported in literature and it was found that the Langmuir-Freundlich (L-F) and Dubinin-Radushkevich (D-R) models describe the isotherms in all cases. CAB sorption capacity for cadmium was 27.4 mg/g and 150.4 mg/g for lead, at 25°C. Sorption capacities of Cd and Pb increase as temperature rises. According to the thermodynamic parameters, the cadmium and lead adsorption process was spontaneous and endothermic. It was also found that pH has an important effect on the adsorption of these metals by CAB, as more were removed at pH values between 6 and 7.

Từ khóa


Tài liệu tham khảo

2007, Información Tecnológica, 18, 9

10.1081/SS-120016698

2006, Revista Latinoamericana de Recursos Naturales, 2, 47

10.1016/j.jhazmat.2008.07.015

2006, African Journal of Biotechnology, 5, 1819

10.1080/07388550500248571

10.1016/S0043-1354(00)00270-0

10.1016/j.cej.2010.05.049

10.1016/j.jhazmat.2010.12.102

10.1016/j.powtec.2011.10.023

10.1021/es00027a007

2000, Advances in Environmental Research, 4, 19, 10.1016/S1093-0191(00)00004-6

10.1080/01496390701784112

2011, Journal of Applied Sciences in Environmental Sanitation, 6, 447

10.1016/j.biortech.2005.02.027

1993, Water Science & Technology, 28, 247, 10.2166/wst.1993.0114

10.1016/j.biortech.2005.09.016

2009, Dyna, 76, 95

10.1021/es9606790

1898, Handlinger, 24, 1

2000, Adsorption Science and Technology, 18, 639, 10.1260/0263617001493693

10.1016/S0043-1354(00)00306-7

1960, Chemical Reviews, 60, 267, 10.1021/cr60205a003

10.1016/j.biortech.2008.11.016

10.1016/j.jhazmat.2007.05.055

10.1016/S0043-1354(99)00232-8

10.1016/j.desal.2011.03.092

10.1007/s11270-011-0877-7

2004, Separation Science and Technology, 39, 2711, 10.1081/SS-200026766

10.1016/j.jenvman.2011.11.010

10.1021/bp990002r

10.1007/s11356-011-0537-x

10.1016/j.desal.2007.06.011

1994, Reactive Polymers, 23, 147, 10.1016/0923-1137(94)90015-9

1995, Biotechnology Progress, 11, 235, 10.1021/bp00033a001

10.1016/j.apsusc.2011.11.126

10.1023/A:1021304828010

10.1080/01496390500267467

10.1021/ie060016j

1972, Journal of Colloid And Interface Science, 38, 185, 10.1016/0021-9797(72)90233-0

10.1016/j.jhazmat.2006.06.095

10.1023/B:JRNC.0000011757.59069.ba