Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process

B.V. Hooreweder, D. Moens, R. Boonen, J. Kruth, and P. Sas, Polym. Test. 32, 972 (2013).

E.O. Olakanmia and J. Mats, Process. Technol. 213, 1387 (2013).

K.N. Han and N.S. Kim, KONA Powder Part. J. 27, 73 (2009).

L.E. Murr, K.N. Amato, S.J. Li, Y.X. Cheng, S.M. Gaytan, E. Martinez, P.W. Shindo, F.R. Medina, and R.B. Wicker, J. Mech. Behav. Biomed. Mater. 4, 1396 (2011).

L.E. Murr, S.M. Gaytan, D.A. Ramirez, E. Martinez, J. Hernandez, K.N. Amato, P.W. Shindo, F.R. Medina, and R.B. Wicker, J. Mater. Sci. Technol. 28, 1 (2012).

N.S. Kim and K.N. Han, J. Appl. Phys. 108, 102801 (2010).

Ph Bertrand, F. Bayle, C. Combe, P. Goeuriot, and I. Smurov, Appl. Surf. Sci. 254, 989 (2007).

S.H. Ahn, M. Montero, D. Odell, S. Roundy, and P.K. Wright, Rapid Prototyp. 8, 248 (2002).

A. Bellini and S. Guceri, Rapid Prototyp. 9, 252 (2003).

A.K. Sood, R.K. Ohdar, and S.S. Mahapatra, Mater. Des. 31, 287 (2010).

S.H. Masood and W.Q. Song, Mater. Des. 25, 587 (2004).

S.H. Masood and W.Q. Song, Assem. Autom. 25, 309 (2005).

N. Saude, S.H. Masood, M. Nikzad, M. Ibrahim, and M.H.I. Ibrahim, Int. J. Eng. Res. Appl. 3, 1257 (2013).

J.D. Bronzino, The Biomedical Engineering Handbook, 2nd ed. (Boca Raton: CRC, 2000).

M. Leeuwen, N.A.A. Buijs, A.B. Canelas, J.J. Heijnen, and W.M. Gulik, Chem. Eng. Sci. 64, 1877 (2009).