Theoretical framework for predicting solute concentrations and solute-induced stresses in finite volumes with arbitrary elastic fields
Tóm tắt
A theoretical model for computing the interstitial solute concentration and the interstitial solute-induced stress field in a three-dimensional finite medium with any arbitrary elastic fields was developed. This model can be directly incorporated into two-dimensional or three-dimensional discrete dislocation dynamics simulations, continuum dislocation dynamics simulations, or crystal plasticity simulations. Using this model, it is shown that a nano-hydride can form in the tensile region below a dissociated edge dislocation at hydrogen concentration as low as χ0=5×10−5, and its formation induces a localized hydrogen elastic shielding effect that leads to a lower stacking fault width for the edge dislocation. Additionally, the model also predicts the segregation of hydrogen at Σ109(13 7 0)/33.4∘ symmetric tilt grain boundary dislocations. This segregation strongly alters the magnitude of the shear stresses at the grain boundary, which can subsequently alter dislocation-grain boundary interactions and dislocation slip transmissions across the grain boundary. Moreover, the model also predicts that the hydrogen concentration at a mode-I central crack tip increases with increasing external loading, higher intrinsic hydrogen concentration, and/or larger crack lengths. Finally, linearized approximate closed-form solutions for the solute concentration and the interstitial solute-induced stress field were also developed. These approximate solutions can effectively reduce the computation cost to assess the concentration and stress field in the presence of solutes. These approximate solutions are also shown to be a good approximation when the positions of interest are several nanometers away (i.e. long-ranged elastic interactions) from stress singularities (e.g. dislocation core and crack tip), for low solute concentrations, and/or at high temperatures.
Tài liệu tham khảo
J. Alberty, C. Carstensen, S. A. Funken, R. Klose, Matlab implementation of the finite element method in elasticity. Computing. 69(3), 239–263 (2002).
S. Aubry, D. A. Hughes, Reductions in stacking fault widths in FCC crystals: Semiempirical calculations. Phys. Rev. B. 73(22), 224116 (2006).
D. M. Barnett, W. C. Oliver, W. D. Nix, The binding force between an edge dislocation and a fermi-dirac solute atmosphere. Acta Metall. 30(3), 673–678 (1982a).
D. M. Barnett, G. Wong, W. D. Nix, The binding force between a peierls-nabarro edge dislocation and a fermi-dirac solute atmosphere. Acta Metall.3(11), 2035–2041 (1982b).
A. Barnoush, H. Vehoff, In situ electrochemical nanoindentation: A technique for local examination of hydrogen embrittlement. Corros. Sci.50(1), 259–267 (2008).
C. Barouh, T. Schuler, C. -C. Fu, M. Nastar, Interaction between vacancies and interstitial solutes (c, n, and o) in α- fe: From electronic structure to thermodynamics. Phys. Rev. B. 90(5), 054112 (2014).
O. Barrera, E. Tarleton, H. Tang, A. Cocks, Modelling the coupling between hydrogen diffusion and the mechanical behaviour of metals. Comp. Mater. Sci.122:, 219–228 (2016).
A. Becker, The boundary element method in engineering: a complete course, Vol. 19 (McGraw-Hill, London, 1992).
W. Cai, R. B. Sills, D. M. Barnett, W. D. Nix, Modeling a distribution of point defects as misfitting inclusions in stressed solids. J. Mech. Phys. Solids. 66:, 154–171 (2014).
W. Cai, W. D. Nix, Imperfections in crystalline solids (Cambridge University Press, Cambridge, 2016).
G. M. Castelluccio, D. L. McDowell, Mesoscale cyclic crystal plasticity with dislocation substructures. Int. J. Plast.98:, 1–26 (2017).
G. M. Castelluccio, C. B. Geller, D. L. McDowell, A rationale for modeling hydrogen effects on plastic deformation across scales in FCC metals. Int. J. Plast.111:, 72–84 (2018).
M. Q. Chandler, M. F. Horstemeyer, M. I. Baskes, G. J. Wagner, P. M. Gullett, B. Jelinek, Hydrogen effects on nanovoid nucleation at nickel grain boundaries. Acta Mater.56(3), 619–631 (2008).
J. P. Chateau, D. Delafosse, T. Magnin, Numerical simulations of hydrogen–dislocation interactions in FCC stainless steels.: part II: hydrogen effects on crack tip plasticity at a stress corrosion crack. Acta Mater.50(6), 1523–1538 (2002).
A. H. Cottrell, B. A. Bilby, Dislocation theory of yielding and strain ageing of iron. Proc. Phys. Soc. Sec. A. 62(1), 49 (1949).
