The use of via holes for controlling the crosstalk of nonparallel microstrip lines on PCBs
2002 IEEE International Symposium on Electromagnetic Compatibility - Tập 2 - Trang 633-638 vol.2
Tóm tắt
In this work, the metal filled via holes are constructed into fences between the nonparallel microstrip lines to control the crosstalk. In practice, coupling between nonparallel traces is common. On the other hand, via holes are easy and inexpensive to build using the current fabrication process for the commonly used PCBs. The effects of the via holes for alleviating the coupling are investigated experimentally and numerically. The crosstalk is controlled by adjusting the position of the via holes, the structure of via fence, and the length of the via fence. Some design guidelines for the proper placement of the via holes are concluded. Experiments are conducted and the calculated results are compared with the measured data.
Từ khóa
#Crosstalk #Microstrip #Coupling circuits #Microwave circuits #Communication system control #Fabrication #Guidelines #Frequency #Packaging #Electromagnetic interferenceTài liệu tham khảo
10.1109/ISEMC.2001.950723
haussmann, 1999, Impact on radiated emission of printed circuit boarding stitching, Proc IEEE Int Symp Electromagnetic Compatibility, 793
ye, 2001, EMI mitigation with multilayer power-bus stacks and via stitching of reference planes, IEEE Trans Electromagn Compat, 43, 538, 10.1109/15.974633
10.1109/6668.951551
edwards, 1981, Foundation for Microstrip Circuit Design
10.1109/ECTC.2002.1008118
10.1109/MWSYM.2001.967237
10.1109/ISEMC.1995.523601
10.1109/6040.909628
10.1109/6040.826766
10.1109/MWSYM.2001.967238
onodera, 1996, Folded U-sbaped microwave technology for ultra-compact three-dimensional MMIC's, IEEE Trans Microwave Theory Tech, 44, 2347
10.1109/15.974637
10.1109/15.135623
britt, 1997, Effect of gapped ground planes and guard traces on radiated EMI, Proc IEEE Int Symp Electromagnetic Compatibility, 159