The influence of triggers geometry upon the stiffness of cylindrical thin walled tubes
Tóm tắt
Today’s automobile manufacturers are increasingly using lightweight materials to reduce weight; these include plastics, composites, aluminium, magnesium alloys, and also new types of high strength steels. Many of these materials have limited strength or ductility, therefore in many cases the rupture being serious consequences during crashes, underscore Picketta et al. in their studies. Automotive structures must deform plastically in a short period of time, a few milliseconds, to absorb the crash energy in a controllable manner. It must be light and enable economically mass-production [1]. FE models rapidly gained acceptance among engineers. Many other factors facilitated the development of vehicle models by shell finite elements since most of the geometry of the structural surfaces was already on computer graphic files. Kee Poong Kim and Hoon Huh emphasize that the crashworthiness of each vehicle part needs to be evaluated at the initial stage of design for good performance of an assembled vehicle. As the dynamic behaviour of structural members is different from the static one, the crashworthiness of the vehicle structures has to be assessed by impact analysis. The paper analyzes the influence of trigger geometry upon the compression of thin-walled cylindrical tubes. Simulations performed on a simple model showed the dependence between triggers area and deformation times as well as the maximum deformations obtained for various speeds at which the simulations ware carried out. Likewise, the geometry of trigger leads to different results.
Tài liệu tham khảo
Du Bois P., Chou C., Fileta B., Khalil T., King A., Mahmood H., Mertz H., Wismans J., Vehicle Crashworthiness and Occupant Protection, American Iron and Steel Institute, 2000 Town Center Southfield, Michigan, 2004
Wang Yu., Mason T., Two dimensional rigid body collision with friction, ASME Journal of Applied Mechanics, vol. 59, 1992
Gupta N., Sekhon G., Gupta P., A study of fold formation in axisymetric axial collapse of round tubes, International Journal of Impact Engineering, vol 27, 2002, 87–117, PERGAMON
Picketta A. K., Pyttelb T., Payenb F., Lauroc F., Petrinicd N., Wernere H., Christlein J., Failure prediction for advanced crashworthiness of transportation vehicles, International Journal of Impact Engineering 30, 2004, 853–872
Sunghak L., & others, Effect of Troggering on the energy absorbtion capacity of axial compressed aluminium tubes, Materials and design, 20, 1999, 31–40
Marsolek J., Reimerdes H. G., Energy absorption of metallic cylindrical shells with induced non axysimmetric folding patterns, International Journal of Impact Engineering 30, 2004, 1209–1223
Pawlus W., Reza H., Robbersmyr K. G., Development of lumped-parameter mathematical models for a vehicle localized impact, Journal of Mechanical Science and Technology 25(7), 2011, 1737–1747
Tabacu S., Modele pentru studiul impactului frontal si lateral la automobile de fabricatie româneascǧa, teza de doctorat, 2002
Pawlus W., Reza H., Robbersmyr K. G., Application of viscoelastic hybrid models to vehicle crash simulation, International Journal of Crashworthiness 16(2), ISSN 1358-8265, 195–205
Dimas D., Alves A., Peixinho, N., Soares D., Vilarinho C., Configurable thermal induced triggers for crashworthiness application, Proceedings of conference SMART’ 09-Smart Structures and Materials, Porto, Portugal, Julho de 2009
Peixinho N., Pinho A., Study of viscoplasticity models for the impact behaviour of high-strength steels, Journal of Computational and Nonlinear Dynamics, Vol 2, 114–123, 2007
Ponomariov S. D., Calculul de rezistenţǧ în construcţia de maşini, Editura Tehnicǧ Bucureşti, vol 3, 1964, 519–548, vol 3
Prochowski L., Zuchowski A., Comparative analysis of frontal zone of deformation in vehicles with selfsupporting and framed bodies, Journal of KONES Powertrain and Transport, Vol. 18, No. 4-2011
Ono T., Shimizu I., Tada N., Takubo N, Study on Deformation of Rectangular Metal Tube during Dynamic Three-Point Bending for Modeling of Pole Side Impact of Vehicle
Belcher T., Analysis of Vehicle Structural Deformation in Oblique, Perpendicular, and Offset Perpendicular Pole Side Impact, 2nd Meeting — GRSP Informal Group on Pole Side Impact Brussels, Belgium, 3–4 March 2011
Soica A., Ispas N., Establishing the Stiffness Coefficient of a Structure by Aproximating the Deceleration Curve with Polinomial Laws of Various Degrees, Proceedings extended abstracts of the annul session of scientific papers IMT Oradea-2012
Gaiginschi R., Filip I., Technical expertise of road accidents, Editura Tehnica, 2002, 195–198, Gaiginschi, R., Filip, I., Expertiza tehnicǧ a accidentelor de circulatie, Editura Tehnica, 2002, 195–198
Kee Poong, Kim, Hoon, Huh, Dynamic limit analysis formulation for impact simulation of structural members, International Journal of Solids and Structures 43, 2006, 6488–6501