Y. Cui, G. Po, N. M. Ghoniem, A coupled dislocation dynamics-continuum barrier field model with application to irradiated materials. Int. J. Plast.104:, 54–67 (2018).
J. A. El-Awady, H. Fan, A. M. Hussein, in Multiscale Materials Modeling for Nanomechanics. Advances in discrete dislocation dynamics modeling of size-affected plasticity (Springer, 2016), pp. 337–371. https://doi.org/10.1007/978-3-319-33480-6_11.
B. Galerkin, Contribution à la solution générale du problème de la théorie de l’élasticité dans le cas de trois dimensions. CR Acad. Sci. Paris. 190:, 1047–1048 (1930).
V. G. Gavriljuk, A. L. Sozinov, J. Foct, J. N. Petrov, Y. A. Polushkin, Effect of nitrogen on the temperature dependence of the yield strength of austenitic steels. Acta Mater.46(4), 1157–1163 (1998).
Y. Gu, J. A. El-Awady, Quantifying the effect of hydrogen on dislocation dynamics: A three-dimensional discrete dislocation dynamics framework. J. Mech. Phys. Solids. 112:, 491–507 (2018).
M. E. Gurtin, in Linear Theories of Elasticity and Thermoelasticity. The linear theory of elasticity (Springer, 1973), pp. 1–295. https://doi.org/10.1007/978-3-662-39776-3_1.
JP. Hirth, J. Lothe, Theory of Dislocations (Wiley, New York, 1982).
J. P. Hirth, D. M. Barnett, R. G. Hoagland, Solute atmospheres at dislocations. Acta Mater.131:, 574–593 (2017).
J. A. Hurtado, B. R. Elliott, H. M. Shodja, D. V. Gorelikov, C. E. Campbell, H. E. Lippard, T. C. Isabell, J. Weertman, Disclination grain boundary model with plastic deformation by dislocations. Mater. Sci. and Eng. A. 190(1-2), 1–7 (1995).
S. Jiang, M. Rachh, Y. Xiang, An efficient high order method for dislocation climb in two dimensions. Multiscale Model. Simul.15(1), 235–253 (2017).
A. G. Khachaturyan, Theory of structural transformations in solids. (Courier Corporation, New York, 2013).
B. Kuhr, D. Farkas, I. M. Robertson, Atomistic studies of hydrogen effects on grain boundary structure and deformation response in FCC Ni. Comp. Mater. Sci.122:, 92–101 (2016).
Y. J. Kwon, S. -P. Jung, B. -J. Lee, C. S. Lee, Grain boundary engineering approach to improve hydrogen embrittlement resistance in femnc twip steel. Int. J. Hydrog. Energy. 43(21), 10129–10140 (2018).
S. Lavenstein, J. A. El-Awady, Micro-scale fatigue mechanisms in metals: Insights gained from small-scale experiments and discrete dislocation dynamics simulations. Curr. Opin. Solid State Mater. Sci.23(5), 100765 (2019).
T. C. Lee, I. M. Robertson, H. K. Birnbaum, An in situ transmission electron microscope deformation study of the slip transfer mechanisms in metals. Metall. Mater. Trans. A. 21(9), 2437–2447 (1990).
J. C. M. Li, Disclination model of high angle grain boundaries. Surf. Sci.31:, 12–26 (1972).
G. Lu, Q. Zhang, N. Kioussis, E. Kaxiras, Hydrogen-enhanced local plasticity in aluminum: an ab initio study. Phys. Rev. Lett.87(9), 095501 (2001).
G. Lu, D. Orlikowski, I. Park, O. Politano, E. Kaxiras, Energetics of hydrogen impurities in aluminum and their effect on mechanical properties. Phys. Rev. B. 65(6), 064102 (2002).
Y. Matsuda, H. Nishiguchi, T. Fukuda, Effects of large amounts of hydrogen on the fatigue crack growth behavior of torsional prestrained carbon steel. Frattura Integr. Strutt.10(35), 1–10 (2016).
J. C. Maxwell, I.—on reciprocal figures, frames, and diagrams of forces. Earth Environ. Sci. Trans. R. Soc. Edinb. 26(1), 1–40 (1870).
H. Neuber, Ein neuer ansatz zur lösung räumlicher probleme der elastizitätstheorie. der hohlkegel unter einzellast als beispiel. J. Appl. Math. Mech./Z. Angew. Math. Mech.14(4), 203–212 (1934).
P. F. Papkovich, The representation of the general integral of the fundamental equations of elasticity theory in terms of harmonic functions, Izv. Akad. Nauk SSSR. Phys. Math. Ser.10(1425), 90 (1932).
I. M. Robertson, P. Sofronis, A. Nagao, M. L. Martin, S. Wang, D. W. Gross, K. E. Nygren, Hydrogen embrittlement understood. Metall. Mater. Trans. A. 46(6), 2323–2341 (2015).
R. Rostamian, The completeness of maxwell’s stress function representation. J. Elast.9(4), 349–356 (1979).
M. H. Sadd, Elasticity: theory, applications, and numerics (Academic Press, Oxford, 2009).
R. B. Schwarz, A. G. Khachaturyan, Thermodynamics of open two-phase systems with coherent interfaces: Application to metal–hydrogen systems. Acta Mater.54(2), 313–323 (2006).
R. B. Sills, W. Cai, Free energy change of a dislocation due to a cottrell atmosphere. Phil. Mag.98(16), 1491–1510 (2018).
P. Sofronis, H. K. Birnbaum, Mechanics of the hydrogen-dislocation-impurity interactions–I. increasing shear modulus. J. Mech. Phys. Solids. 43(1), 49–90 (1995).
Q. Song, Z. Li, Y. Zhu, M. Huang, On the interaction of solute atoms with circular inhomogeneity and edge dislocation. Int. J. Plast.111:, 266–287 (2018).
J. Song, M. Soare, W. A. Curtin, Testing continuum concepts for hydrogen embrittlement in metals using atomistics. Model. Sim. Mater. Sci. Eng.18(4), 045003 (2010).
Y. Tang, J. A. El-Awady, Atomistic simulations of the interactions of hydrogen with dislocations in FCC metals. Phys. Rev. B. 86(17), 174102 (2012).
Z. Tarzimoghadam, D. Ponge, J. Klöwer, D. Raabe, Hydrogen-assisted failure in ni-based superalloy 718 studied under in situ hydrogen charging: the role of localized deformation in crack propagation. Acta Mater.128:, 365–374 (2017).
A. Udyansky, J. von Pezold, V. N. Bugaev, M. Friák, J. Neugebauer, Interplay between long-range elastic and short-range chemical interactions in fe-c martensite formation. Phys. Rev. B. 79(22), 224112 (2009).
E. Van der Giessen, A. Needleman, Discrete dislocation plasticity: a simple planar model. Model. Simul. Mater. Sci. Eng.3(5), 689 (1995).
J. von Pezold, L. Lymperakis, J. Neugebauer, Hydrogen-enhanced local plasticity at dilute bulk H concentrations: The role of H-H interactions and the formation of local hydrides. Acta Mater.59(8), 2969–2980 (2011).
C. Wagner, Contribution to the thermodynamics of interstitial solid solutions. Acta Metall.19(8), 843–849 (1971).
G. -J. Wang, V. Vitek, Relationships between grain boundary structure and energy. Acta Metal.34(5), 951–960 (1986).
S. Wang, M. L. Martin, I. M. Robertson, P. Sofronis, Effect of hydrogen environment on the separation of Fe grain boundaries. Acta Mater.107:, 279–288 (2016).
M. Wen, S. Fukuyama, K. Yokogawa, Cross-slip process in FCC nickel with hydrogen in a stacking fault: An atomistic study using the embedded-atom method. Phys. Rev. B. 75(14), 144110 (2007).
M. Wen, A. Barnoush, K. Yokogawa, Calculation of all cubic single-crystal elastic constants from single atomistic simulation: Hydrogen effect and elastic constants of nickel. Comput. Phys. Commun.182(8), 1621–1625 (2011).
W. G. Wolfer, M. I. Baskes, Interstitial solute trapping by edge dislocations. Acta Metall.33(11), 2005–2011 (1985).
H. Yu, A. Cocks, E. Tarleton, Discrete dislocation plasticity helps understand hydrogen effects in BCC materials. J. Mech. Phys. Solids.123:, 41–60 (2019a).
H. Yu, I. H. Katzarov, T. Paxton, A. Cocks, E. Tarleton, Multiscale modelling of the influence of hydrogen on dislocation junctions in BCC iron. arXiv preprint arXiv:1906.05344 (2019b).
H. Yu, A. Cocks, E. Tarleton, The influence of hydrogen on lomer junctions. Scripta Mater.166:, 173–177 (2019).
Y. Zhu, Y. Xiang, A continuum model for dislocation dynamics in three dimensions using the dislocation density potential functions and its application to micro-pillars. J. Mech. Phys. Solids. 84:, 230–253 (2015).
O. C. Zienkiewicz, R. L. Taylor, The finite element method for solid and structural mechanics (Butterworth-Heinemann, Oxford, 2005).
a, Partial Differential Equation Toolbox™User’s Guide (The MathWorks, Inc.,Natick, 2018).